Professional Documents
Culture Documents
Experiment No: 2
Experiment Name: Resistance Measurement with Color Code and DMM
Resistor: Resistor is an electrical component that reduces the electric current. The fixed resistor
type is the most common resistor.
Theory: We learn the color code table to calculate value without DMM. Our instructor guides us
how to calculate this. We will compare the value with color code and using DMM.
Procedure:
We can find the values of resistor using a DMM but at first, we will find the value of a
resistor by its color code and then we will see it is ok or not.
Observe the color code and all the data given below in the table will help us to find out
the value of resistor without DMM.
After calculating the value without the DMM then we will connect the DMM that the
value we calculate is ok or not.
We connect the wire first to the two pole of resistor then start the stimulation and
calculate the value.
We will get nominal value by +-- of x%.
Set up of all equipment:
Data Table:
Precautions:
First, need a working net connection because we are performing this lab in online.
When we calculate the value using color code must calculate it very carefully otherwise,
we will get wrong value.
Resistor should be connected by wire with DMM.
Calculate value in DMM with resistor mode and after finishing all this thing start the
stimulation.