Professional Documents
Culture Documents
LED compact
Module P211-5
Modules Pxx
Product description
• General lighting
• Design and effect lighting
• Emergency lighting
• Spotlights
• High-flux LED module
• Narrow colour temperature tolerance band
• Compact design
• Excellent thermal management
• Integrated polarity reversal protection
1,75±0,15
max. 1
• High-power LED module in chip-on-board technology (COB)
• Attached with premounted thermally conductive adhesive tape
• Available with or without connection cable ø5,20±0,20
• Connection: Cable 200 mm
• Cooling required
10±0,40
5±0,40
Technical data
Beam characteristic 140° tc/tp
4,50±0,40
Ambient temperature range -25 ... +55 °C 18±0,40
tp rated 75 °C
tc1 75 °C Ordering data
Max. DC forward current 700 mA Article Colour ConnectionPackaging Weight
Type Colour6 Wave length
Max. permissible LF current ripple 1,900 mA number temperature cable carton per pc.
Max. permissible peak current 1,920 mA / max. 10 ms 1 light point per module
Risk group (EN 62471:2008) RG1 P211-5 DL 89601879 Daylight white – 6,500 K yes 100 pc(s). 0.002 kg
Risk group (EN 62471:2008) for P211-5 DL RG2 at d = 200 mm, RG1 P211-5 NW 89601880 Neutral white – 4,200 K yes 100 pc(s). 0.003 kg
at d ≥ 2 m P211-5 WW 89601881 Warm white – 3,000 K yes 100 pc(s). 0.003 kg
Type of protection IP00 P211-5 PM 89601882 Packed meat – – yes 100 pc(s). 0.004 kg
P211-5 GOLD 89601883 Gold – 2,700 K yes 100 pc(s). 0.003 kg
P211-5 DL W/O-C 89601884 Daylight white – 6,500 K no 100 pc(s). 0.001 kg
È P211-5 NW W/O-C 89601885 Neutral white – 4,200 K no 100 pc(s). 0.001 kg
Standards, page 5 P211-5 WW W/O-C 89601886 Warm white – 3,000 K no 100 pc(s). 0.002 kg
P211-5 PM W/O-C 89601887 Packed meat – – no 100 pc(s). 0.001 kg
Colour temperatures and tolerances, page 8 and 9
P211-5 GOLD W/O-C 89601888 Gold – 2,700 K no 100 pc(s). 0.001 kg
ACCES-
SORIES
Lens O211-2
Product description
• Narrow-beam lens for P211-5
• For general, design and effect lighting
• As a spotlight
• High efficiency and quality of light
• Simple installation
• 10° beam angle for colours
• 20° beam angle for white
• Attached with ready-made adhesive tape
• Material: PC / PMMA
• Colour: white / transparent
150° 150°
120° 120°
90° 90°
60° 60°
30° 30°
Ordering data
Type Article number Dimensions L x W x H Packaging carton Weight per pc.
O211-2 spot lens 10° 24139148 25 x 25 x 17.7 mm 10 pc(s). 0.007 kg
ACCES-
SORIES
Lens O211-2 diffusion lens
Product description
• Diffusion lens for P211-5
• In combination with LENS O211-2 spot lens
• No tools required for installing
• Material: PMMA
• Colour: transparent
Asymmetrical beam angle 10° / 40°
• For wallwash applications 1,4
2,0
• As an asymmetrical spotlight
Symmetrical beam angle 40° 25
• As a symmetrical spotlight
19,5
25
150° 150°
120° 120°
Ordering data
Type Article number Dimensions L x W x H Packaging carton Weight per pc.
O211-2 diffusion lens 10 / 40° 24139011 25 x 25 x 1.4 mm 8,000 Stk. 0.001 kg
90° 90°
O211-2 diffusion lens 40° 24166036 25 x 25 x 1.4 mm 10 Stk. 0.001 kg
60° 60°
30° 30°
P211-5, 350 mA LEDmodules from Tridonic are not protected against overvoltages,
ta tc Rth, hs-a overcurrents, overloads or short-circuit currents. Safe and reliable operation
25 °C 75 °C 14.41 K/W can only be guaranteed in conjunction with a LED Driver which complies with
30 °C 75 °C 12.60 K/W the relevant standards. The use of LED Driver from Tridonic in combination with
40 °C 75 °C 9.00 K/W LED module guarantees the necessary protection for safe and reliable operation.
50 °C 75 °C 5.37 K/W The LED modules are only for the operation with SELV < 60 V.
The operation at LED Drivers with outputvoltage > 60 V is with an additional
preparations possible. Further information on request.
P211-5, 700 mA
ta tc Rth, hs-a If a LED Driver other than Tridonic is used, it must provide the following
25 °C 75 °C 13.31 K/W protection:
30 °C 75 °C 11.64 K/W • Short-circuit protection
40 °C 75 °C 8.30 K/W • Overload protection
50 °C 75 °C 4.96 K/W
The actual cooling surface can differ because of the material, the structural
shape, outside influences and the installation situation. A thermal connection
between LED modules and heat sink with heat-conducting paste or heat
Storage and humidity
conducting adhesive film is absolutely necessary.
Additionally the LED has to be fixed on the heat sink with M3 screws with plas-
storage temperature -30 ... +80 °C
tic washer to optimise the thermal connection.
Wiring
Cable: AWG24; length 200 mm
L +
350 mA / 700 mA
N –
200
180
160 P211-5 DL
P211-5 NW
140
P211-5 WW
lm
120 P211-5 PM
P211-5 GOLD
100
80
60
40
300 350 400 450 500 550 600 650 700 750
mA
Data sheet 03/17-LED172-9
Subject to change without notice. www.tridonic.com 6
LED light engine / OLED
LED compact
3,15
3,10
3,05
VF [V]
3,00
2,95
2,90
2,85
300 350 400 450 500 550 600 650 700 750
IF [mA]
Lumen maintance at tp = 65 °C
Operating modeType L90 / F10 L90 / F50 L80 / F10 L80 / F50 L70 / F10 L70 / F50
P211-5 DL 38,000 h 57,000 h 60,000 h 60,000 h 60,000 h 60,000 h
P211-5 NW 38,000 h 57,000 h 60,000 h 60,000 h 60,000 h 60,000 h
HE P211-5 WW 38,000 h 57,000 h 60,000 h 60,000 h 60,000 h 60,000 h
P211-5 GOLD 38,000 h 57,000 h 60,000 h 60,000 h 60,000 h 60,000 h
P211-5 PM – – 20,000 h – 32,000 h –
P211-5 DL 24,000 h 36,000 h 50,000 h 60,000 h 60,000 h 60,000 h
P211-5 NW 24,000 h 36,000 h 50,000 h 60,000 h 60,000 h 60,000 h
HO P211-5 WW 24,000 h 36,000 h 50,000 h 60,000 h 60,000 h 60,000 h
P211-5 GOLD 24,000 h 36,000 h 50,000 h 60,000 h 60,000 h 60,000 h
P211-5 PM – – 30,000 h – 49,000 h –
-10° 0° 10°
-20° 20°
-30° 30°
100
relative intensity Iv/Iv, max
-40° 40°
80 50°
-50°
60 -60° 60°
40 70°
20 80°
0 90°
-100 -80 -60 -40 -20 0 20 40 60 80 100
For further information see Design-in Guide, 3D data and photometric data on
www.tridonic.com or on request.
The specified colour coordinates are measured at a current impuls of 350 mA integral after a settling time of 100 ms.
The ambient temperature of the measurement is ta = 25 °C.
The measurement tolerance of the colour coordinates are ± 0.01.
2,700 K
x0 y0
Centre 0.4696 0.4262
0,4450
0,0035
0,4400
0,0033
0,4350
0,0025
intensity [W/nm]
0,4300
0,0020
0,4250
0,4200 0,0015
0,4150
0,0010
0,4100
0,0005
0,4050
0,4500
0,4550
0,4600
0,4650
0,4700
0,4750
0,4800
0,4850
0,4900
0
380 420 460 500 540 580 620 660 700 740 780
MacAdam ellipse: 4SDCM wave length [nm]
3,000 K
x0 y0
Centre 0.4506 0.4144
0,4300
0,0040
0,4250
0,0035
0,4200
0,0030
intensity [W/nm]
0,4150
0,0025
0,4100
0,0020
0,4050
0,0015
0,4000
0,0010
0,3950
0,0005
0,3900
0
0,4300
0,4350
0,4400
0,4450
0,4500
0,4550
0,4600
0,4650
0,4700
380 420 460 500 540 580 620 660 700 740 780
4,200 K
x0 y0
Centre 0.3809 0.3874
0,4100
0,0040
0,4050
0,0035
0,4000
0,0030
intensity [W/nm]
0,3950
0,0025
0,3900
0,0020
0,3850
0,0015
0,3800
0,0010
0,3750
0,0005
0,3700
0
0,3600
0,3650
0,3700
0,3750
0,3800
0,3850
0,3900
0,3950
0,4000
380 420 460 500 540 580 620 660 700 740 780
MacAdam ellipse: 4SDCM wave length [nm]
6,500 K
x0 y0
Centre 0.3251 0.3459
0,3650 0,009
0,3600 0,008
0,3550 0,007
intensity [W/nm]
0,3500
0,006
0,005
0,3450
0,004
0,3400
0,003
0,3350
0,002
0,3300
0,001
0,3250
0
0,3050
0,3100
0,3150
0,3200
0,3250
0,3300
0,3350
0,3400
0,3450
380 420 460 500 540 580 620 660 700 740 780
wave length [nm]
MacAdam ellipse: 4SDCM
PM
x0 y0
Centre 0.3958 0.3146
0,3350 0,006
0,3300
0,005
0,3250
intensity [W/nm]
0,3200
0,004
0,3150
0,003
0,3100
0,002
0,3050
0,3000 0,001
0,2950
0
0,3850
0,3900
0,3950
0,4000
0,4050
0,4100
0,4150
0,3750
0,3800
380 420 460 500 540 580 620 660 700 740 780
wave length [nm]
MacAdam ellipse: 4SDCM