Professional Documents
Culture Documents
in
NADAR SARASWATHI COLLEGE OF ENGINEERING AND TECHNOLOGY, THENI.
Course/Branch :B.E/EEE / Year / Semester :III/V Format
NAC/TLP-07a.13
No.
Subject Code :EE8501 Subject Name :Power System Analysis Rev. No. 02
Unit No :IV Unit Name :Unsymmetrical Fault Analysis Date 30.09.2020
What happens if the neutral is not grounded in case of the single line to ground fault?
a.Only the zero sequence impedance will be zero
6. b. The zero sequence impedance will be infinite
L1
c. Fault current will be zero
d. Both (b) and (c)
A transmission line has self and mutual impedances of 0.8 pu and 0.2 pu. Find the
positive, negative and zero sequence impedances respectively?
a.0.6, 0.8 and 1.2 pu
12. b.0.6, 0.6 and 1.2 pu L4
c.0.8, 0.8 and 1.2 pu
d.0.8, 0.6 and 1.2 pu
Earth fault relay uses the which of the following sequence currents?
a.positive sequence
b.negative sequence
16. L1
c.zero sequence
d.any of the above
For a single line to ground fault the zero sequence current is given by j0.3p.u. The
current carried by the neutral during the fault is
a.j1.0pu
22. L2
b.j3.0pu
c.j9.0pu
d.j6.0pu
Prepared By: G.Sujitha AP/EEE Page 3 of 4
www.studymaterialz.in
NADAR SARASWATHI COLLEGE OF ENGINEERING AND TECHNOLOGY, THENI.
Course/Branch :B.E/EEE / Year / Semester :III/V Format
NAC/TLP-07a.13
No.
Subject Code :EE8501 Subject Name :Power System Analysis Rev. No. 02
Unit No :IV Unit Name :Unsymmetrical Fault Analysis Date 30.09.2020
The maximum power delivered to the load for short transmission line is at
a) β=α
b) β>α
c) β=δ
24. d) β>δ L2
When a fault occurs in a power system the zero sequence component of current
becomes zero. the type of fault is
a.3 phase to ground fault
b.double line fault
25. c.double line to ground fault L1
d.single line to ground fault