Professional Documents
Culture Documents
40
SLH-S assemblies can be
Free area
used on their own or may be
The face core area provides
combined with SLH schemes
approximately 53% free area.
(for instance, where non
active louvres are required to
Stiffener bars
be blanked off).
Rear mounted stiffener bars Blade
SLH-S blades can be fitted are fitted as standard to all support
clip
into doors to provide louvres over 1.5m in width.
matching appearance with
Stiffener bars do not interrupt
louvre assemblies.
the external continuous line
appearance of louvre blades.
Specification Louvre blades are secured to
stiffener bars via aluminium
Materials
support clips.
Extruded aluminium grade
ENAW 6063T6 to
Coupling
BSEN 755 -1 and -9.
Can be coupled vertically or
horizontally to form large
Blades
areas of louvre. Continuous
1.7mm extruded aluminium.
line is standard.
Corner frames
Frame types
Screw or welded joints
A or AC frames are available
depending on size and
(and may be combined if
construction.
required, eg A head, AC cill)
together with AC channel
Finishes
frame for glazing applications
50
25, 28, 32mm Glazing Frame Jamb ‘A’ Frame Jamb ‘AC’ Frame Jamb 25, 28, 32mm Glazing Frame
12
External Metal Louvres
25.4mm
blanking panels.
23.3mm
Finishes
Mill.
19.1mm
80mm 51mm
naco 13
External Metal Louvres
Core Airflow Free Area Effectiveness Class Core Airflow Free Area Effectiveness Class
Velocity m3/min Velocity Ratio Velocity m3/min Velocity Ratio
m/s m/sec m/s m/sec
0 0 0 99.9 A 0 0 0 99.9 A
0.7 1421 383 99.9 A 0.6 1228 292 99.8 A
1.0 2120 505 99.9 A 0.9 2001 476 99.4 A
1.4 3068 730 99.9 A 1.5 3181 757 99.3 A
1.9 4031 960 99.9 A 2.0 4285 1020 97.8 B
2.4 5077 1209 99.3 A 2.5 5315 1265 96.2 B
3.0 6277 1495 97.1 B 2.9 6114 1456 95.4 B
3.5 7373 1755 96.1 B 3.5 7442 1772 90.9 C
Notes:
1. Core area is the open area of the louvre face (face area less
louvre frames). Core Velocity is the airflow velocity through the
core area of the louvre (1m x 1m). Pressure Drop
2. Free area of test size is calculated per AMCA standard 500-L. Pressure Drop testing performed on
1219 x 121mm unit.
3. Wind Driven Rain Penetration Classes:
Class Effectiveness
A 1 to .99 248.9
224.01
1.00
.90
B 0.989 to 0.95 199.12
174.23
.80
.70
C 0.949 to 0.80 149.34 .60
124.45 .50
D Below 0.8
99.56 .40
5. The AMCA Wind Driven Rain Test is performed in a laboratory 2.49 .01
environment and incorporates controlled wind, water and system
2134
2438
2743
1219
1524
1829
610
924
122
152
183
30
61
91
14
External Metal Louvres
Bracket
by
Others
naco 15
External Metal Louvres
Maximum
Height
2500mm
Ship Section
DB50 Louvre
Maximum Single Width
1500mm
Coupling
Can be coupled vertically or horizontally to
form large areas of louvre.
16