Professional Documents
Culture Documents
CIRCUIT DESCRIPTION
The D squib circuit consists of the airbag sensor assembly, spiral cable and steering wheel pad.
It causes the SRS to deploy when the SRS deployment conditions are satisfied.
DTC B0103/12 is recorded when a B+ short is detected in the D squib circuit.
DTC No. DTC Detecting Condition Trouble Area
S Short circuit in D squib wire harness (to B+) S Steering wheel pad (D squib)
S D squib malfunction S Spiral cable
B0103/12
S Spiral cable malfunction S Airbag sensor assembly
S Airbag sensor assembly malfunction S Wire harness
WIRING DIAGRAM
See page 05−662.
CIRCUIT INSPECTION
1 CHECK D SQUIB CIRCUIT
H01001
C81045 H40029
NG Go to step 5
OK
OK
3 CHECK D SQUIB
OK
NG Go to step 1
OK
H01004
NG REPAIR OR REPLACE INSTRUMENT PANEL
C81045 H40033 WIRE
OK
(a) For the connector (on the spiral cable side) between the
spiral cable and the airbag sensor assembly, measure the
voltage between D+ and body ground.
D Squib OK:
Airbag
Spiral
Sensor Voltage: Below 1 V
Cable
Assembly
D− D+
H01000
C81045 H40034
OK
NG Go to step 1
OK