Professional Documents
Culture Documents
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
1
SMVector SMVector Labs
Form A
Programmable Relay
Terminals
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
2
SMVector
3 Wire Start/Stop
We want to set the drive up to use external
inputs to start and stop the motor.
To do this we need to set
Parameter P100 – “Start Control Source”
to
1 - “Use start/stop circuit wired into the
terminal strip”.
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
3
SMVector SMVector Labs
3 Wire Start/Stop
We want to set the drive up to use the TB-13A Input as the
start switch to start the motor in the forward direction.
To do this we need to set
Parameter P121 – “TB-13A Input Function”
to
11 – “Start Forward”
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
4
SMVector SMVector Labs
3 Wire Start/Stop
Form A
Programmable Relay
Terminals
Green
Green
Red
Parameter Settings:
P100 Set to 01 (terminal strip control)
P121 Set to 11 (terminal 13A as start forward)
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
5
SMVector SMVector Labs
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
6
SMVector SMVector Labs
Form A
Programmable Relay
Terminals
Start/Stop
Contact
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
7
SMVector
2 Wire Start/Stop
We want to set the drive up to use external
inputs to start and stop the motor.
To do this we need to set
Parameter P100 – “Start Control Source”
to
1 - “Use start/stop circuit wired into the
terminal strip”.
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
8
SMVector SMVector Labs
2 Wire Start/Stop
We want to reset the TB-13A Input Function to have
no effect on the drive.
To do this we need to reset
Parameter P121 – “TB-13A Input Function”
Back to
0 – “Disables Input”
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
9
SMVector SMVector Labs
2 Wire Start/Stop Control
Form A
Programmable Relay
Terminals
Gray
Parameter Settings:
P100 Set to 01 (terminal strip control)
Start/Stop
Contact (S1)
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
10
SMVector SMVector Labs
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
11
SMVector
Binary Counting
Speed 1 = 13A
Speed 2 = 13B - Speed 5 = 13A & 13C
Speed 3 = 13C - Speed 6 = 13B & 13C
Speed 4 = 13A & 13B - Speed 7 = 13A & 13B & 13C
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
12
SMVector
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
13
SMVector SMVector Labs
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
14
SMVector SMVector Labs
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
15
SMVector SMVector Labs
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
16
SMVector SMVector Labs
60
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
17
SMVector SMVector Labs
60
10
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
18
SMVector SMVector Labs
60
10
30
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
19
SMVector SMVector Labs
2 Wire Start/Stop Control
Form A
Programmable Relay
Terminals
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
21
SMVector
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
22
SMVector
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
23
SMVector SMVector Labs
2 Wire Start/Stop
Control w/ Speed Pot
Form A
Programmable Relay
Terminals
Blue
Yellow
Gray
Gray
Parameter Settings:
P100 Set to 01 (terminal strip control)
P101 Set to 01 (0-10 VDC speed reference)
POT
Wire the drive up according to the drawing.
Speed Turn on S1 to Start the motor.
Pot Turn off S1 to Stop the motor.
Turn the Speed Pot to change analog signal
and the speed of the motor
Start/Stop
Contact (S1)
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
24
SMVector SMVector Labs
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
25
SMVector
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
26
SMVector
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
27
SMVector
Parameter Settings:
Brown
Blue
Gray
Gray
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
30
SMVector SMVector Labs
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
31
SMVector SMVector Labs
Jog
Typically used for machine set up
• Push-button
Starts when pushed
Stops when released
• Set to run at low speed
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
32
SMVector
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
33
SMVector
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
34
SMVector
Note
Parameter P134 is used to set the
Jog Forward
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives &speed
Gearmotors | Clutches & Brakes | Machine Automation
37
SMVector SMVector Labs
10
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
38
SMVector SMVector Labs
Green
Black
Black
POT Wire the drive up per the drawing.
Turn on S1 to Start the motor.
Turn off S1 to Stop the motor.
Toggle S3 to change direction
Green
Parameter Settings:
P100 Set to 01 (terminal strip control)
P101 Set to 01 (0-10 VDC speed reference) Jog
P121 Set to 10 (Term 13A FWD / REV selection) PB2 (N.O.)
P122 Set to 15 (Term 13B = JOG FWD)
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
P134
39 Set to 10.0 (10 Hz JOG speed)
SMVector SMVector Labs
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
40
SMVector SMVector Labs
M-O-P
“Motor Operated Pot”
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
41
SMVector
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
42
SMVector SMVector Labs
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
44
SMVector SMVector Labs
Customer Interface
At this point you will See
F.IL
On your display
F.IL
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
45
SMVector
Note
The issue is that we just set the TB-13B Input as a
MOP Up switch. We also need to configure one of
the inputs as a MOP Down switch.
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
46
SMVector SMVector Labs
AC Variable Frequency Drives | Servo Drives & Motors | Electro-Mechanical Drives & Gearmotors | Clutches & Brakes | Machine Automation
47
SMVector 3-Wire Start / Stop Control
w/ MOP Speed Reference
Form A Reset P104 & 105 to 20
Programmable Relay
Terminals Disconnect all
external wiring
Green
Green
Red
Black
Wire the drive up according to
Gray
the drawing.
Use the GREEN PB2 button to
Start the motor.
Start Button Use the RED PB1 button to
Black
Questions?