Professional Documents
Culture Documents
SPECIFICATIONS
Gauge length : 25mm & 50 mm
Maximum Extension : 2mm
Resofution : 1 micron
Specimen Diameter : 0.5 to 30 mm
Specimen Thickness : up to 30 mm
Specimen Width : up to 30mm
Software features :-
TECHNICAL SPECIFICATIONS
Window based Software with real time XY
MODEL UTM-10 UTM-20 UTM 40 UTM-60 U T M 10 0 graphic display and software for data
management.
Maximum Capacity KN 100 200 400 600 1000
1 st Measuring Range KN 0-20 0-40 0-80 0-120 0-200 x With advanced
Load Resolution KN 0 .0 0 0 .0 1 0 .0 2 0 .0 3 0 .0 5 features – Real
5 time graph on PC
2 nd Measuring Range KN 0-40 0-80 0-160 0-160 0-400 x Superimpose Graph
Load Resolution KN 0 .0 1 0 .0 2 0 .0 4 0 .0 6 0 .1 System Zooming of Graph
Stress Vs. strain graph
3 rd Measuring Range KN 0- 0-200 0-400 0-600 0-1000
x Stress Vs. Displacement
100 Graph
x Point Tracing On Graph
Load Resolution KN 0 .0 2 0 .0 5 0 .1 0 .1 5 0 .2 5
5
Final Results include following
Resolution of Piston Movement Mm 0 .1 0 .1 0 .1 0 .1 0 .1 output data from PC
(Displacement) Ult./ Break load, Disp. at FMAX, Max.
Extension, Ult Stress, Elongation,
Clearance for tesile at fully Mm 50- 5 0 -7 0 0 50- 5 0 -7 0 0 5 0 -7 0 0
Reduction in area, Youngs Modulus, Yield
descended working piston 700 700
Stress; 0.1 % proof stress, 0.2 % proof
stress, YS/UTS Ratio
Clearance for compression test Mm 0- 0-700 0-700 0-800 0-850
at fully descended working piston 700
Diameter of Rollers 30 30 30 50 50