Professional Documents
Culture Documents
TOC Returns you to BOP Replacement Parts Catalog contents page. (This page)
Contents
Returns you to Cameron PDF contents page.
Page Page
2
TOC
Riser
System
Stack
System
SD5211-96 SD11600-96
Cameron has a focused drilling organization which is dedicated to meeting designed and manufactured to provide safety, reliability and convenience to
the changing needs of our customers. One of the ways we accomplish the operator.
this is by providing total systems for land and subsea drilling including BOP Riser Systems
stacks, complete choke manifold systems, riser systems and high technology Cameron riser system components, spider/gimbal, telescoping joint, RST
control systems. ring, fill-up valve, RF and RD riser joints, termination spool and flex joint are
BOP Stack Systems designed to meet the stringent requirements for drilling in deep water.
Cameron ram-type BOPs, annular BOPs and gate valves can meet the Control Systems
most basic land drilling needs as well as critical, weight sensitive, harsh Cameron offers a complete hydraulic control system as well as a multiplex
environmental platform requirements. Components in Cameron’s subsea control system for subsea drilling applications. Cameron supplies all the
BOP stack systems, ram-type BOPs, annular BOPs, gate valves and BOP components required for choke control systems as well as all of the compo-
stack structures incorporate years of field-proven technology and reliability. nents used to control the BOP stack and associated equipment. For land
Choke Manifold Systems applications, Cameron’s pump accumulator unit and remote control panels
Cameron supplies all necessary components for a choke manifold including are designed to customer specifications. All of our components offer field-
manual and hydraulic chokes, and H2 chokes, J-2 transmitters, pressure proven reliability and high quality, dependable components.
gauges, check valves, buffer tanks and all connecting equipment required For more information on complete Cameron drilling systems, contact your
to assemble the choke manifold. All Cameron choke manifold equipment is local Cameron representative or visit our web site (http//camerondiv.com).
TOC
Cameron
BOP Replacement Parts Catalog
Cameron provides all of the OEM products and services necessary to maintain the full range of Cameron drilling products. This catalog contains
information on our worldwide network of aftermarket facilities as well as detailed information on the replacement parts necessary for the following
Cameron products:
The Cameron BOP Replacement Parts Catalog, along with the 1996-1997 Cameron General Catalog, is also available on CD ROM. The electronic
version of the catalog provides easy-to-use, interactive information on all Cameron products. The CD ROM is compatible with MacIntosh and
Windows 3.1 and Windows 95 systems. To obtain a copy the CD ROM, contact your Cameron representative or follow the “How to Order”
instructions below.
For additional information on Cameron products, be sure to visit our web site (http://www.cameron div.com).
1
TOC
In any area of the world where Cameron drilling products are used, Cameron TVM is not just a repair program, It is a comprehensive package of services
aftermarket and repair facilities are ready to respond with the most to the drilling contractor. Through TVM, Cameron customers have a way to
comprehensive network of aftermarket products and services available in the drive down drilling costs and be more competitive. In addition, TVM provides
industry. Each of our facilities is strategically located to meet the exact needs of the customer with a single point of contact for equipment sales, repair and re-
the customers in the area. Yet all of the facilities benefit from our expertise and manufacturing and exchange.
worldwide communications network which links all facilities through an
electronic communication system and ensures instantaneous access to Spare Parts Inventory
information. Cameron aftermarket services include: total vendor management Cameron is committed to providing off-the-shelf delivery of spare parts in
(TVM), spare parts inventory, repair refurbishment (RGR), BOP exchange any location worldwide. By using genuine Cameron replacement parts,
program, field service customers are guaranteed to receive the same quality and performance as when
the product was new. To meet these needs, Cameron has established four
Total Vendor Management worldwide stocking locations to better meet delivery requirements. Elastomers
The TVM concept reflects a new relationship between equipment suppliers and frequently requested metal components are stocked in a temperature-
and drilling contractors by making cost efficiency of primary importance to both controlled warehouse in Katy, Texas; Aberdeen, Scotland; Singapore
sides. The traditional seller-buyer adversarial roles are eliminated, in effect and Abu Dhabi.
making the customer and supplier partners in cutting costs.
Cameron understands this process and has more experience in successful RGR
TVM programs than anyone else in the industry. With the development of this Cameron’s focus on aftermarket services includes a complete RGR program.
type of long-term agreement, Cameron and the customer work together to Cameron will repair equipment to customer specifications - fit for purpose, with
reduce the costs associated with the design, manufacture, delivery, installation a reasonable price and quick delivery. Cameron’s RGR goal is to receive the
and operation of equipment required for the drilling project. TVM contract equipment and do whatever is necessary to get it back in the field as quickly as
options may include: possible. In addition, Cameron has embarked on a detailed engineering study
• New equipment manufacture. to take as much time and money out of our RGR processes as possible while
• Field maintenance. still maintaining the quality customers expect from Cameron drilling products.
• Off-the-shelf delivery of spare and replacement parts. Cameron’s RGR program also includes the option of retrofitting BOPs with
• Repair and refurbishment of used and worn equipment. some of the features of more current BOP designs such as bonnet seal carriers,
large bore shear ram bonnets and tandem boosters.
• Used equipment exchange program
• Re-manufactured products BOP Exchange Program
• Inventory management and storage of customer property.
For those customers looking for an economical alternative to buying new
equipment or in situations where a BOP cannot be removed from service for the
time required to make the repair, Cameron offers a BOP exchange program.
For this program, Cameron maintains an inventory of remanufactured BOPs
that met API 6A, 14th edition NACE MR-01-75 restored to like-new condition
with a full one-year warranty. Customers can trade their used BOPs in
exchange for a remanufactured BOP. Cameron also offers remanufactured
BOPs for sale without an exchange.
3
TOC
Veracruz, Mexico
Dedicated aftermarket facility with
manufacturing support. Services include: Assembly, Hydro Testing, Welding,
Post Weld Heat Treat, Inhouse Heat Treat, Machining, Inspection, Blast and Paint,
Customer Property Storage.
Zárate, Argentina
Dedicated manufacturing facility with aftermarket support. Services include:
Assembly, Hydro Testing, Gas Testing, Welding, Post Weld Heat Treat,
Inhouse Heat Treat, Machining, Inspection, Blast and Paint, Customer Property Storage.
4
TOC
Aberdeen, Scotland
Dedicated aftermarket facility with manufacturing support. Services include:
Assembly, Marine Stack and Tree Assembly, Hydro Testing, Gas Testing, Welding, Cladding,
Post Weld Heat Treat, Machining, Inspection, Blast and Paint, Customer Property Storage.
Stavanger, Norway
Dedicated aftermarket facility with
manufacturing support. Services include:Assembly, Marine Stack and Tree Assembly,
Hydro Testing, Gas Testing, Welding, Cladding, Post Weld Heat Treat, Machining,
Inspection, Blast and Paint, Customer Property Storage.
5
TOC
From its Katy facility west of Houston, Texas, Cameron Elastomer CET's facilities provide "life prediction" and immersion testing. The life-
Technology provides engineered solutions to elastomeric material problems. prediction testing is based on the Arrhenius principle of thermochemical
State-of-the-art research, including associated mechanical design and reactions. Elevated temperatures are used to accelerate the thermochemical
engineering, is conducted at this totally integrated manufacturing facility. degradation of elastomer materials.
The 72,000-sq-ft plant is designed to support Cameron Division's elastomer Cameron employees are experts in elastomer technology and can take an
components and develop new products to meet the most stringent operating idea from the testing phase through full product development.
and environmental conditions. Today, there is a family of elastomer products specially formulated and
Cameron Elastomer Technology (CET) has extensive process development designed to meet the rigorous demands of the oilfield. These products, when
capability supported by continuing research, a comprehensive testing laboratory used in Cameron T, U II, and U ram and D annular BOPs, improve performance,
and engineering capability. These are combined to provide effective support for extend service life, reduce downtime, and lower operating costs.
the manufacturing of an extensive line of high-performance elastomer products. CAMRAM™, CAMRAM 350™, CAMULAR™ and CAMLAST™ elastomers
CET offers molded products utilizing compression, transfer and injection have set new standards in performance. Each is uniquely Cameron, including
molding techniques. Critical molded products are qualification-tested prior to design and manufacturing. Behind each product is the absolute commitment to
release for production. quality, performance and support that the industry has come to recognize as
Cold chambers and ovens are available for testing elastomers in temperature hallmarks of Cameron.
extremes ranging from -150°F to 700°F. Precise temperature control allows for An integral part of CET’s Katy facility is a temperature controlled elastomer
exposure of elastomer components to conditions that simulate the actual service warehouse. CET manufactured elastomer products and critical drilling metal
environment. spares are readily available to meet customer requirements.
SD-10810-96 SD-10861-96
Special equipment performs high temperature evaluation of ram packers. The CET facility produces a wide variety of elastomers components.
SD-10813-96 SD-24101-96
A ram-type packer is removed from an injection molding press. Cameron Elastomer Technology plant, Katy, Texas
6
TOC
CAMRAM Products
CAMRAM packers and top seals are designed specifically for Cameron ram • Diesel Mud Resistant
BOPs. These new elastomer products from Cameron Elastomer Technology last CAMRAM packers provide high resistance to diesel drilling muds. In field
longer and provide increased margins of safety in severe drilling environments service, CAMRAM packers have performed as well in high-temperature mud
than do look-alike replacement parts. That’s under all conditions — high conditions as conventional packers perform dry at room temperature.
temperatures, diesel mud and heavy stripping. CAMRAM long-life packers
mean fewer problems, less downtime and better overall performance. • Superior Stripping/Snubbing Performance
The superior elastomer material, in combination with the lipped-plate
design, reduce seal extrusion and wear in stripping and snubbing service.
CAMRAM Characteristics
In fact, CAMRAM packers have demonstrated a stripping capability at least
three times greater than conventional packers.
• Higher Temperature Capability
CAMRAM packers made with high-temperature nitrile rubber provide a 50°F • Extreme High Temperature Capability
increase in the service temperature of the BOP in which they are used. For applications which require higher temperature capabilities than standard
CAMRAM packers have proven successful in 250°F sustained service and CAMRAM packers, Cameron Elastomer Technology has developed
have withstood excursions to 300°F. CAMRAM 350 packers and top seals which are made of CAMLAST.
CAMRAM 350 packers and top seals operate up to 350°F. They can be
300% 300%
270 CAMRAM Packer Rubber CAMRAM Packer Rubber
Conventional Packer Rubber 250 Conventional Packer Rubber
200 200
Retained Properties
170
130
110
100 100 100 100 100 100 100 100
100% 100%
0% 0%
70°F 300°F Elongation Tear Abrasion Tensile Elongation Rubber
Tensile Strength Strength Resistance Strength Hardness
Mechanical Properties
Original Mechanical Properties 70 Hours in 300°F Diesel Fluid
7
TOC
CAMRAM 47,928
Brand A* 11,980
Brand B* 15,638
Brand C* 2,366
Brand D* 14,168
Brand E* 1,687
0 10 20 30 40 50
8
TOC
CAMRAM 350 packers and top seals are made with CAMLAST™ high • CAMRAM 350 packers and top seals have been in field use since 1985
performance elastomer available exclusively from Cameron Elastomer when they were first used in Puckett, Mississippi to control a gas well
Technology. In addition, CAMRAM 350 packers have a patented lipped top and blowout. SInce then, CAMRAM 350 components have continued to prove
bottom plate design for increased service life. In addition, anti-extrusion wings reliable and rugged in field service applications.
have been added to the end of the packer plates to reduce elastomer extrusion at
elevated temperatures. Benefits of CAMRAM 350 include: The CAMRAM 350 logo molded into all CAMLAST packers and top seals
• CAMRAM 350 packers and top seals operate up to 350° F. Standard ensures a genuine quality part from Cameron Elastomer Technology.
CAMRAM packers operate at temperature up to 250° F which is at least
50° F higher than non-OEM packers and top seals.
• CAMRAM 350 packers and top seals can operate in H2S (hydrogen
sulfide) concentrations up to 20% without detrimental effects to
CAMLAST elastomer performance.
• CAMRAM 350 is available for all Cameron ram-type BOPs in which
standard CAMRAM is available. It is not an "off-the-shelf" item, but is
readily available on short notice special orders from Cameron Elastomer
Technology.
• CAMRAM 350 packers and top seals are more expensive than standard
CAMRAM packers and top seals. However, this is a small price to pay
for the level of performance offered by CAMRAM 350 components in
critical applications. CAMRAM 350 Packer
CAMRAM 350 Packers and Top Seals Shut-In Well after 43 Days of Exposure to H2S
In actual field test conditions, the CAMRAM 350 16-3/4” x 5-1/2” 5000 psi
pipe ram packers and top seals pictured at right, were successfully used to
shut-in a gas well after exposure to natural gas containing 35% H2S at
temperatures of 190° for 43 days. The components show negligible damage
after exposure to the severe conditions experienced in controlling the blowout.
CAMRAM 350 packers and top seals are made with CAMLAST™ elastomer
and are intended for use to 350°F in high H2S concentrations and with water
and/or diesel based drilling mud. CAMLAST elastomer is a proprietary
material made only by Cameron Elastomer Technology in Katy, Texas.
CAMRAM 350 packers and top seals are available on a special order basis
only.
For applicable part numbers and availability, please contact your local
CAMRAM 350 16 3/4” top seal after exposure
Cameron representative or the Cameron Elastomer warehouse at
(281) 391-4644.
9
TOC
Cameron Elastomer Technology's elastomer experts have integrated a Because rubber performs best when it is under compression, Cameron's
superior elastomer compound into an exclusive lipped-plate packer design that lipped-plate design provides "rubber in compression" at the wearing surface to
produces "rubber in compression" at the sealing surface. The design is a enhance the elastomer mechanical properties as well as the seal. The lipped
Cameron exclusive and gives the packers improved sealing capabilities and plate is unique because it provides stiffness in the wear direction, yet allows
extended service life. ample feed to the compressed rubber.
Upper Plate
t
Upper Plate
s
Wearing Surface Lower Plate
SD-7395
Rubber in Compression
Cameron offers the most comprehensive line of rams in the industry for its BOPs Cameron Elastomer Technology (CET) including high performance products such as
including pipe rams, shearing blind rams, and variable bore rams. A selection of CAMRAM™ and CAMRAM 350™ elastomers for high temperature applications.
dual string rams are also available to fit specific preventers. These elastomer products are available to fit Cameron BOPs and are standard in
Cameron also offers high quality elastomer products for its rams through some models and sizes.
Variable Bore Rams Available In Some BOP Sizes Yes Yes Yes Yes
FLEXPACKER Rams Available In Some BOP Sizes No In Some BOP Sizes In Some BOP Sizes In Some BOP Sizes
Shearing Blind Rams Available In Some BOP Sizes Yes Yes Yes Yes
DVS Shear Rams Available In Some BOP Sizes No In Some BOP Sizes In Some BOP Sizes In Some BOP Sizes
Grip and Seal Rams Available No No In Some BOP Sizes In Some BOP Sizes No
CAMRAM Top Seals Standard Yes Yes Yes (through 18-3/4”) Yes (through 18-3/4”) Yes (through 18-3/4”)
CAMRAM Packers Standard Yes Yes In Some BOP Sizes In Some BOP Sizes In Some BOP Sizes
CAMRAM 350 Packers and Top Seals Available Yes Yes Yes Yes Yes
10
TOC
Cameron offers a wide range of ram-type BOPs to meet the dynamic Regardless of the model, all of the pressure containing components in
needs of the drilling industry. The Cameron U BOP was initially designed Cameron ram-type BOPS are forged to provide added safety and reliability.
for underwater drilling. Today, there are more U BOPs in the field These ram-type BOPs are just part of the complete line of Cameron
worldwide than any other ram-type BOP in the industry. As technology and drilling system products which include annular and workover preventers,
the needs of the drilling industry changed, Cameron responded by gate valves, controls, subsea riser systems and land and subsea control
developing new ram-type BOP designs. Cameron introduced the U II BOP systems.
for subsea applications and has since developed the T BOP and the In addition, Cameron offers a complete range of drilling replacement
lightweight TL and UL models for land and subsea applications. parts through our worldwide network of aftermarket facilities.
11
TOC
U BOP
The Cameron U BOP is the most widely used ram-type BOP for land, platform • Bonnet seal carrier is available to eliminate the need for high makeup
and subsea applications worldwide and offers the widest range of sizes of any torque on bonnet studs and nuts.
Cameron ram-type BOP. • Hydraulically operated locking mechanisms, wedgelocks, lock the ram
Like all other Cameron preventers, the rams in the U BOP are pressure- hydraulically and hold the rams mechanically closed even when actuating
energized. Wellbore pressure acts on the rams to increase the sealing force and pressure is released. The operating system can be interlocked using
maintain the seal in case of hydraulic pressure loss. Seal integrity is actually sequence caps to ensure that the wedgelock is retracted before pressure is
improved by increased well bore pressure. applied to open the BOP.
Other features of the U BOP include: • For subsea applications, a pressure balance chamber is used with the
• Hydraulic stud tensioning available on larger sizes to ensure that stud wedgelocks to eliminate the possibility of the wedgelock becoming unlocked
loading is consistently accurate and even. due to hydrostatic pressure.
Other features include hydraulically opening bonnets, forged body and a
wide selection of rams to meet all applications. See pages 21 through 26
for rams available to fit the U BOP.
SD-3772
Wedgelock Assembly
SD-5308
U Blowout Preventer
12
TOC
The U blowout preventer is designed so that hydraulic pressure opens and Ram opening pressure opens the rams. Following ram change-out, this
closes the rams and provides the means for quick ram change-out. pressure closes the bonnets. The rams are pulled outward, near the bonnets
Ram closing pressure closes the rams. When the bonnet bolts are removed, before the bonnets begin moving toward the preventer body. This assures that
closing pressure opens the bonnet. After the bonnet has moved to the fully the rams never obstruct the bore or interfere with the pipe in the hole. Hydraulic
extended position, the ram is clear of the body. An eyebolt can be installed in the pressure draws the bonnets tightly against the preventer body and the bonnet
top of each ram to lift it out of the preventer. bolts are reinstalled to hold the bonnets closed.
SD-84-05
U BOP Operating Data and Fluid Requirements Large Bore Shear Bonnet Operating Data and Fluid Requirements
Bore Size and Gals to Open Gals to Close Locking Closing Opening Bore Size and Gals to Open Gals to Close Locking Closing Opening
Working Pipe Rams Pipe Rams Screw Turns Ratio Ratio Working Pipe Rams Pipe Rams Screw Turns Ratio Ratio
Pressure (1 Set) (1 Set) (Each End) Pressure (1 Set) (1 Set) (Each End)
7-1/16" All WP 1.3 1.3 18 6.9:1 2.2:1 7-1/16" All WP __ __ __ __ __
11" Except 15,000 psi 3.4 3.5 27 7.3:1 2.5:1 11" Except 15,000 psi 6.8 7.9 27 12.0:1 4.8:1
11" 15,000 psi 5.7 5.8 32 9.8:1 2.2:1 11" 15,000 psi 8.9 9.0 32 15.2:1 3.7:1
13-5/8" Except 15,000 psi 5.5 5.8 32 7.0:1 2.3:1 13-5/8" Except 15,000 psi 10.5 10.9 32 10.8:1 4.5:1
13-5/8" 15,000 psi Model B 10.4 10.6 45 10.6:1 3.6:1 13-5/8" 15,000 psi Model B 16.0 16.2 45 16.2:1 6.0:1
16-3/4" 3000 psi Model B 9.8 10.6 38 6.8:1 2.3:1 16-3/4" 3000 psi Model B 18.4 19.0 38 10.4:1 4.4:1
16-3/4" 5000 psi Model B 9.8 10.6 38 6.8:1 2.3:1 16-3/4" 5000 psi Model B 18.2 19.0 38 10.4:1 4.4:1
16-3.4" 10,000 psi 11.6 12.5 45 6.8:1 2.3:1 16-3.4" 10,000 psi 18.2 19.1 45 10.4:1 4.4:1
18-3/4" 10,000 psi 21.3 23.1 54 7.4:1 3.7:1 18-3/4" 10,000 psi __ __ __ __ __
20-3/4" 3000 psi 8.1 8.7 46 7.0:1 1.3:1 20-3/4" 3000 psi 14.3 14.9 46 10.8:1 1.7:1
21-1/4" 2000 psi 9.0 8.7 46 7.0:1 1.3:1 21-1/4" 2000 psi 14.3 14.9 46 10.8:1 1.7:1
21-1/4" 5000 psi 27.3 30.0 54 7.2:1 4.0:1 21-1/4" 5000 psi __ __ __ __ __
21-1/4" 10,000 psi 24.5 26.9 51 7.2:1 4.0:1 21-1/4" 10,000 psi __ __ __ __ __
26-3/4" 3000 psi 10.1 10.8 58 7.0:1 1.0:1 26-3/4" 3000 psi __ __ __ __ __
13
TOC
The following specifications apply to typical Cameron U type BOPs. Your The capital letters in the following designations refer to the three U BOP
Cameron representative can provide information on non-standard BOP dimensional views and dimensions charts shown on the following page.
assemblies. A-1 Length - bonnets closed, locking screws locked
• Side outlets to 4-1/16" (7-1/16" on 26-3/4" BOPs) can be provided beneath A-2 Length - bonnets opened, locking screws unlocked
each set of rams on either or both sides of U BOPs. Side outlets can be A-3 Length - bonnets closed, with wedgelocks
studded, open-face flange or clamp hub with the same pressure rating as the A-4 Length - bonnets opened, with wedgelocks
vertical run connections. B-1 Height - flanged
• Flanges conform to API standard 6A and/or 16A. Hubs conform to API 16A B-2 Height - clamp hubs
or applicable standards. Type 6BX flanges are standard for 10,000 and B Height - added height if 30" spacing is required for double
15,000 psi working pressures and for 5000 psi for 13-5/8" and larger bore C Width - no side outlets
BOPs. D Centerline of preventer to outlet flange or hub face. This distance is
• Hydraulic control connections for operation of rams and bonnets are 1" NPT. variable and must be determined per individual specifications.
There are two connections for each set of rams. Wedgelock connections are E-1 Centerline of side outlet (outlet below rams in double) to bottom flange
1/2" NPT. face
E-2 Centerline of side outlet (outlet below rams in double) to bottom hub
• The dimensions chart shown on the following page does not include spacers
face
between rams for double ram models. U BOPs with spacers to clear tool
F-1 Top of upper ram to top flange face
joints can be obtained on special order.
F-2 Top of upper ram to top hub face
G Height of ram
H-1 Centerline of side outlet between rams to bottom flange face
H-2 Centerline of side outlet between rams to bottom hub face
J Top of lower ram to bottom of upper ram
* One required.
**Two required for single preventer, four for double preventer.
*** Commercially available sockets are recommended.
14
TOC
▲
U BOP Dimensions
A
▲
▲
▲ C
▲ ▲ D
F ▲ ▲
▲
SD-84-201
G Top View - Single or Double U BOP
▲
▲
J B A
▲
▲
G
▲ ▲
H F
▲
▲
▲
E
▲▲ SD-84-201 ▲ G B
▲ ▲
E
Side View - Double U BOP ▲ SD-9928
▲
Side View - Single U BOP
15
TOC
19 40
22 18
17 35
15 16
24
5
10
36 38
34 37
12
SD-5287
42
4
26
1
41 4
20
25 21
2 23
31 30
11 32
6
33 9 29 U BOP Exploded View
27
3 28
13 8
7 14
16
TOC
19 40
22 18
17 35
15 16
24
5
10
36 38
34 37
12
SD-5287
42
4
26
1
41 4
20
25 21
2 23
31 30
11 32
6
33 9 29 U BOP Exploded View
27
3 28
13 8
7 14
17
TOC
19 40
22 18
17 35
15 16
24
5
10
36 38
34 37
12
SD-5287
42
4
26
1
41 4
20
25 21
2 23
31 30
11 32
6
33 9 29 U BOP Exploded View
27
3 28
13 8
7 14
18
TOC
SD-10816
12A**
2A
24A
26A
5A
42A
Large Bore Shear Bonnet Assembly
(See pages 16, 17 and 18 for items not called out on this drawing.)
3A
5
6
1
Tandem Booster Exploded View
8
4
3
14
12
*The 7-1/16" tandem booster is a part of the standard land and platform shear configuration for 7-1/16" U BOPs.
19
TOC
20
TOC
Assembly Ram Packer Assembly Ram Packer Assembly Ram Packer Assembly Ram Packer
Blind 644504-01 644500-01 644215-01-00-01 644219-01 44118-01 644218-01-00-01 644222-01 44121-01 644221-01 644225-01 44147-01 644224-01-00-01
1.050" 644504-02 644501-01 644215-02 __ __ __ __ __ __ __ __ __
1.315" 644504-03 644501-02 644215-03 44233-25 44118-07 19243-08 __ __ __ 644225-02 44148-06 644224-02
1.660" 644504-04 644501-03 644215-04 44233-02 44118-02 19243-06 644222-02 44121-02 644221-02 644225-03 44148-05 644224-03
1.900" 644504-05 644501-04 644215-05-00-01 44233-03 44118-03 19243-05 644222-03 44121-03 644221-03 644225-04 44148-07 644224-04
2.062" 644504-06 644501-05 644215-06 44233-04 44118-04 19243-04 644222-04 44121-04 644221-04 644225-05 44148-03 644224-05
2.375" 644504-07 644501-06 644215-07-00-01 644219-06 44118-05 644218-06-00-01 644222-05 44121-05 2010454-05* 644225-06 44148-01 644224-06-00-01
2.875" 644504-08 644501-07 644215-08-00-01 644219-07 44118-06 644218-07-00-01 644222-06 44121-06 2010454-06* 644225-07 44148-02 644224-07-00-01
3.500" 644504-09 644502-01 644215-09-00-01 644219-08 644835-01 644218-08-00-01 644222-07 644753-01 2010454-07* 644225-08 644738-01 644224-08-00-01
4.000" 644216-11 644503-02 644215-11-00-01 644219-10 44119-02 644218-10 44234-10 44122-04 690808-09 644225-10 44149-02 644224-10-00-01
4.500" 644216-12 644503-03 644215-12-00-01 644219-11 644835-02 644218-11-00-01 644222-09 644753-02 2010454-09* 644225-11 644738-02 644224-11-00-01
4.750" __ __ __ 44233-12 44119-04 19374-04 __ __ __ 644225-13 44150-01 644224-13
5.000" 644216-14 644503-05 644215-14-00-01 644219-14 644835-03 644218-14-00-01 644222-10 644753-03 2010454-10* 644225-14 644738-03 644224-14-00-01
5.500" 644216-15 644503-06 19474-06 644219-16 44120-01 644218-16 44234-13 44123-01 690808-12 644225-16 44150-03 644224-16-00-01
5.750' __ __ __ 44233-23 44120-10 644218-17 __ __ __ __ __ __
6.000" __ __ __ 44233-16 44120-02 19375-02 44234-14 44123-02 690808-13 44244-13 44150-04 31215-09
6.625" __ __ __ 44233-17 644835-04 19375-03 44234-15 44123-03 690808-14 644225-18 644738-04-00-02 644224-18-00-01
7.000" __ __ __ 44233-18 44120-04 19375-04 44234-16 44124-01 2010454-14 644225-19 44151-01 644224-19-00-01
7.625" __ __ __ 44233-19 44120-05 644210-21-00-01 44234-17 44124-02 690808-16 44244-15 44151-02 644224-20
7.750" __ __ __ 44233-22 44120-09 19375-11 __ __ __ 44244-25 44151-06 19506-09
8.625" __ __ __ 44233-20 44120-06 19375-06 __ __ __ 44244-16 44151-03 644224-22
9.000" __ __ __ __ __ __ __ __ __ 44244-24 44151-04 19506-06
9.625" __ __ __ __ __ __ __ __ __ 644225-24 44151-05 644224-24-00-01
10.750" __ __ __ __ __ __ __ __ __ 44244-18 44152-01 038372-00-00-01
11.750" __ __ __ __ __ __ __ __ __ 44244-26 614208-01 614227-01
3.500" Aluminum 644216-10 644503-01 19474-07 44233-08 44119-06 19374-06 __ __ __ 44244-20 44149-04 31215-16
4.500" Aluminum 644216-13 644503-04 19474-08 44233-11 44119-07 19374-07 __ __ __ 44244-10 44149-05 31215-17
5.000" Aluminum __ __ __ 44233-24 44119-08 19374-09 __ __ __ 44244-32 44150-08 31215-27
*After depletion.
21
TOC
22
TOC
6 6
6
8 5 1
7
5 7
12 15
10 1 2
13 2
SD-9348
4 3
3 4
4
1
14
11 5 SD-10827
9
SD-10815
DS Shearing Blind Ram 3
11" 5000 and 10,000 psi 49392-01-00-02 49009-01-00-02 2010462-04 46751-04 46752-04 644217-01-00-01 049392-02-00-02 049010-01-00-02 46751-04 46752-04
11" 15,000 psi 614297-01 614275-01 2010462-04 2010460-07 2010461-07 2010453-01 614297-02 614274-01 2010460-07 2010460-07
13-5/8" 5000 and 10,000 psi 46748-01 46749-01 644435-01-00-01 046751-01-00-01 046752-01-00-01 644223-01-00-01 46748-02 46750-01 046751-01-00-01 046751-01-00-01
13-5/8" 15,000 psi 614004-01 614002-01 644435-01-00-01 46751-05 46752-05 644226-01 614004-02 614003-01 46751-05 46752-05
16-3/4" 5000 psi 46766-01 49006-01 46910-03 46751-03-00-01 46752-03-00-01 644229-01-00-01 46766-02 49007-01 46751-03-00-01 46751-03-00-01
16-3/4" 10,000 psi 46773-01 46774-01 46910-03 46751-03-00-01 46752-03-00-01 644229-01-00-01 46773-02 46775-01 046751-03-00-01 46751-03-00-01
18-3/4" 10,000 psi 46776-01 46777-01 46910-02 46751-02 46752-02 644232-02 46776-02 46778-01 46751-02 46752-02
20-3/4" 3000 psi 46783-01 46784-01 __ 615235-01-00-01 __ 19514-00-00-01 46783-02 46785-01 615247-01-00-01 615247-02-00-01
21-1/4" 2000 psi 46783-01 46784-01 __ 615235-01-00-01 __ 19514-00-00-01 46783-02 46785-01 615247-01-00-01 615247-02-00-01
21-1/4" 5000 psi 49983-01 49981-01 46910-05 46751-06 46752-06 645478-01 49983-02 49982-01 46751-06 46752-06
21-1/4" 7500 and 10,000 psi 46788-01 49012-01 46910-05 46751-06 46752-06 645478-01 46788-02 49011-01 46751-06 46752-06
23
TOC
Blade Seal
Upper Shear Ram
Side Packer Blade Packer
Lower Shear Ram Side Packer
Dual String Interlocking (DSI) Shear Rams Double V Shear (DVS) Shear Rams
rams are closed so the steel provides support for the rubber which seals against
the pipe.
U BOP Variable Bore Ram
24
TOC
SD-10315
FLEXPACKER
SD-7786
CAMRAM 350
Packer
25
TOC
18 19
24
26
42
34
SD-5287
26
TOC
Hydraulic Bonnet Bolt System Bonnet Bolt and Tensioner Part Numbers
BOP Size and Bonnet Compact
The hydraulic bonnet bolt tensioner eliminates frictional and torsional loads Working pressure (psi) Bolt Tensioner Unit
and reduces the time required for making up and breaking out bonnet bolts. 11" 15,000 All 49795-13-10 614644-13-10*
• The hydraulic bonnet bolt is completely interchangeable with conventional 13-5/8" 5000 Pipe Ram 49795-13-05 614644-13-05*
bonnet bolts. It has a standard hexagonal head. An additional external 13-5/8" 5000 Shear Ram 49917-13-05 614644-13-05*
thread mates with the internal threads in the operating head of the hydraulic 13-5/8" 10,000 Pipe Ram 49795-13-10 614644-13-10
bonnet bolt tensioner. The hydraulic bonnet bolt has its operating rod 13-5/8" 10,000 Shear Ram 49917-13-10 614644-13-10*
permanently secured in the machined hole in the center of the bolt. 13-5/8" 15,000 All 49795-13-15 614644-13-15**
16-3/4" 5000 Pipe Ram 49795-16-05 614644-16-05*
• The hydraulic bonnet bolt tensioner consists of a compact tensioner unit
16-3/4" 5000 Shear Ram 49917-16-05 614644-16-05
with a remote pump.
16-3/4" 10,000 All 49795-16-10 614644-16-10**
18-3/4" 10,000 All 49795-18-10 614644-18-10**
21-1/4" 5000 All 49795-21-05 614644-18-10**
*Use 25,000 psi WP pump, part number 645035-01.
**Use 30,000 psi WP pump, part number 645035-02.
27
TOC
U II BOP
The Cameron U II BOP takes all of the features of the U BOP and adapts them pressure is released. The operating system can be interlocked using
for subsea use in the 18-3/4” 10,000 and 15,000 psi WP sizes. sequence caps to ensure that the wedgelock is retracted before pressure
Like all other Cameron preventers, the rams in the U II BOP are pressure- is applied to open the BOP.
energized. Wellbore pressure acts on the rams to increase the sealing force and • A pressure balance chamber is used with the wedgelocks to eliminate the
maintain the seal in case of hydraulic pressure loss. Seal integrity is actually possibility of the wedgelock becoming unlocked due to hydrostatic
improved by increased well bore pressure. Other features of the U II BOP pressure.
include: Other features include hydraulically opening bonnets, forged body and a
• Internally ported hydraulic stud tensioning system ensures that stud loading wide selection of rams to meet all applications. See pages 31 and 32 for
is consistently accurate and even. rams available to fit the U II BOP.
• Bonnet seal carrier is available to eliminate the need for high makeup torque
on bonnet studs and nuts.
• Hydraulically operated locking mechanisms, wedgelocks, lock the ram
hydraulically and hold the rams mechanically closed even when actuating
SD-10829
28
TOC
U II BOP Dimensions
The following designations refer to the dimensional drawing:
s
s
A-1 Length -- bonnets closed, with wedgelocks D
A-2 Length -- bonnets opened, with wedgelocks s
B-1 Height -- flanged C
B-2 Height -- Clamp hubs
B-3 Height -- studded x flanged
s
s
E-2 Centerline of side outlet (outlet below rams in double) to bottom
s
hub face s s
F-1 Top of upper ram to top flange face F
F-2 Top of upper ram to top hub face
s
G Height of ram G
H-1 Centerline of side outlet between rams to bottom flange face s s
H-2 Centerline of side outlet between rams to bottom hub face J B
s
J Top of lower ram to bottom of upper ram G H
s
s
E
s s s
SD-5139
29
TOC
46
6
43
42
41
43
42
41
11 38
29
4
49
37
36
35
30 7
31 34 48
5
45
44 33
3a
3b
32
40
19
54
42
39 41
10
9
8
28
51
27
25
24
26
SD-7866
22
23
18 1
2 17 21
15 16
19
20 U II Exploded View
13 14
12
52
53
30
TOC
Ram Body
One set of Cameron variable bore rams seals on several sizes of pipe or
hexagonal kelly. Variable bore rams are available in the size ranges listed in the
chart below. All rams listed are suitable for H2S service per NACE MR-01-75.
CAMRAM packers and top seals are standard for all U II BOP variable bore
rams. The variable bore ram packer contains steel reinforcing inserts similar to
those in the Cameron annular BOP packer. The inserts rotate inward when the
rams are closed so the steel provides support for the rubber which seals against
the pipe. SD-5129
Ram Body
U II BOP Variable Bore Ram Part Numbers U II BOP Variable Bore Ram
31
TOC
• The Cameron shearing blind ram has a single-piece body with an integrated SD-10827
U II BOP H2S Shearing Ram Assemblies U II BOP H2S Shearing Blind Ram
Item
Item Description
Description 18-3/4" 10,000 and
15,000 psi
1 Upper Ram Subassembly 644759-01
2 Ram 644752-01 CAMRAM 350 Shearing Blind Ram Blade and Side Packers
7 Blade Insert 644519-03 Item Description 18-3/4" 10,000 and
Item Description
8 Cap Screw 644524-01 15,000 psi
9 Lower Ram Subassembly 644759-02 3 Blade Packer, High Temperature 644904-01
10 Ram 644752-02 4 Left Side Packer, High Temperature 644905-01
11 Blade Insert 644519-02 5 Right Side Packer, High Temperature 644905-02
12 Pin 200231-00 6 Top Seal, High Temperature 645246-01
Note: All packers and top seals (Items 3, 4, 5, 6) are the same as the shearing blind ram shown above.
32
TOC
T BOP
The Cameron T blowout preventer offers a unique combination of benefits, • Hydraulic stud tensioning ensures that stud loading is consistently accurate
including safety, economy, reliability, extended service life, reduced height and and even.
fast and easy service. • Hydraulically operated locking mechanisms, ST locks, act directly on the
Side ram removal on the T BOP permits reduced stack height and facilitates operating piston tailrod and are interlocked by sequence caps to ensure that
change-out of rams and packers. Sliding the rams to the side simplifies access locks are opened before the BOP is opened.
and handling and reduces vertical clearance requirements. • Bonnet studs instead of bonnet bolts reduce the need to make and break
The T BOP is available in a modular design which greatly reduces stack threads in the BOP body.
height. This design is possible because the side ram removal feature of the T
• Most operating system seals can be replaced with the bonnet in the ram-
BOP allows for construction of a BOP stack with virtually no extra space
change position without removing the bonnets.
between BOP body cavities. Each BOP body or module has only a slightly
raised face and a gasket prep. • The standard T BOP has a large enough piston area to shear all commonly
The design of the T is based on Cameron’s experience with the highly used sizes and grades of drill pipe.
successful U and U II ram-type BOPs and combines much of this proven Other features include hydraulically opening bonnets, forged body and
technology including: a wide selection of rams to meet all applications. See pages 40 and 41 for
• Metal-to-metal bonnet gaskets increase the safety and reliability in critical rams available to fit the T BOP.
service applications.
SD-9599
33
TOC
SD-10806 SD-10806
ST Lock Lock
34
TOC
T BOP Dimensions
Both the 13-5/8" 10,000 psi WP and the 18-3/4" 15,000 psi WP T BOPs are D Centerline of preventer to outlet flange or hub face. This distance is
available in single, double and modular configurations. In addition, end variable and must be determined per individual specifications
preparations can be API flange, clamp hub or studded connections. E-1 Top of preventer to centerline of outlet -- flanged
The following designations refer to the T BOP dimensional drawings on this E-2 Top of preventer to centerline of outlet -- Cameron clamp hubs
page: E-3 Top of preventer to centerline of outlet -- studded x flanged
A-1 Length -- bonnets closed, with ST locks E-4 Top of preventer to centerline of outlet -- modular
A-2 Length -- bonnets opened, with ST locks F-1 Top of upper ram to top flange face
A-3 Length -- bonnets closed, locking screws locked F-2 Top of upper ram to top hub face
A-4 Length -- bonnets opened, locking screws unlocked F-3 Top of upper ram to studded face
B-1 Height -- flanged F-4 Top of upper ram to modular face
B-2 Height -- clamp hubs G Height of ram
B-3 Height -- studded x flanged H Centerline of upper outlet to centerline of lower outlet
B-4 Height -- modular J Centerline of upper ST lock (or locking screw) to centerline of lower
C Width -- no side outlets ST lock (or locking screw)
A-3 (Bonnets Closed) A-1 (Bonnets Closed)
s
s
A-4 (Bonnets Opened) A-2 (Bonnets Opened)
s
s
s s s s s s
F
F
E E t
t
G
G s s
t
t s s s
s
B J B J
H H
t t
t t
SD-8635 SD-8491
t
t
C
s
C
s
s
s
D
s
D
s
s
s
SD-8635 SD-8492
35
TOC
1
3
6
7
5
8
13
10
SD-10809
11 16
12
36
TOC
45
42
43
44
46 59
79 57
50
78 49
86 60
53
37 36
38
39
40
48 41
47
66
61
58
56
55
54
52 51
51
84
73 72
74
SD-10808
85
69 30
65
64
63
62
68 71
67 75
76
77
70
32
31
33
13-5/8" 10,000 psi WP T BOP Bonnet Subassembly Exploded View
34
35
37
TOC
3
2
4
8
7
5
8
13
10
11
12
17
16
SD-8060
38
TOC
57
56 54
51
51 59
51 52
SD-8061
75 30
76 73 74
78 63
80 79
81 82
83
64
32
31
77
33
34
35
39
TOC
Wear Pad
Screw
40
TOC
One set of Cameron variable bore rams seals on several sizes of pipe or
hexagonal kelly. Variable bore rams are available in the size ranges listed in the CAMRAM Packer
chart below. All rams listed are suitable for H2S service per NACE MR-01-75. Ram Body
CAMRAM packers and top seals are standard for all T BOP variable bore rams.
The variable bore ram packer contains steel reinforcing inserts similar to those in
the Cameron annular BOP packer. The inserts rotate inward when the rams are
closed so the steel provides support for the rubber which seals against the pipe.
SD-10831
41
TOC
TL BOP
The Cameron TL blowout preventer is designed to meet the demand for a • 18-3/4” 15,000 TL BOPs utilize ST locks which are hydraulically
lightweight BOP for offshore and subsea applications. By eliminating separate operated and act directly on the operating piston tailrod and are
bonnets and intermediate flanges, the weight of the TL has been reduced by as interlocked by sequence caps to ensure that locks are opened before the
much as 30% compared to similar models. This is particularly advantageous BOP is opened.
on offshore platforms where weight is critical. By converting to a TL system, an Other features include hydraulically opening bonnets, forged body and a
operator can drill the entire well with one BOP stack replacing the old two-stack wide selection of rams to meet all applications.
system.
The design of the TL is based on experience with the U II and T BOPs and TL BOP Rams
combines much of this field-proven technology including: Rams available for the 5000 and 10,000 psi TL BOP include standard pipe
• Side ram removal and wear pads on the bottoms of the rams. rams as well as Cameron Flexpackers in 5” to 7” and 2-7/8” to 5” pipe sizes.
Also, a DVS shear ram was developed for the TL BOP. The DVS shear ram
• Bonnet seal carrier which eliminates the need for high makeup torque on
is similar to a Cameron shearing blind ram and has two “V” blades for more
bonnet studs and nuts.
effective shearing. During testing, these rams sheared 6-5/8”, 27.6 lb per foot,
• Bonnet studs instead of bonnet bolts to reduce the need to make and S-135 pipe with 2200 psi closing pressure.
break threads in the BOP body. The 15,000 psi TL BOP uses the same field proven rams as the 18-3/4”
• Most operating system seals can be replaced with the bonnet in the ram- 15,000 psi T BOP.
change position without removing the bonnets.
• 18-3/4” 5000 and 10,000 TL BOPs are fitted with hydraulically operating
locking mechanisms, wedgelocks, which lock the ram hydraulically and
hold the rams mechanically closed even when actuating pressure is
released. The operating system can be interlocked using sequence caps
to ensure that the wedgelock is retracted before pressure is applied to
open the BOP.
TL BOP Specifications
BOP Size Weight w/ Wedglocks Weight w/ Wedglocks Weight w/ Lockscrews Weight w/ Lockscrews Height Height Height Height
and Single Double Single Double SingleSingleDoubleDouble
Working Pressure STD X Flange STD X Flange STD X Flange STD X Flange STD X Flange Hub X Hub STD X Flange Hub X Hub
18-5/8" 10,000 psi 23,100 lb 36,600 lb 21,900 lb 42,400 lb 41.25” 41.12” 67.75” 68.62”
18-5/8" 15,000 psi 38,100 lb 58,400 lb 36,600 lb 55,400 lb 47.37” 51.12” 76.59” 80.25”
BOP Size Length Length Length Length Height Height Height Height
Closing Opening Closing Opening
and Wedglocks Wedglocks Lockscrews Locked Lockscrews Unlocked Single Single Double Double
Volume Volume Ratio Ratio
Working Pressure Bonnets Closed Bonnets Open Bonnets Closed Bonnets Open STD X Flange Hub X Hub STD X Flange Hub X Hub
18-5/8" 10,000 psi 151.00” 184.00” 158.38” 218.38” 20.20 Gallon 19.40 Gallon 10.3:1 3.2:1
18-5/8" 15,000 psi 151.00” 184.00” 164.68” 221.75” 24.30 Gallon 22.40 Gallon 6.7:1 3.1:1
42
TOC
59 24
58
1
8
21
11 22
60 16 15
17
51
61
9
16 17
19 18
56
55
43
52 34
21
20
12
42 13 14
54
10 3
2 32
36 35
44 25 6
23 35
48 5
37
46 61 33
51
40 26
60
50
39 28
49
24
3
30
35
6
31 35
27 29 30
4
38 31
37
7 33
41 43
38
47
7
45 TL BOP Exploded View SD-11128-99
43
TOC
UL and UM BOPs
The Cameron UL and UM BOPs are lightweight blowout preventers • Bonnet seal carrier is available to eliminate the need for high makeup torque
designed for easy maintenance and long life. Both designs complement the on bonnet studs and nuts.
existing line of U preventers with interchangeable bonnets which can be • Hydraulically operated locking mechanisms, wedgelocks, are available for
installed on any comparable size U BOP. In addition, the bonnet of the UM subsea applications.
BOP features full stroke operation for one-step ram removal. Other features of • Most operating system seals can be replaced with the bonnet in the ram-
the UL and UM BOPs include: change position without removing the bonnets.
• The UL and UM BOPs utilizes the same rams as the U BOP.
Other features include hydraulically opening bonnets, forged body and a
wide selection of rams to meet all applications.
SD-11255-99
UL Blowout Preventer
44
TOC
31
23
31
UL BOP Components 35
6
3
30
37
42
32
5
33
34
26
22
35
6
37
4
43
33
34
41
29
28
27
24
38
20
39
46 47
11
12
14
51
10
40
2
36
25
45
TOC
Packer Inserts
Bore of Top
Quick-Release Top
Access Flaps
Packer
Vent
Donut
SD-203-03
Operating Piston
Vent
46
TOC
47
TOC
7-1/16" 3000 - 11" 15,000 psi WP D and DL Annular BOP Part Numbers
7-1/16" 3000 and 7-1/16" 10,000 7-1/16" 15,000 7-1/16" 20,000 11" 3000 and 11" 10,000 11" 15,000
Item Description 5000 psi psi psi psi 5000 psi psi psi
Qty Part No. Qty Part No. Qty Part No. Qty Part No. Qty Part No. Qty Part No. Qty Part No.
3 Piston 1 699333-01 1 699333-02 1 699333-10 1 699333-11 1 699333-03 1 699333-04 1 699333-38
4 Inner Cylinder Head 1 699334-01-02 1 699334-02-02 1 699334-10 1 699334-11-01 1 699334-27 1 699334-28 1 699334-38
5 Outer Cylinder Head` 1 699335-01 1 699335-02 1 699335-10 1 699335-11 1 699335-27 1 699335-28 1 699335-38
6 Pusher Plate 1 699336-01 1 699336-02 1 699336-10 1 699336-11 1 699336-03 1 699336-04 1 699336-38
7 Donut & Packer**** 1 644856-02† 1 644856-03† 1 644856-11-00-01 1 644856-11-00-01 1 644856-04† 1 644856-05† 1 644800-38
9 Lock Ring 1 699337-01 1 699337-02 1 699337-10 1 699337-11 1 699337-27 1 699337-28 1 699337-38
10 Actuator Ring 1 699338-01 1 699338-02 1 699338-10 1 699338-11 1 699338-27 1 699338-28 1 699338-38
11 Actuator Screw 4 49089-03 4 49089-01 4 49089-01 4 49089-01 4 49089-01 4 49089-01 4 49089-01
12 Actuator Screw Bushing 4 699343-03 4 699343-01 4 699343-01 4 699343-01 4 699343-01 4 699343-01 4 699343-01
13 Outer Cylinder Lock Segment - __ - __ - __ 3 614350-02 3 614350-03 3 614350-04 3 614350-09
14 Lock Segment Retaining Ring - __ - __ - __ 1 49416-02 1 49416-03 1 49416-04 1 49416-09
15 Support Plate 1 2010341-01 1 2010341-02 1 049793-15 1 2010341-11 1 2010341-03 1 2010341-07 1 2010341-13
16 Top Trash Seal 1 46045-05 1 46045-06 1 46045-14 1 46045-10 1 46045-11 1 46045-12 1 46045-15
17 Actuator Screw Bearing 8 699344-03 8 699344-01 8 699344-01 8 699344-01 8 699344-01 8 699344-01 8 699344-02
29 Anchor Shackle 4 701002 4 701003 4 663311-13 4 663311-13 4 701004 4 663311-13 4 663311-13
30 Inner Cylinder Stud 8 46037-24 12 46037-16 12 46037-30 12 392002-09-00-70 6 46037-17 8 46037-19 12 46037-26
31 Inner Cylinder Nut 8 49800-01 12 49800-01 12 49800-08 12 49800-03 6 49800-04 8 49800-05 12 49800-05
32 Stud - __ - __ - __ - __ - __ - __ - __
33 Nut - __ - __ - __ - __ - __ - __ - __
34 Lock Ring Access Port Plug 2 5930-04-10 2 5930-05-10 2 5930-07-10 2 5930-07-10 2 5930-05-10 2 5930-07-10 2 614271-03
35 Hydraulic Port Plug 2 5930-04-10 2 5930-05-10 2 5930-05-10 2 5930-05-10 2 5930-05-10 2 5930-05-10 2 5930-06-10
36 Pusher Plate Screw 24 46052-04 24 46052-05 24 46052-08 24 46052-08 24 46052-06 24 46052-07 24 46052-10
37 Actuator Ring Stop Screw 4 46052-03 4 46052-01 4 46052-01 4 46052-01 4 49477-01 4 49477-01 4 46052-01
38 Lifting Eye* 4 700734 4 700734 4 12185-03 4 12185-03 4 11849 4 11849 4 11849
39 Lifting Eye* 4 12185-03 4 12185-03 4 12185-02 4 12185-02 4 12185-03 4 12185-03 4 12185-03
40 Lifting Eye* 4 12185-02 4 12185-02 4 700735 4 700735 2 12185-01 2 12185-02 2 12185-02
41 Lifting Eye* 4 700735 4 700735 4 700734 2 700734 4 12185-02 - __ - __
42 Lifting Eye* - __ - __ - __ - __ 2 700735 - __ - __
43 Stud - __ - __ - __ - __ - __ - __ - __
44 Nut - __ - __ - __ - __ - __ - __ - __
45 Bushing Retaining Screw 4 5940-01-18 4 702514-25-20-08 4 702514-25-20-08 4 702514-25-20-08 4 702514-25-20-08 4 702514-25-20-08 4 702514-25-20-08
46 Oil Injection Fitting 4 700710 4 700710 4 700710 4 700710 2 700594 2 700594 2 700594
47 Lifting Eye* - __ 4 12185-01 - __ - __ 2 701960 - __ - __
50 Support Plate Bearing Ring 1 49122-01 1 49122-02 1 49122-07 1 49122-07 1 49122-03 1 49122-04 1 49122-10
51 Piston ID Bearing Ring 1 2010196-13 1 2010196-15 1 2010196-36 1 2010196-32 1 2010196-17 1 2010196-19 1 2010196-40
52 Inner Cyl. OD Bearing Ring 1 2010196-01 1 2010196-03 1 2010196-33 1 2010196-33 1 2010196-05 1 2010196-07 1 614246-49
53 Outer Cyl. ID Bearing Ring 1 2010196-02 1 2010196-04 1 2010196-34 1 2010196-34 1 2010196-06 1 2010196-08 1 614246-50
54 Piston OD Bearing Ring 1 2010196-14 1 2010196-16 1 2010196-35 1 2010196-31 1 2010196-18 1 2010196-20 1 2010196-39
55 Pusher Plate Bearing Ring 1 699345-04 1 699345-05 1 699345-08 1 699345-08 1 699345-02 1 699345-06 1 699345-10
56 Outer Cyl. ID Wiper Ring 1 700713 1 700810 1 705151 1 705151 1 700619 1 700812 1 706452
57 Inner Cyl. OD Wiper Ring 1 700715 1 700809 1 705152 1 705152 1 700618 1 700811 1 706451
58 Inner Cylinder ID Lip Seal 1 615851-31-01 1 615850-24-01 1 615850-37-01 1 615851-35-01 1 615850-15-01 1 615850-40-01 1 615850-28-01
59 Inner Cylinder ID Lip Seal 1 615851-32-01 1 615851-26-01 1 615851-35-01 1 615850-37-01 1 615850-14-01 1 615850-41-01 1 615850-27-01
60 Inner Cylinder OD Lip Seal 2 615847-30-01 2 615847-26-01 1 615846-26-01 1 615846-26-01 2 615847-17-01 1 615847-38-01 1 615846-21-01
61 Piston ID Lip Seal 1 615851-33-01 1 615851-27-01 1 615851-36-01 1 615851-36-01 1 615851-16-01 1 615851-38-01 1 615850-25-01
62 Piston OD Lip Seal 1 615847-31-01 1 615847-27-01 1 615847-35-01 1 615847-37-01 1 615847-16-01 1 615847-39-01 1 615846-19-01
63 Outer Cylinder ID Lip Seal 2 615851-30-01 2 615851-25-01 1 615850-36-01 1 615850-36-01 2 615851-17-01 1 615851-37-01 1 615850-26-01
64 Outer Cylinder OD Lip Seal 1 615847-29-01 1 615847-25-01 1 615847-32-01 1 615847-36-01 1 615846-04-01 - __ 1 615846-20-01
65 Outer Cylinder OD Lip Seal 1 615847-28-01 1 615847-24-01 1 615847-33-01 1 615847-36-01 1 615846-03-01 1 615846-27-01 - __
66 Top ID Lip Seal 1 615851-29-01 1 615850-23-01 1 615850-35-01 1 615850-35-01 1 615850-13-01 1 615850-38-01 1 615850-29-01
67 Top OD Lip Seal 1 706258-11 1 706258-04 1 706258-01 1 706258-05 1 706258-02 1 706258-03 1 46001-01-42
68 Outer Cylinder ID Lip Seal - __ - __ 1 615851-34-01 1 615851-34-01 - __ 1 615850-39-01 1 615850-28-01
69 Inner Cylinder OD Lip Seal - __ - __ 1 615847-34-01 1 615847-34-01 - __ 1 615846-28-01 1 615846-21-01
75 Inner Cyl. ID Backup Ring* - __ - __ - __ 1 615378-02 - __ - __ 1 615378-01
76 Inner Cyl. OD Backup Ring* - __ - __ - __ 1 615622-02 - __ - __ 1 615378-06
77 Outer Cyl. ID Backup Ring* - __ - __ - __ 1 615378-03 - __ - __ 1 615378-06
78 Top ID Backup Ring* - __ - __ 1 615399-07 1 615378-04 - __ - __ 1 615378-05
*** Complete Replacement Kit 1 49742-01 1 49742-02 1 49742-13 1 49742-03 1 49742-09 1 49742-10 1 49742-14
*Not shown on the drawing
***Seals, bearings and scrapers
****These items are sold as a subassembly (packer and donut).
†CAMULAR™
48
TOC
13-5/8" 5000 - 21-1/4" 2000 psi WP D and DL Annular BOP Part Numbers
13-5/8" 13-5/8" 16-3/4" 18-3/4" 18-3/4" 20-3/4" 21-1/4"
Item Description 5000 psi 10,000 psi 3000 and 5000 psi 5,000 psi 10,000 psi 3000 psi** 2000 psi**
Qty Part No. Qty Part No. Qty Part No. Qty Part No. Qty Part No. Qty Part No. Qty Part No.
3 Piston 1 699333-05 1 699333-06 1 699333-18 1 699333-44 1 699333-21 1 699333-47 1 699333-47
4 Inner Cylinder Head 1 699334-05-02 1 699334-30 1 699334-18 1 699334-44 1 699334-21 1 699334-47 1 699334-47
5 Outer Cylinder Head` 1 699335-05 1 699335-30 1 699335-18 1 699335-44 1 699335-21 1 644172-01 1 644172-01
6 Pusher Plate 1 699336-05 1 699336-06 1 699336-18 1 699336-44 1 699336-21 1 699336-47 1 699336-47
7 Donut & Packer**** 1 644856-06† 1 644856-07† 1 644800-18 1 644856-09 1 644856-01† 1 644800-47 1 644800-47
9 Lock Ring 1 699337-05 1 699337-30 1 699337-18 1 699337-44 1 699337-21 - __ - __
10 Actuator Ring 1 699338-05 1 699338-30 1 699338-18 1 699338-44 1 699338-21 - __ - __
11 Actuator Screw 4 49089-01 4 49089-02 4 49089-02 4 49089-04 4 49089-02 - __ - __
12 Actuator Screw Bushing 4 699343-01 4 699343-02 4 699343-02 4 699343-04 4 699343-02 - __ - __
13 Outer Cylinder Lock Segment 3 614350-05 3 614350-01 3 614350-07 3 614350-13 3 614350-06 - __ - __
14 Lock Segment Retaining Ring 1 49416-05 1 49416-01 1 49416-07 1 49416-09 1 49416-06 - __ - __
15 Support Plate 1 2010341-05 1 2010341-06 1 2010341-12 1 2010341-17 1 615483-01 1 2010341-18 1 2010341-18
16 Top Trash Seal 1 46045-01 1 46045-09 1 46045-08 1 46045-18 1 46045-16 - __ - __
17 Actuator Screw Bearing 8 699344-01 8 699344-02 8 699344-02 8 699344-02 8 699344-02 - __ - __
29 Anchor Shackle 4 663311-13 4 663311-13 4 663311-13 4 663311-13 4 663311-13 4 663311-13 4 663311-13
30 Inner Cylinder Stud 6 46037-19 12 46037-20 8 46037-25 16 46037-32 16 46037-27 16 46037-34 12 46037-34
31 Inner Cylinder Nut 6 49800-05 12 49800-05 8 49800-06 16 49800-07 16 49800-07 16 49800-12 12 49800-12
32 Stud - __ - __ - __ - __ - __ 20 5919-08 24 6306-16-10
33 Nut - __ - __ - __ - __ - __ 20 2709000-18-09 24 2709000-15-09
34 Lock Ring Access Port Plug 2 5930-07-10 2 5930-08-10 2 614271-01 2 614271-02 2 614271-01 2 5930-06-10 2 5930-06-10
35 Hydraulic Port Plug 2 5930-05-10 2 5930-06-10 2 5930-06-10 2 5930-06-10 2 5930-06-10 - __ - __
36 Pusher Plate Screw 24 46052-08 24 46052-09 24 46052-09 24 46052-14 24 46052-11 24 46052-15 24 46052-15
37 Actuator Ring Stop Screw 4 46052-01 4 46052-02 4 46052-02 4 46052-02 4 46052-02 4 46052-16 4 46052-16
38 Lifting Eye* 4 11849 4 11849 4 11849 4 11849 4 11849 2 700649 2 700649
39 Lifting Eye* 4 12185-03 4 700649 4 12185-02 4 700649 4 700649 2 12185-02 4 12185-02
40 Lifting Eye* 4 12185-02 2 12185-01 2 12185-01 2 12185-03 2 12185-03 - __ - __
41 Lifting Eye* - __ 4 12185-03 4 700446 4 12185-02 4 12185-02 - __ - __
42 Lifting Eye* - __ 2 700446 - __ - __ - __ - __ - __
43 Stud - __ - __ - __ - __ - __ 36 615447-01-10 24 615447-02-10
44 Nut - __ - __ - __ - __ - __ 36 2709000-19-09 24 2709000-19-09
45 Bushing Retaining Screw 4 702514-25- 4 702514-25- 4 702514-25- 4 702514-25- 4 702514-25- - __ - __
20-08 20-08 20-08 20-08 20-08
46 Oil Injection Fitting 4 700594 2 700594 2 700594 4 700594 2 700594 - __ - __
47 Lifting Eye* - __ - __ - __ - __ - __ - __ - __
50 Support Plate Bearing Ring 1 49122-05 1 49122-06 1 49122-08 1 49122-11 1 615482-01 1 49122-12 1 49122-12
51 Piston ID Bearing Ring 1 2010196-21 1 2010196-23 1 2010196-30 1 2010196-51 1 2010196-29 1 2010196-53 1 2010196-53
52 Inner Cyl. OD Bearing Ring 1 2010196-09 1 2010196-11 1 2010196-25 1 2010196-49 1 2010196-47 1 2010196-54 1 2010196-54
53 Outer Cyl. ID Bearing Ring 1 2010196-10 1 2010196-12 1 2010196-26 1 2010196-50 1 2010196-28 1 2010196-55 1 2010196-55
54 Piston OD Bearing Ring 1 2010196-22 1 2010196-24 1 2010196-42 1 2010196-52 1 2010196-30 1 2010196-56 1 2010196-56
55 Pusher Plate Bearing Ring 1 699345-01 1 699345-03 1 699345-07 1 699345-14 - 699345-13 - __ - __
56 Outer Cyl. ID Wiper Ring 1 700320 1 700319 1 700994 1 708000 1 705710 - __ - __
57 Inner Cyl. OD Wiper Ring 1 700581 1 700320 1 700993 1 708003 1 705711 1 615399-12 1 615399-12
58 Inner Cylinder ID Lip Seal 1 615850-21-01 1 615850-32-01 1 615850-44-01 1 615850-04-01 1 615851-02-01 1 615850-12-01 1 615851-03-01
59 Inner Cylinder ID Lip Seal 1 615850-20-01 1 615850-33-01 1 615850-45-01 1 615851-01-01 1 615850-08-01 1 615851-03-01 1 615850-12-01
60 Inner Cylinder OD Lip Seal 2 615847-22-01 1 615847-40-01 2 615846-27-01 2 615846-05-01 2 615846-16-01 1 615846-18-01 1 615846-18-01
61 Piston ID Lip Seal 1 615851-23-01 1 615850-30-01 1 615850-46-01 1 615850-03-01 1 615850-09-01 1 615850-11-01 1 615850-11-01
62 Piston OD Lip Seal 1 615847-21-01 1 615846-22-01 1 615846-29-01 1 615846-01-01 1 615846-15-01 1 615846-17-01 1 615846-17-01
63 Outer Cylinder ID Lip Seal 2 615851-24-01 2 615850-31-01 1 615850-43-01 2 615850-02-01 2 615850-07-01 - __ - __
64 Outer Cylinder OD Lip Seal 1 615846-11-01 1 615846-23-01 - __ - __ - __ 2 615850-10-01 2 615850-10-01
65 Outer Cylinder OD Lip Seal 1 615846-10-01 1 615846-24-01 1 615846-29-01 1 615846-02-01 1 615846-14-01 - __ - __
66 Top ID Lip Seal 1 615850-19-01 1 615850-34-01 1 615850-42-01 1 615850-01-01 1 615850-01-01 - __ - __
67 Top OD Lip Seal 1 706258-07 1 706258-10 1 706258-09 - __ 1 706258-12 - __ - __
68 Outer Cylinder ID Lip Seal - __ 1 615851-28-01 - __ - __ - __ - __ - __
69 Inner Cylinder OD Lip Seal - __ 1 615846-25-01 - __ - __ - __ - __ - __
75 Inner Cyl. ID Backup Ring* - __ - __ - __ - __ - __ - __ - __
76 Inner Cyl. OD Backup Ring* - __ - __ - __ - __ - __ - __ - __
77 Outer Cyl. ID Backup Ring* - __ - __ - __ - __ - __ - __ - __
78 Top ID Backup Ring* - __ - __ - __ - __ 1 615378-01 - __ - __
*** Complete Replacement Kit 1 49742-11 1 49742-12 1 49742-08 1 49742-16 1 49742-17 1 49742-18 1 49742-18
**Exploded view on page 47 is not representative of this assembly.
***Seals, bearings and scrapers.
****These items are sold as a subassembly (packer and donut).
†CAMULAR™
49
TOC
56 1 Wiper Ring 51
61
57 1 Wiper Ring
58 1 Seal Ring 54 62
59 1 Seal Ring
60 2 Seal Ring
61 1 Seal Ring
62 1 Seal Ring
63 2 Seal Ring
64 1 Seal Ring
65 1 Seal Ring
66 1 Seal Ring SD-5306
67 2 Seal Ring
D BOP
*Item numbers are standard bill of material numbers for a complete assembly.
Higher Temperatures
For temperatures greater than 250°F and high H2S levels, CAMULAR severe Packer
service elastomer is recommended. The D BOP packing element comes only as
a complete subassembly, which includes packer and donut Contact your local
Cameron representative for details. CAMULAR part numbers are listed on
pages 48-49.
Donut
SD-5306
SD-10821
SD-10822
51
TOC
Tubing Safety Packer* Safety Pipe Top Wear Insert Wear Insert Wear Insert Slip Insert
Size Ram Assembly** Packer** Ram Body** Seal** Packer Subassembly** Packer** Subassembly** Subassembly**
Blind 46955-01 46941-01 46938 46950 __ __ __ __
1.050" 46955-02 46941-04 46940-03 46950 614267-01 614262-01 614259-01 614442-01
1.315" 46955-03 46941-03 46940-02 46950 614267-02 614262-02 614259-02 614442-02
1.660" 46955-04 46941-02 46940-01 46950 614267-03 614262-03 614259-03 614442-03
1.900" 46955-05 46942-01 46940-04 46950 614267-04 614262-04 614259-04 614442-04
2.000" 46955-06 46942-02 46940-05 46950 614267-05 614262-05 614259-05 614442-05
2.062" 46955-07 46942-03 46940-06 46950 614267-06 614262-06 614259-06 614442-06
2.375" 46955-08 46942-04 46939-01 46950 614267-07 614262-07 614259-07 614442-07
2.875" 46955-09 46942-05 46939-02 46950 __ __ __ 614442-08
*Includes pipe ram body, top seal and safety packer.
**2 of each required.
Shear Blade
Upper Ram Body
Bolt SD-5219
Blade Retainer
Shear Ram
Shear Ram Part Numbers
(Sealing-Type Shear Ram Available for 4-1/16" and 7-1/16" 5000 psi Not Shown)
BOP BOP Shear Ram Assembly* Upper Ram Body Lower Ram Body Shear Blade Blade Retainer Bolts
Description
Description Qty Part Number Qty Part Number Qty Part Number Qty Part Number Qty Part Number Qty Part Number
4-1/16" 5000 and 10,000 psi G-2 1 614411-01 1 614402-02 1 614402-01 1 614413-01 2 614414-01 4 702585-14-00-24
4-1/16" 10,000 and 15,000 psi S/QRC 1 614411-01 1 614402-02 1 614402-01 2 614413-01 2 614414-01 4 702585-14-00-24
4-1/6" 25,000 psi S/QRC 1 644254-01 1 644253-01 1 644253-02 2 644252-01 2 644252-01 2 701683
*Shear ram assembly includes upper and lower shear rams.
SD-10819
Wireline Packer
Lower Ram Body
Screw**
Wireline Ram
Wireline Ram Part Numbers
(4-1/16" 5000 and 10,000 psi G-2 and 4-1/16" 10,000 and 15,000 psi S/QRC)
Wireline Wireline Ram Upper Ram Lower Ram Top Wireline Wireline
Size Assembly* Body Body Seal Packer Guide
(In.) (1 Required) (1 Required) (1 Required) (2 Required) (2 Required) (2 Required)
0-0.250 614263-06 614236-01 614235-01 46950 46941-10 614264-01
0.312 614263-01 614236-01 614235-01 46950 46941-05 614264-01
0.438 614263-02 614236-02 614235-02 46950 46941-06 614264-02
0.562 614263-03 614236-03 614235-03 46950 46941-07 614264-03
0.750 614263-04 614236-04 614235-04 46950 46941-08 614264-04
0.875 614263-05 614236-05 614235-05 46950 46941-09 614264-05
*Wireline ram assembly includes upper and lower wireline rams.
**Screw part number: 702507-06-00-06.
52
TOC
Clamp Connections
Bearing Ring
Load Ring
SD-7039
Nut
53
TOC
WESTERN HEMISPHERE
Canada Cameron Germany The Netherlands
Cooper Cameron Corporation 4341 S.W. 33rd Street Cameron GmbH Cameron B.V.
Cooper Cameron Ltd. Oklahoma City, Oklahoma P.O. Box 3225 P.O. Box 121, 9600 AC
5003 93rd Street 73119 29232 Celle, Germany Produktieweg 14, 9601 MA
Edmonton, Alberta T6E 5S9 Tel: (405) 682-1661 Tel: 011+49+5141+8060 Hoogezand, The Netherlands
Canada Fax: (405) 682-1051 Fax: 011+49+5141+806333 Tel: 011+31+598+396200
Tel: (403) 434-3476 Ireland Fax: 011+31+598+396298
Cameron Elastomer
Fax: (403) 437-7397 Technology Cameron Ireland Limited ASIA PACIFIC/MIDDLE
Mexico 29501 Katy Freeway Aghafad, Longford EAST
Cooper Cameron de Mexico, Katy, Texas 77450 Republic of Ireland
S.A. de C.V. Tel: (281) 391-4600 Tel: 011+353+43+45301 Australia
P.O. Box MEB-MX17-390 Fax: (281) 391-4640 Fax: 011+353+43+41560 Cameron Australia Pty. Ltd.
Veracruz, Ver. Cameron Nigeria P.O. Box 519
Mexico C.P, 91707 P.O. Box 10286 Cooper Cameron Corp. Cheltenham 3192
Tel: 011+ 522+981-1008 Highway 90 @ FM 1909 Nigeria Melbourne, Victoria, Australia
Fax: 011+ 522+981-1009 Liberty, Texas 77575 Plot 45 Trans Amadi Ind. Tel: 011+61+39+584-3100
Tel: (409) 336-8811 Layout Fax: 011+61+39+584-6658
South America
Cameron Argentina S.A.I.C. Fax: (409) 336-2822 P.M.B. 995 Cameron Australia Pty. Ltd.
Av. Antartida Argentina 2711 Port Harcourt, Nigeria P.O. Box 1475
EASTERN HEMISPHERE Tel: 011+234+84+331264 Canning Vale 6155
2800 Zarate
Pica., Buenos Aires Fax: 011+2341-2694003 Perth Western Australia 6155
Austria
Repulica Argentina Canada Works Cooper Cameron Corp. Tel: 011+61+9+455-3655
Tel: 011+54+487+22297 Dorenkampgasse 3 Nigeria Fax: 011+61+9+455-3636
Fax: 011+54+487+23404 P.O. B. 24 Ogunu Road Singapore
United States A-1107 Vienna, Austria P.M.B. 1066 Cameron (Singapore) Pte. Ltd.
Cameron Tel: 011+43+1+682-131 Warri, Nigeria No. 2 Gul Circle
600 East 57th Place Fax: 011+43+1+682-133; Tel: 011+871+685052494 Jurong Industrial Estate
Anchorage, Fax: 011+871+6850524946 Locked Bag Service No. 3
England
Alaska 99518-5761 Cooper Cameron (U.K.) Ltd. Norway Jurong Town Post Office
Tel: (907) 562-2332 Queen Street, Stourton Cameron Norway A/S Singapore 2262
Fax: (907) 562-3880 Leeds, West Yorkshire P.O. Box 66 Republic of Singapore
LS10 1SB England 5364 Agotnes Tel: 011+65+861-335
Cameron Fax: 011+65+861-6197
P.O. Box 457 Tel: 011+44+113+2701144 Bergen, Norway
Berwick, Louisiana 70392 Fax: 011+44+113+7276778 Tel: 011+47+55+334710
Tel: (504) 395-6171 Fax: 011+47+5+334593
France
Fax: 504) 395-9350 Cameron France, S.A. Cameron Norway A/S
Cameron Plaine Saint-Pierre Mekjarvik 1
P.O. Box 457 CS 620 4070 Randaberg
Highway 90 East 34535 Beziers Cedex, Stavanger, Norway
Patterson, Louisiana 70392 Beziers, France Tel: 011+47+51+415000
Tel: (504) 395-6171 Tel: 011+33+67+111500 Fax: 011+47+51+418160
Fax: (504) 395-1297 Fax: 011+33+67+111600 Scotland
Cameron Gabon Cameron (Great Britain) Ltd.
No. 6 Holloway Blvd. Cameron Gabon S.A. Badentoy Industrial Park
Ville Platte, Louisiana B.P. No. 869 Badentoy Avenue
70586-9778 Port Gentil Portlethen, Aberdeen
Tel: (318) 363-7500 Republique Gabonaise AB1 4YB Scotland
Fax: (318) 363-7516 Tel: 011+241+553026 Tel: 011+44+1224+282000
Fax: 011+241+555897 Fax: 011+44+1224+781800
54
TOC
Sales Offices
WESTERN HEMISPHERE
Canada Cameron Cameron Cameron
Cooper Cameron Corporation Balfer Ltd. P.O. Box 114 P.O. Box 901
Cooper Cameron Ltd. Zona Franca Mt. Pleasant, Michigan 48858 Evanston, Wyoming
600, 715 - 5th Avenue S.W. P.O. Box 117-D Tel: (517) 772-5555 82931-0901
Calgary, Alberta T2P 2X6 Punta Arenas, Chile Fax: (517) 773-2842 Tel: (307) 789-2665
Canada Tel: 011+56+61+213931 Cameron
Fax: (307) 789-4734
Tel: (403) 261-2800 Fax: 011+56+61+214379 1020 Hillcrest Drive Cameron
Fax: (403) 262-5181 Cameron Venezolana S.A. Laurel, Mississippi 39440 240 Industrial Boulevard
Cooper Cameron Corporation Apartado 1467 Tel: (601) 649-8900 Rock Springs, Wyoming 82901
Cooper Cameron Ltd. Maracaibo, Venezuela 4001-A Fax: (601) 649-8909 Tel: (307) 382-3134
8614 112 Street Tel: 011+58+61+347231 Cameron
Fax: (307) 382-3190
Grande Prairie, Fax: 011+58+61+349559 5729 Leopard Street, Bldg. 9 Cameron
Alberta T8V 5X4 Ingram Cactus Ltd. Corpus Christi, Texas 78408 P.O. Box 1463
Canada C/o Lifkin De Venezuela Tel: (512) 289-1455 1336 East 335 South
Tel: (403) 539-2333 S.A. Carret A. Perija KM 15 Fax: (512) 289-6251 Vernal Utah 84078
Fax: (403) 539-2334 Maracaibo, Venezuela Tel: (8091) 789-1778
Cameron
Mexico Tel: 011+58+62+47001 1505 Elm Street, Suite 950
Fax: (801) 789-1739
Cooper Cameron de Mexico, Fax: 011+58+61+360087 Dallas, Texas 75201 EASTERN HEMISPHERE
S.A. de C.V. United States Tel: (214) 855-7823
Calle 37 No. 147-A Cameron Fax: (214) 855-0033 Congo
Col. Hector Perez Martinez P.O. Box 3545 Cameron France
Cameron
24100 Ciudad Del Carmen Bakersfield, California 93385 Antenne de Point-Noire
P.O. Box 1212
Camp Mexico Tel: (805) 323-8297/8183 B.P. 5491 Cote Sauvage
Houston, Texas 77251-1212
Tel: 011+ 52+938-27924 Fax: (805) 323-8595 Pointe-Noire Congo
Tel: (713) 939-2211
Fax: 011+ 52+938-27924 Tel: 011+242+945563
Cameron Fax: (713) 939-2620
Cooper Cameron de Mexico, 1238 Alice Street, A Fax: 011+242 +940283
Cameron
S.A. de C.V. Woodland, California 95695 Egypt
P.O. Box 1311
Avenida Homero 1804, Tel: (916) 666-4144 Cameron
Longview, Texas 75606
Ste 403 Fax: (916) 666-5916 Villa El Baraka
Tel: (903) 236-4884
Co. Chapultec Morales No. 8 Road 279
Cameron Fax: (903) 234-0336
11510 Mexico D.F. New Maadi
1700 Broadway, Suite 1400
Tel: 011+52+5+5800296 Cameron Cairo, Egypt ARE
Denver, Colorado 80290-1401
Fax: 011+52+5+395-8869 415 W. Wall, Suite 102 Tel: 011+202+352-0193
Tel: (303) 861-1850
Midland, Texas 79702 Fax: 011+202+352-0495
Cooper Cameron de Mexico, Fax: (303) 837-0408
Tel: (915) 682-4688
S.A. de C.V. England
Cameron Fax: (915) 682-4692
Paseo Villahermosa 701-37 Cooper Cameron (U.K.) Ltd.
201 Energy Center Parkway,
Seccion Lomas Cameron Unit 11, Brinell Way
Suite 402
Fracc. Plaza Villahermosa 270 So. Grandview Harfrey’s Industrial Estate
Lafayette, Louisiana 70508
86179 Villahermosa, Odessa, Texas 79761 Great Yarmouth, Norfolk
Tel: (318) 235-0051
Tabasco Mexico Tel: (915) 337-5475 NR31 OLU England
Fax: (318) 233-8659 (sales)
Tel: 011+52+93-513484 Fax: (915) 337-3001 Tel: 011+44+1493+440438
(318) 981-3322 (service)
Fax: 011+52+93-513484 Cameron Fax: 011+44+493+655405
Cameron
South America P.O. Box 2229 Ingram Cactus Ltd.
650 Poydras St.
Cameron Argentina Mills, Wyoming 82644 Shuttleworth Close
Poydras Center, Suite 2310
Cerrito 1070, Piso 2 Tel: (307) 472-0222 Gapton Hall Industrial Estate
New Orleans, Louisiana 70130
1010 Buenos Aires, Argentina Fax: (307) 265-1318 Great Yarmouth
Tel: (504) 529-7634
Tel: 011+54+811+4000 Norfolk NR31 ONQ England
Fax: (504) 522-8837
Fax: 011+54+811+4009 Tel: 011+44+1493+440444
Fax: 011+44+493+440254
55
TOC
Sales Offices
56
TOC
PO Box 1212
Houston Texas 77251-1212
Tel 713 939 2211
Fax 713 939 2620
http://www.camerondiv.com
© Cooper Cameron Corporation Cameron Division Printed in USA 12/96 TG7.5M TC1001 WR4393