Professional Documents
Culture Documents
A B C D E F G H I J K L M N O P Q R S
Switch groundA 100R
F
0u
1uF 1M 150K 47uF
10
B VR1
Out C 10K 1.2M 150K
D 470nF 1M
1nF Q2
6.8K
E
IC1 IC2
47pF
In F 470K
150K
G 1.2M 150K
4.7nF
10uF
H
LDR
I
J 6.8nF 100R
4
Depth
91
1N
10K Lin
1N
91
4
Speed
500K Rev log
Notes:
This build will fit in a 1590A with low profile jacks (Smallbear's are the best).
Several changes were made from the original design to reduce parts. I removed the in- and output loading
and the output section has been changed slightly to use only a trim instead of volume pot.
Use tantalum, mini electrolytics, and monolithic ceramics where necessary to conserve space.
The ramp mod is more effective at slower speeds. Note that it is normal for it to speed up the rate slightly.
I *highly* recommend using a vactrol for a richer sound. VTL5C1 was very nice, much better than an NSL-32.
The color of the external LED has a big effect on the sound. Red is brighter; superbright blue is mellower.
The 100R and 47uF electronically isolate the LFO. They might be overkill, but they help prevent possible ticking.
(c) Creative commons. This layout may not be used for commercial purposes.