Professional Documents
Culture Documents
LAB REPORT
Submitted To Submitted By
Index
Topic Page No
1. INTRODUCTION 3
2. OBJECTIVES 3
3. METHODOLOGY 3
3.3.2-Data Analysis 5
5. PRECAUTION 5
6. CONCLUSION 6
7. REFERENCESS 6
Page | 2
192-024-111
1. INTRODUCTION
2. OBJECTIVES
3. METHODOLOGY
3.1- Raw materials:
A Pieces of fabric.
Page | 3
192-024-111
5. The pointer is set directly opposite to the datum line, with no material
and counter weight in their proper places, by adjusting the leveling
screw. The counter weight for the particular length which is supplied
with the instrument is chosen and suspended at the notch D. (For full
cotton the large rider is placed in the notch and for ½ cotton small
rider is placed)
6. Now yarn is withdrawn from sample and placed sample hook until the
pointer comes in level with the datum line.
7. At that stage the threads are taken out and counted which givers
directly the cont. of yarn taken for testing.
8. There 30 threads in the sample hook at the balanced condition so the
count of the yarn is 30s
Page | 4
192-024-111
3.3.2-Data Analysis:
01 29 29
02 30 30
03 31 31
30s
04 30 30
05 30 30
06 29 29
5. PRECAUTION
We should yarn withdrawn from fabric very carefully.
Marked fabric very carefully.
Page | 5
192-024-111
6. CONCLUSION
It is the very easy process but if we cannot use template properly according
to thread type and idle weight than the result will be faulty.
7. REFERENCESS
https://diutestudents.blogspot.com/2017/05/determination-of-yarn-
count-from-fabric.html
https://textilelearner.net/how-to-determine-thread-count-of-fabric-by-
beesley-balance/
Page | 6