Professional Documents
Culture Documents
Page 1 of 2
Previous Screen
Welcome: j570hvp
Product: EXCAVATOR
Model: 345B EXCAVATOR 6MW
Configuration: ISJ HEX COMMONALITY CHART 6MW00001-UP (MACHINE)
i03381213
Illustration 1 g01126970
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 6/9/2017
ISJ HEX COMMONALITY CHART 6MW00001-UP (MACHINE)(SEBP5600 - 00) ... Page 2 of 2
Injector Mechanism
(1) Rocker arm
(2) Adjustment screw
(3) Locknut
1. Put the No. 1 piston at the top center position on the compression stroke. Refer to Systems
Operation/Testing and Adjusting, "Finding Top Center Position for No. 1 Piston".
c. Turn the adjustment screw until the screw makes contact with the electronic unit
injector.
f. Turn the adjustment screw until the screw makes contact with the electronic unit
injector.
2. Rotate the engine in the normal operating direction by 360 degrees. Cylinder 1 will now be
on Top Center exhaust stroke.
a. Cylinder 1, 2, and 4 can be adjusted with cylinder 1 at Top Center exhaust stroke.
c. Turn the adjustment screw until the screw makes contact with the electronic unit
injector.
f. Turn the adjustment screw until the screw makes contact with the electronic unit
injector.
Copyright 1993 - 2017 Caterpillar Inc. Fri Jun 9 15:46:03 UTC+0700 2017
All Rights Reserved. j570hvp
Private Network For SIS Licensees.
https://sis.cat.com/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sis... 6/9/2017