Professional Documents
Culture Documents
Title of Activity / Work: Carpentry / wood work Doc. Rev. Date 13-Jul-16
Compliance? Yes /
Sl. No. Subactivity / Steps Hazard Effect Control Measures Responsibility No Remarks
3 Use of circular saw, wood drill Rotating parts, Caught in-between Entanglement, Caught in- 1) Take required work permit(s). Execution Engineer & Job
between may cause severe 2) Only trained carpentor to operate the machine. Supervisor; HSE
injury, disability or fatality -Monitoring & Training
Caught in-between 3) Keep away fingers from rotating parts and entangling hazards. Loose clothing
shall be strictly prohibited near rotating machinery. Ensure for proper guarding
of rotating parts.
1 of 3
Compliance? Yes /
Sl. No. Subactivity / Steps Hazard Effect Control Measures Responsibility No Remarks
5 Carpentry / wood work Sharp edges / projecting parts / corners Contact with sharp object 1) Take required work permit(s). Execution Engineer & Job
may cause severe puncture 2) Use hand gloves. Supervisor; HSE
injury -Monitoring & Training
3) Provide packing materials on Sharp edges / projecting parts / corners
4) Use Mandatory PPE- Safety Shoes/Gum boot with steel toe, Safety Helmet.
Wet. slippery or oily hand / tool /safety hand Hit or Struck by object (tool), 1) Take required work permit(s).
glove; may cause severe injury. 2) Ensure tools , material, hands and or safety hand gloves are free of grease and
Electric shock may cause oil before starting work.
severe burn.
3) Ensure tools , hands, material, and or safety hand gloves are not wet.
4) Avoid use of damage PPEs.
Noise Prolonged exposure for may 1) Take required work permit(s).
years can permanent / partial 2) As possible isolate the carpentery machines/tools operation from other
hearing loss and operation.
psychological imbalance ;
severe discomfort
3) Inspection of carpentery machines/tools.
4) Preventive maintenance of carpentery machines/tools..
5)Ear protection must be worn by persons exposed to noise hazard at site.
Monitor noise as per BOCW Rules / Factories Rules.
2 of 3
Compliance? Yes /
Sl. No. Subactivity / Steps Hazard Effect Control Measures Responsibility No Remarks
Note:
Note: This is standard JSA prepared based on general hazards. Site has to review this JSA & Update considering process involved, site & work location condition, equipments/machines/ tools use, people involved and activities near by job location.
3 of 3