Professional Documents
Culture Documents
Brazil Only Rsa Authentication Manager 8.5 Installation Guide
Brazil Only Rsa Authentication Manager 8.5 Installation Guide
Thank you for purchasing RSA® Authentication Manager 8.5, the world’s leading two-factor authentication
solution. This document describes how to install Authentication Manager on the hardware appliance that RSA
has supplied.
Procedure
1. Connect a keyboard and monitor to the appliance.
2. Connect the power cord to the appliance and, if necessary, power on the appliance.
3. When a warning message prompts you to insert the media with the image of Authentication Manager,
insert the DVD that you burned with the ISO file, and press CTRL + ALT + DELETE to reboot the
hardware appliance.
If the appliance does not boot from the DVD, you must access the appliance BIOS and select the option
that allows you to boot from the DVD drive.
4. In the installer boot menu, use the down-arrow key to select Install RSA Authentication Manager,
and press ENTER.
5. After the installation has completed, the DVD is ejected from the appliance. Remove the DVD.
6. When prompted whether you want to shut down the appliance, do one of the following:
Deploy the hardware appliance and perform Quick Setup to configure the appliance as a primary or replica
instance. For instructions, see the RSA Authentication Manager 8.5 Hardware Appliance Getting Started
document or the RSA Authentication Manager 8.5 Setup and Configuration Guide.
Copyright © 1994-2020 Dell Incorporated or its subsidiaries. All Rights Reserved.
July 2020
Trademarks
Dell, RSA, the RSA Logo, EMC and other trademarks are trademarks of Dell, Inc. or its subsidiaries. All other
trademarks may be trademarks of their respective owners. For a list of RSA trademarks, go to
www.emc.com/legal/emc-corporation-trademarks.htm#rsa.