Professional Documents
Culture Documents
NB: We may decide to eliminate 7.5 mtres depth boring ( i.e. Sr no 2 a ) from
above., if it is not required by us
------------------------------------------------------------------------------------------------------------
---
Our one of structural consultant had asked for the following ( however we may or
may not engage that consultant for structural design work).Please confirm whether
the same is included in the geotech test:-
1) 5 bore holes of 15 m. depth each one bore hole of 20 m. depth. If hard rock is met
with min. 1m inside the rock below the foundation level.
2) Undisturbed and disturbed soil samples each to be collected for every 1.5 m depth
or for every change of strata whichever is met earlier.
3) Carrying out SPT or dynamic cone penetration tests as per IS requirement for
each different type of strata met with at interval of 1.5 m or change of strata
whichever is earlier.
(f) Depth at which water is encountered during bore-hole operations and possible
max. rise in water table.
One soft copy and two hard copies of the Report shall be submitted