Professional Documents
Culture Documents
Emergency Stop
Disconnect power cables from ash conditioner motor for safety purpose
Unbolt ash conditioner humidifying cabin from the top of the ash conditioner
casing and take it out
At this time ash conditioner casing is uncovered and easily accessible from the
top
Step inside the ash conditioner casing and clean manually all the interior
components. Special attention should be dedicated to remove sticky and
crusty ash that may appear all along the bottom of the ash conditioner, on
each wall, on the shafts, on paddles and their teeth, on top covers and on the
ash conditioner humidifying cabin
Now ash conditioner cabin is clean. Step outside the ash conditioner cabin
and re-place ash conditioner humidifying cabin on the top of the ash
conditioner cabin
Bolt ash conditioner humidifying cabin on casing
Reconnect power cables to ash conditioner motor
Tur-on power on ash conditioner motor and let ash conditioner run empty for
10-15 and check it
Proceed once again with normal operation
logika kerja
• Mulai motor (45KW) MESCBI600-
• Mulai sistem humidifikasi yang terdiri dari 18 nozel yang memberi mereka air bersih, sistem akan dikelola
oleh katup bola dengan aktuator, dikendalikan oleh katup solenoid tunggal 24 Volt Dc, menggunakan tekanan 4
Bar-
• Hidupkan motor (4 KW) dari katup putar -
• Beri makan katup putar dengan abu
• Pada akhir siklus pencampuran, hentikan motor katup putar -
• Pastikan mixer benar-benar mengeluarkan abu yang dilembabkan
• Mulai sistem pembersihan yang terdiri dari 12 nozel dengan memberi makan mereka dengan air bersih, sistem
akan dikelola oleh katup bola dengan aktuator, dikendalikan oleh katup solenoid tunggal 24 Volt Dc, gunakan
tekanan 4 Bar-, selama pembersihan humidifier nozel dan motor mixer harus tetap berjalan
• Setelah dibersihkan, tutup semua katup dengan aktuator suplai air
Pemberhentian darurat
• Silo Outlet Valve dikonfirmasi ditutup
• Katup putar dihentikan-dikonfirmasi dihentikan oleh sensor rotasi
• Ash Conditioner dihentikan dan dikonfirmasi dihentikan oleh sensor rotasi
• Pengkondisian Katup air tertutup dikonfirmasi
• Katup Air Pencucian tertutup
• Sistem di Reset