Professional Documents
Culture Documents
General Catalog: The Edge Is Yours
General Catalog: The Edge Is Yours
General Catalog
2005-2006
2 T H E E D G E I S Y O U R S
C A M E R O N
What is the edge you get with Cameron? It’s the difference
between a company that merely delivers and one that strives to
exceed your expectations. It’s the total value only the oil and gas
industry leader can deliver. Through leading-edge experience
and legendary reliability. Through cutting-edge, innovative
products and unmatched global support. Through our compet-
itive edge, you get the edge that makes you more competitive.
With Cameron, the edge is yours.
T H E E D G E I S Y O U R S 3
1 2 3 4
5 6 7 8
9 10 11 12
13 14 15 16
17 18 19 20
C A M S E R V
With CAMSERV™ as your OEM aftermarket resource, you’ll get a
higher level of support while you lower the cost of owning and
operating your equipment. Yes, CAMSERV is comprehensive,
but you determine the level of service you need — from annual
maintenance to a global alliance, from single to bundled. With
CAMSERV, the edge is service.
T H E E D G E I S S E R V I C E 5
WESTERN EASTERN
T he CAMSERV edge provides
Cameron customers with the
most comprehensive suite of
HEMISPHERE HEMISPHERE
D R I L L I N G S YS T E M S
From the first blowout preventer in 1922 to the largest installed
base of BOPs today, Cameron’s leadership has brought our
worldwide drilling customers innovative system solutions that
are safe, reliable, and cost-effective. With total systems exper-
tise in surface and subsea drilling and production that has
benefitted our customers for more than 80 years, you can
continue to rely on us for smart drilling control methods.
With Cameron, the edge is experience.
T H E E D G E I S E X P E R I E N C E 7
Riser
System
TL™ BOP
The TL BOP integrates many of the design features of
TL Blowout Preventer
Cameron’s popular T and U BOPs into one of the industry’s (shown with ST Locks)
most reliable and safe units. The TL offers side ram removal
and other features which reduce maintenance and rig
downtime.
U™ BOP
The U BOP is the most widely used ram-type BOP in the
world and offers the widest range of sizes of any Cameron
ram-type BOP.
UM™ BOP
U Blowout Preventer
The UM BOP is a lightweight BOP designed for easy
maintenance and long life. The UM complements the
existing line of U preventers and includes bonnets which
can be installed on any comparable size U BOP.
UM Blowout Preventer
Application Surface and subsea Surface and subsea Surface, subsea, snubbing (7-1/16" only)
Bore Sizes and 18-3/4" 5000, 10,000, 15,000 psi; 7-1/16", 11", 13-5/8" 3000–15,000 psi; 7-1/16" and 11" 3000–15,000 psi
Working Pressures 13-5/8" 10,000 psi 16-3/4" 3000–10,000 psi; 18-3/4" 10,000 psi;
20-3/4" 3000 psi; 21-1/4" 2000, 5000,
10,000 psi; 26-3/4" 3000 psi
Hydromechanical Lock RamLocks (5000, 10,000, 15,000 psi WP); Wedgelocks (with pressure balance chambers) Wedgelocks
ST Lock (10,000, 15,000 psi WP);
Wedgelocks (5000 psi WP)
Model 70 HC
Collet Connector Collet Connector
DWHC HCH4
Collet Connector Collet Connector
Available Working Pressures 2000 - 15,000 psi 5000 - 15,000 psi 15,000 psi 10,000 - 15,000 psi
Bending at 10,000 psi WP, 549,000 ft-lb 2,063,000 ft-lb 10,300,000 ft-lb 2,109,000 ft-lb
2,000,000 lb Tension
CONDUCTOR PIPE
T he Cameron motion compensation product line provides
a complete line of motion compensation products for a
variety of applications. Cameron’s integrated engineering
TENSIONER
The Conductor Pipe Tensioner
approach to deployment of drilling equipment, and the System is based on a 36" stroke
flexibility of single source engineering, adds up to saving cylinder, in a rod-end down, tension
time and money. type application. The system is available
in two configurations: hydraulic and gas
charged. The hydraulic system operates
ACTIVE DEPLOYMENT SYSTEM from the BOP closing unit using one of
The vertical design of this skid-mounted system maximizes the spare functions. The gas charged
available deck space with capacities available up to 370,000 system operates completely self-
lb gross capacity (320,000 lb). The sheave size is based on contained using locally generated
API recommendations to maximize wire rope life. Patented dry nitrogen. Once the cylinders
Space Saver™ technology eliminates APVs and uses an are charged to the proper gas
internal air/oil reservoir to save space. Active system pressure, they are isolated for operation
technology increases the weather and do not require external air pressure
Conductor
window, reduces risk of damage to vessels for continuous operation. Pipe
subsea equipment and uses a state- Tensioner
of-the-art hydraulic power unit for
operational efficiency. D E E P WAT E R R I S E R T E N S I O N E R
The Deepwater Riser Tensioner is designed
to allow modular upgrades for existing rigs.
It is efficiently designed to maximize variable
deck load capacity with capacities available
up to 370,000 lb, gross tensioning capacity
(320,000 lb). Left-hand and right-hand units
use the same parts to simplify maintenance.
The sheave size is based on API recommen-
Active Deployment System dations to maximize wire rope life. Cylinders
are interchangeable with the Deepwater
Motion Compensator.
Riser Recoil Control System The Riser
D E E P W AT E R M O T I O N C O M P E N S AT O R
Recoil Control System constantly monitors
The Deepwater Motion Compensator is designed to allow
the rod position and is designed to engage
modular upgrades for existing rigs. Its in-line design
if three systems report a rod speed of
maximizes variable deck load capacity, providing
greater than 2.5 ft/sec. The rod speed can
up to 900,000 lb, gross compensating
be managed if the wire breaks under low
capacity (800,000 lb). A single pin lock-bar
Recoil Riser tension. The riser recoil can be installed in
cartridge simplifies operation and Tensioner
place and requires no adjustment, only
maintenance and a single plate hook frame
initial commissioning.
reduces weight and maintenance. The
optional tool attachment allows multi-role
operations. The size is similar to existing
designs for easy retro-fit containing a true
hydraulic stroke-lock option. The design
integrates with the International Active
System, and the cylinders are interchange-
able with the Deepwater Riser Tensioner.
LOADKING ™
RISER SYSTEMS
The LoadKing family of riser connectors is designed to meet
the demands of ultra deepwater drilling in water depths of
7000 ft (2134 m) or more. LoadKing Riser Connectors are
available with tension ratings of 2.5 million lb through 4.0
million lb. LoadKing Riser Connectors incorporate many of
the features of the RF Riser Connector while holding the
weight of the riser joints to less than two percent heavier
than a comparably equipped RF Riser Joint.
Riser Joint
Termination
Spool
Flex Joint
Auxiliary Lines Up to Six Positions Up to Six Positions Up to Six Positions C/K Fixed
Fixed Fixed Interchangeable 2" to 5-1/2" OD
2" to 6-3/4" OD 2" to 6-3/4" OD 2" to 5-1/2" OD
Industry Specifications API 16R API 16R API 16R API 16R
Collet
Connector
BOP with
Shearing
Blind Rams
Collet
Connector
Wellhead
The ESG System allows the drilling rig to safely disconnect Complete Cameron ESG System
in an emergency situation.
D R I L L I N G C O N T R O L S Y S T E M S 17
Subsea Stack
SUBSEA SYSTEMS
The first 15,000 psi subsea Christmas tree and manifold.
SpoolTree, the industry standard. CameronDC, the world’s first
and only all-electric DC subsea control system. With more
than 40 years of subsea innovation, Cameron’s ability to
effectively design and project-manage subsea systems is critical
in delivering successful, reliable, and productive installations for
our customers. Our organizational infrastructure is designed to
provide complete systems comprised of nothing less than first-
rate components. With Cameron, the edge is system solutions.
T H E E D G E I S S Y S T E M S O L U T I O N S 21
A s the quest for subsea oil and gas reaches farther and
deeper, concerns about reliability, availability, and
maintainability are greater than ever. More than ever, Cameron
CAMERON OFFSHORE SYSTEMS
MANIFOLDS
As part of Cameron’s total subsea package offering, a variety
of manifold designs are available including template manifolds,
cluster manifolds, and pipeline end manifolds (PLEMs). To date,
Cameron has successfully installed manifolds in varying water
depths and in operating pressures up to and including 15,000 psi.
CONTROL SYSTEMS
The CAMTROL® Production Control System features an
integrated approach and component-level modularity to
provide unequaled advantages in uptime availability, flexi-
bility, and expandability. Integral to the system are compact
retrievable subsea control modules and a wide variety of
intervention options. Cameron has also introduced the
CameronDC Subsea Control System — the world’s first DC
powered subsea control system.
WELLHEAD SYSTEMS
Versatility describes the Cameron line of wellhead systems.
The popular STC™ and STM™ wellheads offer choices of 10,000
and 15,000 psi working pressures; metal-to-metal or metal
end-cap seals; five or six string programs; and a variety of
casing programs.
The Cameron MOSAIC product line incorporates field-proven components including: Cameron
SpoolTree Subsea Trees — proven over and over in field applications around the world. Subsea
Retrievable Insert Chokes — with a selection of actuator assemblies and trim cartridges. CAMTROL®
Production Control System — standard components which adapt to a variety of field configurations.
MOSAIC provides flexible modularity to create nearly endless system combinations with reliable
and economical subsea equipment. MOSAIC systems are all based upon a combination of standard
components. This modular, or building block approach, allows producers to specify pre-engineered
components with application specific features.
The Cameron MOSAIC solution for this field development is one of the myriad of combinations
available. Contact us and we will design one for you.
24 S P O O L T R E E P R O D U C T I O N S Y S T E M S
S P O O LT R E E ™ S U B S E A P R O D U C T I O N S Y S T E M
1 Guidebase For template or satellite installation. Guideline or guidelineless.
Variety of connection types available.
2 Valve Actuator 25 Compact Modular (CM) modules available. Sizes from 2" to 7". To
15,000 psi WP.
3 Internal Tree Cap With or without wireline plugs.
4 Tree Connector Mechanical or hydraulic. Deepwater high capacity (DWHC) model available.
5 Wellhead STM or STC wellhead. Metal-to-metal or metal end-cap seals. Five or six string
configuration. Variety of casing programs.
6 Spool Body and Modular Gate Valve Assembly Configured for various production
applications. Cameron FLS or FLS-R gate valves. Working pressures up to 15,000 psi.
7 Flowline and Pipeline Connection Vertical, horizontal, diver assist or
ROV. Common interfaces used throughout.
8 Tubing Hanger Up to six hydraulic and two electrical penetrations as
standard; optionally, more can be accomodated.
9 Subsea Choke Diver-assist or diverless. Inserts are retrievable or non-retrievable
(fixed). Crown or clamp connectors.
10 Control Module Up to 32 hydraulic control points. Variety of intervention
1 methods.
11 Debris Cap (not shown) Weight set or hydraulic SpoolTree Subsea
Production System
S P O O L T R E E S Y S T E M V A L V E A S S E M B LY
C O N F I G U R AT I O N S
In the Cameron SpoolTree design, the spool body provides
outlets to attach production, annulus and isolation valves
for downhole functions and the electrical penetrator bonnet
assembly. The tubing hanger landing shoulder is specially
ported to accept control stabs and provides hydraulic
continuity between the production control system and Basic Chemical Injection Annulus Crossover
downhole hydraulics.
The valves are contained both as an integral part of the
spool body, and in mini-blocks external to the vertical bore
of the tree. A typical valve cluster includes production and
annulus master valve, production and annulus wing valve,
crossover valve, workover valve and isolation valves for
SCSSV, CIV and other requirements. Assemblies are
available for 3" through 7" completions.
Production Choke Gas Lift Choke
D U A L B O R E P R O D U C T I O N S Y S T E M S 25
D U A L B O R E V A LV E A S S E M B LY
C O N F I G U R AT I O N S
The Modular Dual Bore Tree has a total of 320 pre-
determined master valve block assemblies. Valve assemblies
are available in 4", 5", or 6-3/8" nominal bore sizes with
5000, 10,000 or 15,000 psi WP ratings. Valve assemblies
feature Cameron FLS gate valves with one-piece gate, Production Production Gas Lift Production
with Choke with Two Chokes
spring-loaded seats and corrosion-resistant, metal-to-metal
seals for maximum sealing integrity.
A choice of 40 valve module arrangements is available
for each wing valve block, covering requirements for
production, water injection and gas lift. The modules offer
flexibility in location of crossover valve, chemical injection
valve, etc. Master and swab valves are located in the well
bore. Either commercial cartridge-type isolation needle Production Production with Production with
with Internal Internal Crossover Choke and Annulus
valves or Cameron heavy-duty isolation needle valves can Crossover and Choke Connection
be used for chemical injection and control line isolation.
26 C A M E R O N D C
CameronDC System
S U B S E A F L O W L I N E C O N N E C T O R S 27
The flowline is
complete, securely
connecting the
subsea tree to
the manifold.
The result is a
strong, mechanical
connection, leaving
no hydraulics
subsea.
CVC System
28 C A M E R O N P R O D U C T I O N C O N T R O L S Y S T E M S
S U R FA C E S YS T E M S
As the world’s largest provider of surface production
equipment, Cameron is uniquely equipped to give our
customers the edge: Leadership as the single-source supplier
for systems as well as products suitable for any operating
environment. Surface technologies like the innovative SpoolTree
wellhead and Christmas tree design. Global sales, service, and
manufacturing support. All of which help enhance productivity,
safety, and ultimately, profitability for you. With Cameron, the
edge is excellence.
T H E E D G E I S E X C E L L E N C E 31
C H O K E S A N D A C T U AT O R S
Cameron Willis surface production chokes and actuators are
used in Cameron surface systems to provide precise flow
control. Cameron Willis offers needle and seat chokes, MOVs
and control chokes along with a full line of choke actuators.
IC Conventional S Conventional
Wellhead System Wellhead System
Sizes 7-1/16" thru 11", 13-5/8" MTB, CMTB Sizes 7-1/16" through 20-3/4"
Working Pressures 5000, 10,000, 15,000 and 20,000 psi Working Pressures Up to 10,000 psi
Temperature Range -75˚ F to +350˚ F (-59˚ C to +177˚ C) Temperature Range -20˚ F to +250˚ F (-29˚ C to +121˚ C)
0˚ F to +350˚ F (-18˚ C to +177˚ C)
Side Outlets Studded
Side Outlets Line pipe threaded, studded
Top Connection API Flange/Studded or Clamp Hub
Top Connection FastLock or FlangeLock
Annulus Seals Metal to metal
Annulus Seals LS or Metal-End-Cap (MEC)
Tubing Hangers Metal to metal body and bore seals
Tubing Hangers Interchangeable single, dual and tensioned
34 C O M P A C T W E L L H E A D S Y S T E M S
M E TA L S E A L S P L I T C O M PA C T W E L L H E A D M B S ™ M U LT I - B O W L W E L L H E A D S Y S T E M
The Metal Seal Split Compact Wellhead is a metal sealing The MBS Multi-Bowl Wellhead System is a compact,
compact wellhead system. This metal sealing version is for unitized wellhead which can be used as an alternative to
the more critical service application, offering protection up conventional wellhead systems in onshore and platform
to 15,000 psi WP and accommodating high operation tem- applications. With the MBS Wellhead, the lower and
peratures. Using field proven metal-to-metal seals, this upper casing heads are installed as a single unit, saving
system includes a retrievable metal seal assembly on the installation time. In addition, the casing and tubing can
tubing hanger with external testing capabilities, an independ- be installed, landed and sealed through the BOP stack,
ent tubing hanger landing shoulder, and hydraulically set increasing safety and saving rig time normally required to
metal annulus seals with external testing capabilities. remove and reinstall the BOP stack during conventional
wellhead installations.
Description Metal Seal Split Compact Wellhead Description MBS Multi-Bowl Wellhead System
Temperature Range -20˚ F to +350˚ F (-29˚ C to +177˚ C) Temperature Range -20˚ F to +250˚ F (-29˚ C to +121˚ C)
Side Outlets Line pipe threaded, studded Side Outlets Line pipe threaded, studded
Annulus Seals JS, CANH Annulus Seals Energized with plastic packing or lockscrew
I
I
I
I
I
Temperature Range -20˚ F to +250˚ F (-29˚ C to +121˚ C) Temperature Range -20˚ F to +250˚ F (-29˚ C to +121˚ C)
0˚ F to +250˚ F (-18˚ C to +121˚ C) 0˚ F to +350˚ F (-18˚ C to +177˚ C)
Secondary Seals Single P, Single T, Double T, NX Bushing, Double P Top Connection Flanged, JB threaded
Annulus Seals LS or Metal-End-Cap (MEC) Tubing Hangers Interchangeable single, dual or tensioned
Tubing Hangers Single spool type Tubing Hanger Neck Seal SRL (straight radial lip)
36 S P E C I A L T Y W E L L H E A D S Y S T E M S
Bottom Connection Threaded, Slip-On Weld or CAMFORGE Secondary Seals Metal-End-Cap (MEC) or metal-to-metal
FLANGELOCK™ CONNECTOR
C ameron offers several connection systems which
feature reduced make-up time and increased safety.
The CAMFORGE and SlipLock systems are used primarily to
The FlangeLock Connector is designed as a low cost
connection for 5000 psi WP applications. It can be bolted
attach wellhead housings to surface casing. The FastLock, directly onto FastLock connector hubs. This allows for a
FlangeLock and FastClamp connections are fast make-up smaller, more cost-effective overall connection and provides
connectors used as end connections for wellhead spools, maximum flexibility for drilling and workover operations.
housings and BOPs.
FASTCLAMP™ CONNECTOR
SLIPLOCK ™
CONNECTOR SYSTEM The FastClamp Connector was developed as an alternative
The SlipLock Connector System uses a simple slip-type to the conventional clamp assemblies and fits standard
mechanism to replace conventional casing threads or clamp hub profiles using conventional API ring gaskets. The
slip-on preparations which require field welding. connector features reduced make-up torque, faster make-
up times and improved safety over conventional clamps.
FASTLOCK™ CONNECTOR
The FastLock Connector is designed as an efficient
replacement for flanged connections on surface wellheads.
Its low torque allows for fast make-up and saves rig time.
Typically, FastLock connectors would be installed on land
and platform BOP stacks taking full advantage of the
installation time savings offered by this unique design.
FlangeLock Connector
FastClamp Connector
FastLock Connector
Compatibility Fits reduced diameter Bolts directly to Fits all standard clamp S and IC wellheads,
proprietary hubs and FastLock hub hub profiles compact wellheads
standard API hubs
Seal Type CF, BX, RX CF Conventional API ring gaskets Elastomer (P seal) or metal-to-metal
(CANH™ seal)
Working Pressure Up to 15,000 psi Up to 6500 psi Up to 15,000 psi Up to 10,000 psi
38 W E L L H E A D C O N N E C T I O N S Y S T E M S
Description CAMFORGE
A D J U S TA B L E W E L L H E A D A N D
D rilling or production, surface or subsea, Cameron offers
a range of products to meet the requirements of spar,
TLP and other dry tree applications. The Cameron product
SURFACE TREE SYSTEM
Cameron offers custom built Adjustable Tension Tie-Back
line covers all critical components from the subsea wellhead Wellhead and Surface Tree Systems. The key features are
to the drilling/production system on the platform. In addition, reduced height, enhanced safety and rig-time savings with
Cameron offers a complete line of drilling, production and utilization of Cameron’s FastLock connector, and field
workover control systems as well as the industry’s most proven technology.
comprehensive suite of aftermarket services to meet the
needs of any application.
Adjustable Wellhead
System and Surface Tree
External Tie-Back
Connector
Adjustable Wellhead
System and Surface Tree
40 D R Y C O M P L E T I O N S Y S T E M S
A D J U S TA B L E S PA R A N D T L P S Y S T E M S
CASING HANGER Spar and TLP systems are designed for economical drilling
Cameron offers an and production in deepwater applications. Cameron’s
adjustable casing experience in deepwater drilling and production systems
hanger for use with dry provides a vast amount of expertise and proven
completion systems. performance for this demanding market.
The casing hanger
permits the main casing
load to be suspended
at the mudline of spar Drilling Production
and TLP systems. The tie- Mode Mode
back allows for length
adjustment in small
increments for accurate BOPs
Surface Wellhead
positioning and tension- and Tree
Adjustable Casing Hanger Tensioner
ing. The metal-to-metal System Buoyancy Units
CANH™ Seal is used in the adjustable casing hanger for
optimum reliability.
Wellhead
Connection
Subsea
Wellhead
Downward Facing
Riser Tensioning System Complete Spar System
A P I G A T E V A L V E S 41
6-3/8” 15,000 psi WP; 9” 10,000 psi WP; and 9” 15,000 psi
WP FLS-R Gate Valves
Large bore HP/HT tie-back wellhead and block valve with actuators Large bore wellhead and single stacked gate valves with actuators
42 A P I G A T E V A L V E S
F L ™, F L S ™ A N D F L S - R ™ G AT E V A LV E S
C ameron offers a full range of gate valves for surface and
subsea applications. Selection of a valve for a specific
application depends on a number of factors including bore
Slab-style gates are used in the Cameron FL, FLS
and FLS-R forged body gate valves for both
size and working pressure. manual and actuated applications. These valves
Standard and customized configurations of solid block meet or exceed the requirements of API
valves are available for use in Christmas tree applications, Specifications 6A, 6A SSV/USV and 17D. The
along with single gate slabstyle gate effects a metal-to-metal seal on the
valves. Solid block valves Slab Gate flow stream. In addition, slab-style gates may also
provide a more compact be used when wireline cutting is required.
design and improved fire- Common features of the FL, FLS and FLS-R Gate Valves
resistance with fewer include inert, spring-loaded, pressure-energized lip seals
potential leak paths. which are installed between each seat and body. These seals
However, single gate valve assist in low-pressure sealing and protect against intrusion
Christmas trees provide of particle contaminants into the body and seal areas.
flexibility in configuration The FLS-R valve is used in manually operated, large bore
and easy replacement. applications. The manual FLS-R valve shares many of the
The reliability of same features as the FLS valve and it incorporates a lower
Cameron gate valves balance stem and a unique ball screw mechanism which
makes them essential provide remarkably low operating torque. The FLS valve is
Platform Tree with Block Valve
components for both used in high pressure, large bore applications requiring
subsea and surface applications. Large bore and high actuation.
pressure valves are available for use in varying service • FL Gate Valves –
conditions including high sizes 2-1/6" to 4-1/16"; 2000 to 5000 psi WP
temperature applications, • FLS Gate Valves –
formation fracturing operations, sizes 1-13/16" to 9"; 2000 to 20,000 psi WP
drilling and subsea production
manifolds. • FLS-R Gate Valves –
All Cameron gate valves are sizes 4-1/16" to 11"; 5000 to 15,000 psi WP
available with a full range of
Cameron Willis actuators, M ™ G AT E VA LV E S
chokes and controls providing a Expanding-style gates are used in the Cameron
single source of supply. M cast body manual gate valves. The Pow-R-Seal®
Cameron offers both slab-style gate design provides a positive seal against the
and expanding-style gate valves upstream and downstream seats simultaneously
in full bore through conduit as the handwheel is tightened. This seal is unaf-
designs to meet API 6A fected by line pressure fluctuations and vibration.
requirements. Single Unit Valve Stacked Tree • M Gate Valves – sizes 2-1/16" to
Expanding
Gate 4 1/16"; 2000 to 5000 psi WP
Gate Valve Application Guide
11
9
FLS-R , FLS Actuated
7 1/16
6 3/8
5 1/8 FLS
Bore Size (in)
4 1/16
3 1/16
2 9/16
M, FL, FLS FLS
2 1/16
FLS
1 13/16
0
0 2,000 3,000 5,000 10,000 15,000 20,000
Working Pressure (psi)
M Gate Valve
A P I G A T E V A L V E S 43
Conductor Sharing Wellhead and Block Valve Platform Dual Block Valves
44 S A F - T - G A R D A C T U A T O R S
MP13
MA12
MP Series Pneumatic MA Series Pneumatic MHW Series Wireline MH70 NRS Single Piston
Piston Actuator Diaphragm Actuator Cutting Actuator Hydraulic Actuator
S U R F A C E S A F E T Y S Y S T E M S 45
3000 4000
2000
5000
1000 6000
0 psi
100
140
160
60
180
40 SSV
200 SURE
20 PRES
0 psi
In IN
SERV
ICE
Se PLOT
SURE
rvic PRES
ESOCLOS
TO
E
e
HAND
PULL PUMP
Ou D MODE
PILOT CTOR
ES
SELE
to PLOT
SURE
fS PRES
PLOT
SURE LY
ice REGU
HIGH
PILOT
LOW
PILOT
Surface Safety
System with Stand-
Mounted Controls
SCMS Self-Contained
Control System
Model ME Fail-Safe
Electric Actuator
Actuator
Supply
Source
MA16
CAMERON WILLIS
With a dedicated focus on the worldwide supply of Cameron
and Willis chokes and actuators, Cameron Willis brings
renowned brand reputation and legendary quality to our full
line of chokes for both surface and subsea applications.
Customers can also choose from a full line of actuators for
Cameron gate valves. Cameron Willis offers precision control
solutions for drilling and production service. With Cameron
Willis, the edge is technology.
T H E E D G E I S T E C H N O L O G Y 47
Surface Chokes
Cameron Willis supplies a full complement of choke systems Needle and Seat Chokes
to meet the requirements of even the most complex applications. H2 Classic Chokes 48
Cameron Willis choke products include needle and seat chokes, H2I Chokes 48
MOVs, control chokes, and a full range of Saf-T-Gard® actuators. MOVs 48
Control Chokes
N E E D L E A N D S E AT C H O K E S Plug and Cage Chokes 49
The Cameron H2 and H2I chokes are well-known for rugged External Sleeve Chokes 49
dependability in controlling flow in surface applications. These SLCA Actuators 49
Subsea Chokes
popular chokes are available in a wide range of sizes and in
Retrievable Insert Chokes
trims to meet the toughest environments.
Crown Connector Style 50
Clamp Connector Style 50
MOVs
Non-Retrievable Chokes
Cameron Willis Multiple Orifice Valves (MOVs) use precision
Fast Acting Modules 50
engineered rotating discs to control the flow in surface Actuators
wellhead, manifold, separator, letdown waterflood, CO2, RD250 Actuator 51
EOR and gas lift applications. SSLCA Actuator 51
Aqua-Torq Actuator 51
CONTROL CHOKES Remote Position Feedback 51
Cameron Willis Control Chokes are used worldwide to control Drilling Chokes
the flow of oil and gas in Christmas trees, line heaters, mani- Willis Drilling Choke 51
folds, water injection and gas lift applications. They can be Cameron Drilling Choke 51
supplied with plug and cage or external sleeve trims, and are
ideally suited for single- or multi-phase liquid and gas
production service. For subsea applications, options include P R O D U C T I O N C H O K E M O D E L A P P L I C AT I O N S
retrievable and non-retrievable inserts, and a Fast Acting H2, H2I MC-10, MC-20 M1A-M6 CC15-CC60 CC70-CC80
Module which ensures that an operator can safely close a
subsea choke within 30 seconds.
Surface • • • • •
Subsea • •
DRILLING CHOKES Needle and Seat •
Cameron Willis offers drilling chokes for use in applications Positive •
from 5000 to 20,000 psi WP. These rugged chokes are suitable Adjustable • • • • •
for drilling or well clean-up applications. MOV • •
G AT E VA LV E A C T U AT O R S
Plug and Cage • •
Cameron Willis Saf-T-Gard actuators are used on the full line
External Sleeve •
of Cameron gate valves in wellhead and pipeline applications.
Manual • • • • •
Actuator designs include pneumatic piston, diaphragm,
Actuated • • • •
hydraulic and electric operators. All can be supplied with
wireline cutting capability.
H2 CLASSIC™ AND M U LT I P L E O R I F I C E VA LV E S ( M O V s )
H 2 I ™ N E E D L E A N D S E AT C H O K E S The Cameron Willis MOV uses two matched discs, each
The H2 Classic Choke has an externally threaded body and with a pair of circular openings to create variable flow areas
is the standard for needle and seat chokes. The Cameron as one disc is rotated relative to the other.
H2I Choke has a recessed bean/seat design and an
externally threaded bonnet cap to ease maintenance.
Needle/Maximum Orifice Size H2 Classic: 1", 2", 3"; H2I: 1", 2"
External Sleeve
Control Choke
External Sleeve Control Chokes The External Sleeve Pneumatic Operating Pressure 100 psi, (80 psi min to 150 psi max),
110 ft/lb at 100 psi
Control Choke has a sleeve that throttles the flow on the
outside diameter of the ported cage. Numerous field Hydraulic Operating Pressure 1500 psi, (Optional – 3000, 5000 psi maximum)
applications have shown this trim to be the industry leader
Operating Temperatures Surface: –20˚ F to +150˚ F (–29˚ C to +66˚ C)
Subsea: 0˚ F to +150˚ F (–18˚ C to +66˚ C)
part of a retrievable
C ameron Willis offers two types of subsea control chokes,
non-retrievable and retrievable. The non-retrievable
choke is permanently attached to a subsea structure. The
manifold/module
assembly. Retrievable
retrievable chokes are designed so that the trim, actuator chokes feature a
and retention mechanism can be retrieved to the surface for retrievable insert and a
maintenance and upgrading. fixed choke body.
Cameron Willis designs and manufactures actuators for Both retrievable and
use with their line of subsea production control chokes. non-retrievable subsea
Three designs are available: the RD250 Gearbox, the Aqua- chokes are available with
Torq and SSLCA. plug and cage or external
Cameron Willis subsea chokes are used in production, sleeve trim packages.
water injection, gas injection and gas lift applications. Non- Retrievable chokes are
retrievable designs are used primarily in shallow water or as available with two types
of connections for
attaching the retrievable
insert to the choke body:
Crown Connectors and
Subsea Choke Running Tool Clamp Connectors.
Crown Connector Detail Clamp Connector Detail Materials: API ratings AA through HH
R D 2 5 0 G E A R B O X A C T U AT O R AQUA-TORQ™
The RD250 Gearbox actuator was developed for diver or A C T U AT O R
ROV operation. In this design, the gearbox is oil-filled and The Cameron Willis Aqua-
pressure-compensated. An external, local position indicator Torq Actuator is a compact
on the case allows precise choke settings to be easily read. and field-proven hydraulic
actuator which provides
actuation in precise incre-
mental steps from open to
closed. It is suitable for
mineral oil and water-based
control fluids.
The Aqua-Torq Actuator
is oil-filled and pressure- Aqua-Torq Subsea Actuator
compensated and has been
endurance tested to a minimum of 1 million actuation pulses
and hyperbaric tested to 11,400 ft (3474 m). It incorporates
Subsea Stepping a local, external position indicator and is available with an
Linear Choke Actuator internal LVDT remote position transmitter.
DRILLING CHOKES
Cameron Willis offers two
styles of drilling chokes.
These chokes are suitable
for drilling or well clean-up
applications. They have high flow
capacities with large trim openings
to pass well debris. Both chokes have
trim that can be replaced without
removing the choke from the
manifold.
Trim Styles Disc MOV (Willis), Gate and Seat (Cameron) Cameron
Hydraulic Drilling Choke
Performance Verification API 16C
Western Hemisphere
Cameron
PO Box 1212
Houston Texas 77251-1212
USA
Tel 1-713-939-2211
Fax 1-713-939-2620
e-mail subsea@camerondiv.com
www.camerondiv.com
Eastern Hemisphere
Cooper Cameron (U.K.) Ltd.
5 Mondial Way
Harlington
Hayes UB3 5AR
England
Tel 44-208-990-1800
Fax 44-208-990-1888
e-mail subsea@camerondiv.com
www.camerondiv.com
A Annular BOP, Aqua-Torq, CAMCHEC, CameronDC, CAMFORGE, CAMLAST, CAMRAM, CAMRAM 350, CAMSERV, CAMULAR, CANH,
CSW, CVC, DL Annular BOP, DUROCAM, DWHC, ESG, FASTCLAMP, FASTLOCK, FL Gate Valve, FLANGELOCK, FlexPacker, FlexPacker NR,
FLS Gate Valve, FLS-R Gate Valve, H2 Classic, H2I, HC, HCH4, IC Conventional Wellhead, LoadKing, M Gate Valve, MBS, McPac, Model
70, MoRPH, RF Riser, S Conventional Wellhead, SLCA, SLIPLOCK, Space Saver, SpoolTree, SSLCA, SSMC, STC, STM, TL BOP,
U BOP, UM BOP and VBR-II are trademarks of the Cooper Cameron Corporation, Cameron Division
Cameron, CAMTROL, MOSAIC, Saf-T-Seal, and Willis are registered trademarks of the Cooper Cameron Corporation, Cameron Division.
© Cooper Cameron Corporation, Cameron Division, Printed in USA, 1/05, SP/10M, TC1784