You are on page 1of 8

Aspen HYSYS- Basic Course

Case Study IV

www.ChemicalEngineeringGuy.com
The Flowsheet:
The Flowsheet (with data)
Note 1:

 Compositions must be normalized, as they sum less/more than 1.000

www.ChemicalEngineeringGuy.com
Material Streams

www.ChemicalEngineeringGuy.com
Compositions

www.ChemicalEngineeringGuy.com
Analysis

 H2S, NH3, and H2O are polar → will dissolve


 They form vapor-liquid equilibrium (VLE) , not a vapor-liquid-liquid one (VLLE)
 You should only expect liquid in one stream

 Aspen calculates the composition for both streams (typically the same value)
 The Engineer must ensure that there is only one stream
 This stream will have the correct composition calculations
 Verify by yourself!

www.ChemicalEngineeringGuy.com
Questions, Comments?
Contact me!
 Contact@ChemicalEngineeringGuy.com

www.ChemicalEngineeringGuy.com

You might also like