Professional Documents
Culture Documents
appearance;
After receiving the goods, please open the box and check box items are consistent with the
packing list immediately if any parts are missing, please contact the service personnel.
Empty pin3
Empty pin4
2 Operating Instructions
BOSCH、DENSO、DELPHI、CAT-L、CAT-H、PIZEO
VL、VE、LL、TL
T :0-2000 times
5、injection signs: icon display indicates the beginning of the injector fuel injection;
8、the count flag: Icon display indicates the injector start counting;
On / Off Injector;
CRI201 High pressure common rail injector tester user manual V1.0
When the number is 0, the injector has been working, do not stop;
(BOSCH、DENSO、DELPHI、CAT-L、CAT-H、PIZEO)
B., long press the MODE button to switch between test patterns and resistance injector test mode;
C,After entering the resistance test mode, connect the injector first, and press the ON/OFF button
once. After 2 seconds, the resistance of the injector will be displayed on the screen. The unit is
milliohm.
If it is found that the measured resistance deviates greatly from the actual resistance, it should be
calibrated.
Calibration method: In the resistance measurement interface, directly short-circuit the two clips of
the injector, and then short-press the “Counte” key. A “#” symbol will appear at the upper right of
Short press down to select the setting of the project, there is a corresponding position cursor display,
divided into: Injector brand choice / count value / width / frequency, cycle through the four setting
Rotate Left or Rotate Right, modify the current value of the item.
2、 Due to the non-normal use, causing damage to the product, the user bear the maintenance
costs;
3、 The product life-long maintenance, a year later, users bear the maintenance costs.