Professional Documents
Culture Documents
Programmable Options
<
5. Press the START keypad. The first manual programming Error with output board. Power Detection Error cycle.
option, “dCYC,” is displayed. down machine and retry. (Design 2 and 3) Error logged
E dL Door Lock Error Door does not lock or unlock. E LF Water Leak Detection Fill valve leak during test or
Exiting the Manual Programming Mode Press any key to repeat the Error (Design 2 and 3) cycle. Error logged.
1. Press the #5 (<) keypad until the control returns to Start lock or unlock sequence. E Sd Slow Drain Error Slow drain. Error logged.
Mode.
If the door is open, verify the Ed01 SPI Communication Control cannot communicate
solenoid is not extended. Error (Design 2 and 3) with motor drive. Power down
Attempt closing the door. and retry.