Professional Documents
Culture Documents
APPLICATION TECHNICAL
Surge arrester designed to CHARACTERISTICS
protect 12, 24 and 36 kV • This surge arrester is a metal
class components, including oxide varistor surge arrester in an
transformers, equipment, cable elbow configuration.
and accessories from high voltage • Each arrester is tested for AC
surges resulting from lightning or withstand, partial discharge and
switching. critical voltage prior to leaving the
It has been designed to be used factory.
with the 430TB separable tee
connector.
DESIGN 170 mm
105 mm
Surge arrester comprising:
1. Interface designed to fit 6/10 (12) kV
the 430TB tee connector. Dia.
75 mm
6.35/11 (12) kV
2. Conductive EPDM insert. 8.7/15 (17.5) kV
3. Conductive EPDM jacket. 1 12/20 (24) kV
4. Insulating EPDM layer 5 12.7/22 (24) kV
moulded between the insert 2 18/30 (36) kV
and the jacket. 3 9
19/33 (36) kV
L2
5. Receptacle for contact rod.
L1
6. Metal oxide valve elements. 4
7. Steel cap. 6 Up to 36 kV
8. Earth connection.
9. Earth lead. Dia.
65 mm
7
8
SPECIFICATIONS AND
STANDARDS
The 300SA surge arresters meet
the test requirements of IEC
60099-4.
24
TYPICAL APPLICATION AND DIMENSIONS ORDERING INSTRUCTIONS
To order the surge arrester,
specify the surge arrester type, as
290 mm
described on previous page.
180 mm 107 mm
EXAMPLE:
For a maximum continuous
operating voltage (r.m.s.) of
24 kV and a nominal discharge
current of 10 kA.
Order a 300SA-10-30N surge
arrester.
Type 300SA
surge arrester
Type 430TB
tee connector
TECHNICAL DATA
25