Professional Documents
Culture Documents
Stabilizers: The Ideal Solution To Reduce Rolling Movement
Stabilizers: The Ideal Solution To Reduce Rolling Movement
POWER HYDRAULICS
STABILIZERS
Motor yachts over 10 metre length are frequently used on open waters. VETUS stabilizers are the ideal solution for
dramatically reducing the rolling movement of these vessels in bad weather or in heavy swells.
VETUS stabilizers consist of a hydraulically actuated pair of fins that are fitted to a vessel’s port and starboard
midships sections underwater. They are controlled by an on board gyroscope and automatically react to the rolling
movement of the vessel to create a damping effect.
Main advantages
• Increase comfort, stability on the autopilot and reduced risk of sea sickness
• Rain or shine, you will use your boat more often
• Higher boat value
STABILIZERS
Technical specifications
Standard fin sizes : 0.3 m2 - 0.4 m2 - 0.5 m2 - 0.6 m2 - 0.7 m2
Fin material : Stainless steel
System voltage : 24 Volts
NB: a converter (12 V to 24 V) is required when the vessel has a 12 Volt power supply (code: STA12/24)
03 04 05 06 07
A 142 176 215 250 291
B 431 497 554 600 605
C 620 716 801 873 1021
D 798 921 1024 1125 1318
E 0.3 0.4 0.5 0.6 0.7
VETUS can also design and supply the complete hydraulic system
if required.
Installation options
Available as a stand alone system
• Connected to a belt driven hydraulic pump with bearing support and pulley
or
• Connected to a hydraulic pump fitted to a SAE-A PTO on the engine or
gearbox
Scope of supply
The following parts are included:
A Basic set (code: STA24VA), consisting of:
• Control panel (1)
• Junction box (2)
• Roll sensor (‘solid state’ gyroscope) (3)
• Hydraulic valve block (4)
• Two actuator units with hydraulic cylinders (5)
Also required:
• Hydraulic pump(s) (7)
• Hydraulic tank (7)
• Hydraulic control unit (code: HT1024) (7)
(4)
(1)
(5)
Automatic centreing
Putting the gearbox in neutral or astern, the fins will centre
automatically. This reduces drag and makes manoeuvring in the
marina a lot easier.
(C)
VETUS CAN DESIGN AND SUPPLY THE COMPLETE HYDRAULIC SYSTEM IF REQUIRED