Professional Documents
Culture Documents
AccuRay D5
PRODUCT
DATA AccuRay D5
GENERAL
The DK’S AccuRay D5 is a high-performance X-ray High voltage generator. It has greatly improved operability
and safety with the use of computers and provides a low-ripple output with high X-ray quantum efficiency
through a high-frequency inverter system.
FEATURES
(1) Inverter system
Microprocessor-controlled, high frequency inverter system creates very low ripple kV waveform with
high X-ray quantum efficiency, which reduced unwanted X-ray
LED display digital read-out is convenient to operate the system in a dark operation room.
OPTIONAL ITEMS
Ø AEC
SPECIFICATIONS
(1) Selectable techniques
Standard
General radiography
Bucky radiography
Model AccuRay D5
Number of X-ray Tube 1
Number of Receptors 2 receptors(Stand/Table)
Model E7239X
125kV / 320mA
Short time Rating
80kV / 500mA
When 2-control(kV, mAs) setting is selected, possible shorted exposure time and maximum tube
current are automatically set according to the allowable X-ray tube load.
When 3-control(kV, mA, sec) setting is selected, each factor is set independently by manual
operation.
Each exposure factor is displayed in LED digital read-out and it can be adjusted by intuitive
switches very quicky as below:
- Up/Down –
Max. 672 programs (7 techniques X 32 programs X 3 patient size) can be defined by users.
Intensifying screen sensitivity is selectable from L(low), M(middle) and H(high sensitivity)
(9) Indicator
LED indicator signs system status for “Ready”, “Exposure”, “Stand-by”, “Check” and “Error”
Once system detects error, error code message is automatically displayed on the LED main display and
FL sub-display.
PRODUCT
DATA AccuRay D5
Auto Exposure Control (option)
POWER REQUIREMENTS
System : Single Phase AC 220V
Frequency : 50 or 60Hz
Model AccuRay D5
Standard Voltage and 220V ±10%, 0.8Ω or less
allowable voltage range at no
load
Switch at hand Type Knife switch and fuse or
molded case circuit breaker
Capacity 100A or more
AMBIENT CONDITION
In case room environment dose not satisfy the following conditions, it is suggested to install split
air conditioner.
Weight : 3kg
Weight : 84kg
Remarks
Every value in this Product Data Sheet is a standard value, and it may vary a little from the actual at each site
The appearances and specifications are subject to change for reasons of improvement without notice.
Certain configurations may not be available pending regulatory clearance. Contact your DK Medical system representative for
information on specific configurations.
http://www.dk.co.kr