Professional Documents
Culture Documents
Page 1 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 2 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Motorized control (form console and gantry) of table movements in horizontal and vertical
axis.
Scan with at least 0.25 mm accuracy/ reproducibility on a 200 kg patient.
CONSOLE COMPUTER:
System architecture and operating system must be based on latest technologies.
Multi-tasking and parallel processing CPU system, 64bit CPU, 2.2GHz or better.
At least 2TB of storage space or more for 500,000 or more image storage or as per
manufacturer..
Ram: 32 GB or more
Real time spiral/helical reconstruction of 20-images per second with iterative dose
reduction applied.
Medical Grade Console monitor color 21” or more LCD/LED screen with 1920x1200
resolution or better.
Iterative dose reduction technology.
DVD / CDR.
CT control box and console table.
512x512 / 1024x1024 image reconstruction matrix or better.
Page 3 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
DICOM 3.0:
Complete Dicom-3 solution for send, receive, archive, retrieve and print etc. or better.
ACCESSORIES:
200KVA Generator (Optional)
DICOM compatibility dry laser imager for film size 14” x 17” including 500 films.
160KVA online sine wave ups for whole system with a minimum backup of 20 minutes on
full load or equivalent
Dual head programmable, power injector with flow/volume control for both head
independently, mounted on mobile base or ceiling suspended or equivalent.
Standard set of phantoms for calibration of ct.
Table accessories: table pad, arm rest, patient restraint kit, IV pole, infant cradle, flat head
holder, head side pad, u-shaped head pad, head support for coronal scanning, knee cushion.
Accessory rack or cabinet.
Integrated patient vital sign monitor for ECG gated scanning. Should have provision of
displaying ECG signal on display of gantry and on console computer.
INSTALLATION:
Complete Installation of CT.
Lead lining of the CT room (where required) will be done by the vendor who will be
responsible for complete interference free installation from its surroundings to ensure
artifact free examination.
Lead glass for control room 2x3 feet 0.5 mm PB. Equivalent
NOTE:
The system should be FDA/CE/JIS/MHLW or equivalent approved. 02 certificates
mandatory.
05 years with parts and services comprehensive warranty.
Site preparation will be done by the selected bidder.
Life span of the quoted model should be clearly defined by the manufacturer.
Technical training as well as operational training must be provided by the supplier
in case if required.
Service manual as well as operational manual must be provided along with the
machine.
PNRA Registration will be responsibility of the supplier.
Page 4 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 5 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 6 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 7 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Live strain rate Elastography with quantification for body organs specially breast to
visualize lesions.
Live Shear wave Elastography with quantification for liver with convex & linear probes to
visualize tissue stiffness by generating images through shear wave propagation, speed, and
elasticity modes.
Measurement Package:
To provide comprehensive software package for measurement of distance circumference,
area, time, depth etc.
System Complete with Following Facilities and Accessories:
21-Inches or better color monitor
Standard Probes:
2.0 – 5.0 MHz or More Multi-Frequency Convex Probe
4.0 – 10 MHz or More Multi-Frequency Linear Probe
4.0 – 10 MHz or More Multi-Frequency TVS Probe
5 – 15 MHz High Frequency Linear
STD Recording Devices:
Built-In CD/DVD Recorder for Digital Image Storage
Built-In / Separate Compatible Imported Online Ups (Minimum Backup Time > 10Minutes)
B/W Thermal Printer. (Model/ Make must be mentioned)
3KVA Online UPS (Optional)
NOTE:
Probes frequency may vary from manufacturer to manufacturer but shall not down
grade the specs nor effect patient care.
The system should be FDA/CE/JIS/MHLW. 02 certificates mandatory.
03 years with parts, probes was added and services comprehensive warranty..
Life span of the quoted model should be clearly defined by the manufacturer.
Technical training as well as operational training must be provided by the supplier
in case if required.
Service manual as well as operational manual must be provided along with the
machine.
Page 8 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
2. X-RAY TUBE
Rotating anode X-ray tube
Anode heat storage capacity 140kHU or better
Focal spot: dual focus 0.6 mm/1.2 mm or better
Tube Voltage: 40~ 150kV or better
Inherent filtration: 0.9mmAl or better
4. Movements
Tube assembly vertical plane rotation angle: -90°~90° or better
Page 9 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
5. BATTERY BACKUP
Battery backup of 100 exposures and can drive 50 KM was changed to 5Km routine
usage when fully charged.
Charging time: 3.5h or better
The sensor in the front to automatically stops the device if a slight pressure is detected
Dual way braking
Unit movement driven by power or manual
6. ACQUISITION WORKSTATION
Workstation as per manufacturer
CD/DVD R/W
Image acquisition workstation monitor: LCD Screen size: 17 inch or better
Image processing system meets the DICOM 3.0 achieving management over patients and
images.
NOTE:
The system should be FDA/CE/JIS/MHLW or equivalent approved. 01 certificate
mandatory
03 years with parts and services comprehensive warranty.
Life span of the quoted model should be clearly defined by the manufacturer.
Technical training as well as operational training must be provided by the supplier in
case if required.
Service manual as well as operational manual must be provided along with the machine.
PNRA Registration is the responsibility of supplier.
Page 10 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
TECHNICAL SPECIFICATIONS
A fully digital flat panel single plane IR Angiography system, dedicated for diagnostic &
interventional Radiology examinations. Head to toe patient coverage without patient re-
positioning should be possible. The Angiography system should comprise of the
following Configuration:
POSITIONING ARM:
STAND:
Ceiling mounted stand with manual / motorized movements, providing free access to
patient table from all 3x sides
Real time display of rotation angulations.
Geometry: C-arm / G-arm
C arm depth of 86cm or more
RAO / LAO +/- 120 ° or more
C-arm permits 90° cranial and 90° caudal angulation of the imaging system
3D Rotational angiography with a speed of up to 50°/sec or more. It should be possible
to achieve rotational scan with C-arm positioned at head end or nurse end as per user
preference and clinical requirement
Isocentric Height: Variable / Fixed. Variable / Fixed. Focus spot to iso-center should be
75 cm or more
Auto Positioning: Programmable auto positioning of selected angulations. (50 or more
programmable positions.). Ability to recall stand position by reference image should be
possible.
The control panel can be mounted at any side of the patient table.
All the rotational / angles should be available and digitally displayed in the control and
examination room.
Motorized / manual parking of the positioning arm should be possible
DIGITAL FLAT PANEL:
Image matrix of 2480 x 1920 x 16 bits or more. Systems with higher matrix will be
preferred
30 x 40cm or more sized detector with five formats or more
Built in temperature stabilizer preferably without chiller
Digital flat panel detector with pixel pitch of 160 micron or less and DQE of 75% at 0
lp/mm
Integrated no touch collision protection feature or as per manufacturer.
All other standard accessories according to this digital flat panel.
Removable Antiscatter grid for lowering dose to infants & paeds
Page 11 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 12 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
MONITORS:
Flat Screen 19” TFT of 1024 x 1024 matrix supplied in control room.
Monitors should be ceiling mounted in the operation room.
One 54" or better 8MP medical grade monitor with integrated tableside control in touch
panel in operation room also the screen should have at-least 6 different layout to
incorporate all applications. (must be from the same OEM)
All black & white monitors will be of Medical Grade, complied with international
standards for medical monitors.
CONTROLS:
All controls of digital imaging system, incl. Post Processing & Quantification analysis shall
be in the control room while replay / display of reference image should be available in
the examination room. Wireless remote control for playback and processing functions in
the examination room. Table side control through touch panel at the table side should be
available.
Table side controls are essential. Controls should be manageable from both sides of the
table. Wireless foot paddle should be offered as standard having at least 3 paddles (user
configurable), based on battery with minimum duration of 7 days/charge
RECORDING / ARCHIVING & COMMUNICATION SYSTEM:
Recording / archiving system should be DICOM-3 compatible.
DICOM (send/storage, commitment, retrieve/query)
Ethernet connection to connect with other terminals.
Integrated Intercom system.
DICOM-3 Compatible.
Edge enhancement, adjustable view speeds & post processing, Offline QVA
Quantifications on Workstation should be offered as standard
High resolution 19” TFT Monitor.
CD/DVD writer and CD/DVD ROM drive.
The bidders should quote their own licensed software.
SOFTWARE / HARDWARE PACKAGES:
Standard Quantification packages vascular quantitative analysis including vessel
analysis, vessel size and stenosis assessment
Automatic loop replay after acquisition or fluoroscopy
Rotational angiography software 3D visualization of vascular
pathologies from a single rotational angiographic X-ray acquisition
CT-like imaging to visualize bone, soft tissue, and vessels
Automatic loop replay after acquisition or fluoroscopy.
Dynamic real time pan / zoom.
DSA
Dual Phase acquisition and Dual View functionality which should allow simultaneous
visualization of two 3D data sets. The System should have Open Trajectory feature helps
visualize the peripheral part of the liver, while the 3D imaging technology should allow
for simultaneous multiple lesion segmentation.
All controls of digital imaging system incl. Post-processing & Quantification shall be in
the examination as well as control room.
Single axis rotation
All the advance clinical packages offered by the vendor should be from the OEM of the
Page 13 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
angio system
Software with ablation feature provides a comprehensive solution for treatment
planning and live needle guidance during interventional
ablation procedures.
The workflow-based tool to guide detection and treatment of tumors and feeder vessels
to multiple lesions. Based on a segmented 3D volume, the software should automatically
analysis the vasculature of lesions and provides suggestions about feeder vessels to the
segmented lesions. having facility of EP Studies and also integration with IVUS, iFFR and
FFR must be provided
RADIATION PROTECTION:
Ceiling suspended tilt able lead glass for radiation protection of operators head / neck
regions.
Collision tolerant.
Lower body radiation protection flaps.
PHYSIOLOGICAL HAEMODYNAMIC MONITORING SYSTEM:
should be for paeds and adults having control on same touch screen which also controls
all other functionality
Multichannel to record at least 2 channels IBP, Cardiac output with thermo dilution
method, Surface ECG in any configuration and simultaneous 12 lead ECG, NIBP and SpO2
measurement.
Digital display of all the parameters like IBP, Heart rate, cardiac output parameter.
It should be possible to store the waveforms on the hard disk of the physiological
recording system.
The hemodynamic monitoring system should include following accessories :
2x invasive blood pressure reusable transducer.
Reusable interface for 12 lead ECG (2 Nos)
NIBP cuffs (02 Nos)
Holder for mounting the IBP transducer alongside the patient table.
Upgradable to EP System.
Angio Compatible UPS with standard backup time of 20 mints was changed to 160mins.
200KVA Generator to be quoted as optional.
ACCESSORIES:
Online UPS of 160KVA
Single head Power Injector with disposable syringes 500
Wall mounted / trolley mounted hangers for lead aprons
Thyroid Collars with gonadal shields 10 x
Lead glass 5 x 2 ft
Knee pads
Complete building/civil work for state of the art Angio suite including storage aluminum
racks, aluminum doors with elbow action controls, paneling, lead lining , flooring , paints
etc.
Oxygen and suction system connection with the existing hospital pipeline.
Split air conditioner units for whole suite.
Complete electricity works from power station to Anglo room including earthling, power
Racks, breakers, DB etc. Lead lining of walls, windows and doors complete full length
NOTE:
Page 14 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 15 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
TECHNICAL SPECIFICATIONS
System must have 300, 000 or more Digital Processing Channels
Integrated Data Management System having 500 GB or more Hard Disk Drive for still and
cine Clips storage
Should have System Capacity of 1.5-16 MHz or More
Must have 4 Active Probe Connectors
Should have Tissue Harmonic Imaging
Should have Maximum Viewing Depth of 35 cm or more
Must have Frame Rate 1000 FPS or more
Should have Pre and Post Processing option with Raw Data Storage
Must have user-defined programmable keys for custom selection by the User
Sweep Speed: Slow, Medium, Fast
Should have Full Screen Zoom Capability
Must have 10" or more angle adjustable secondary Touch Screen for easy operation of the
system
System Dynamic Range: 200 dB or More
Must have 5 or more USB 3.0 Ports
Must have VGA and HDMI Port to connect system with Multi-Media/ Projector
Color Doppler
Colorized Spectrum Display
Tissue Harmonic Imaging with 3 or more harmonic frequencies
2D Image with Color Flow
Power Doppler/ Directional Power Doppler Imaging
Auto Image Optimization/quick scan for single button optimization of all scanning
parameters
Including 8-Segment STC/ TGC plus overall gain
Sonoct/compound/aplipure imaging for both frequency compounding and spatial
compounding in B/W and color Doppler
Wide View/Trapzoid Imaging for Linear Probe
Doppler Sensitive Imaging for Low Flow Velocity Vessels SMI/ B-Flow/ HR Flow or
equivalent
Auto IMT calculation in Carotid with Linear Probe
Adaptive Suppression imaging/precision imaging to enhance b-mode imaging detailed in
layers and boundaries and sharpened outlines of the lesions and reduces cluttering
Doppler Beam Steering and Bi-Directional Stereo Audio
Page 16 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
NOTE:
The system should be FDA/CE/JIS/MHLW approved 02 certificates are required
mandatory.
03 years with parts and services comprehensive warranty.
Life span of the quoted model should be clearly defined by the manufacturer.
Technical training as well as operational training must be provided by the supplier in
case if required.
Service manual as well as operational manual must be provided along with the
machine.
PPM Schedule should be share with Biomedical Engineering Department along with
the supply of equipment, which will include calibration and validation of the
equipment.
Page 17 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 18 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 19 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
steam and chemicals used to sterilize Operation Theater complying with the requirements
of norm as per manufacturer.
Material ‐ Stainless Steel / thickness of metal sheet of min. 8 mm or better.
Finish: Powder Coated in any RAL Color with antimicrobial protection.
Joints ‐ The wall panels are fixed on the sub‐structure leaving 4-6mm intermediate space
between the panels and is filled / covered by removable hermetic silicon seal / gasket. The
removable silicon seal is resistant to UV, detergents, bactericidal products, water, steam and
chemicals used to sterilize Operation Theater.
Corners ‐ Wall to wall and wall to ceiling connections are coved/diagonal made of stainless
steel sheet powder coated finishing like the wall panels and smoothly integrated with the
wall panels on the sub‐structure assembled similar like wall panels with screws covered with
removable silicone gasket.
Sub‐Structure Profiles ‐ Floor rails are made of galvanized steel sheet of appropriate
thickness with base height 80-100mm fastened with screws and dowels over leveled screed.
The sectional supports are suitable to support to the wall panels, profile length shall be
adjusted on site according to the available height. U‐profiles are used for connection to wall
panels and existing building walls.
The sub‐structure is fastened with concrete elements of the building.
Page 20 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 21 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
lighting diffusion with high uniformity. The diffuser is UV-protected for a better resistance to
weathering.
Suspended light system to smoothly integrate with modular and plaster‐board
suspended ceilings,
Luminary body made with steel sheet and powder coated in white.
Aluminum free frame.
Hermetic sealed body to prevent foreign bodies when closed
Resistant to disinfectants and UV radiation with white-coated steel frame
Lamp: LED
Power: 50W
Protection Class: IP65
Dimension: 600X600mm
RGB light source to be quoted as optional.
5 DOOR SYSTEMS
a AUTOMATIC SINGLE WING SLIDING DOOR FOR OPERATION THEATER | As Per Each
Site Requirement
Door Wing – Single wing of thickness 40mm with 1.5mm Stainless Steel AISI 304 brushed
finish or powder coated outer skin fully closed construction. Door acoustically and thermally
isolated with highly pressured polyurethane foam of density 50 kg/m3 additionally
strengthening construction of the door wing with silicone gaskets.
Handles – Stainless Steel “C” or as per manufacturer shaped long handles from external side
and recessed type handle from the inner side of the door wing of the door wing.
Door Frame – made of 1.5mm thick Stainless Steel sheet AISI 304 brushed finished or power
coated in any RAL colour. Fabricated in two (2) parts internal and external to smoothly
integrate with the masonry wall and modular wall system.
Inspection Window – 400 x 600 mm double glazed (safety glass) with electronic privacy
having control button provided near the door accessible from inside of the OT.
Safety Sensor – 2 set of photocells in door frame along with infrared sensor at door drive
level on inner and outer side of the door.
Activators – Rubber hit switch/touchless on both sides of the door frame for full opening of
the door. For touchless operation proximity sensors are installed on both side of the door can
be programmed for partial / full opening of the door. Stainless Steel Elevator switch with LED
light Symbol provided inside and outside of the door frame for full open, partial open and
constant opening during cleaning and maintenance. Programmatic switch with key will be
provided on the door drive cover for program selection.
Automatic door Drive –slide away system or any renowned brand as per the
manufacturer’s selection, capable for controlling for full opening, reduced / partial opening,
locking, one‐way, fire alarm integration with battery back‐up module. In case of power
failure the battery back‐up will operate the door however the door can be manually
operated.
Drive Cover – Stainless Steel AISI 304 brushed finished or powder coated in any RAL color.
Door Dimension – 1500 X 2100 MM OR As Per Site Requirements
b AUTOMATIC DOUBLE WING SLIDING DOOR FOR CORRIDOR | As Per Site Each
Requirement
Door Wing –Double wing of thickness 40mm with 1.5mm Stainless Steel AISI 304 brushed
finish or powder coated outer skin fully closed construction. Door acoustically and thermally
isolated with highly pressured polyurethane foam of density 50 kg/m3 additionally
strengthening construction of the door wing with silicone gaskets.
Page 22 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Handles – Stainless Steel “C” shaped long handles from external side and recessed type
handle from the inner side of the door wing of the door wing.
Door Frame – made of 1.5mm thick Stainless Steel sheet AISI 304 brushed finished or power
coated in any RAL colour. Fabricated in two (2) parts internal and external to smoothly
integrate with the masonry wall and modular wall system.
Inspection Window – 400 x 600 mm double glazed (safety glass) with electronic privacy
having control button provided near the door accessible from inside of the OT.
Safety Sensor – 2 set of photocells in door frame along with infrared sensor at door drive
level on inner and outer side of the door.
Activators – Rubber hit switch/touchless on both sides of the door frame for full opening of
the door. For touchless operation proximity sensors are installed on both side of the door can
be programmed for partial / full opening of the door. Stainless Steel Elevator switch with LED
light Symbol provided inside and outside of the door frame for full open, partial open and
constant opening during cleaning and maintenance. Programmatic switch with key will be
provided on the door drive cover for program selection.
Automatic door Drive BEAM UNSLIDE–slide away system or any renowned brand as per
the manufacturer’s selection, capable for controlling for full opening, reduced / partial
opening, locking, one‐way, fire alarm integration with battery back‐up module. In case of
power failure the battery back‐up will operate the door however the door can be manually
operated.
Drive Cover – Stainless Steel AISI 304 brushed finished or powder coated in any RAL color.
Door Dimension – As Per Site Requirements
c AUTOMATIC SINGLE LEAF HINGED DOOR FOR DIRTY CORRIDOR| As Per Site
Requirement Each
Door Wing – Single wing of thickness 40mm with 1.5mm Stainless Steel AISI 304 brushed
finish or powder coated outer skin fully closed construction. Door acoustically and thermally
isolated with highly pressured polyurethane foam of density 50 kg/m3 additionally
strengthening construction of the door wing with silicone gaskets.
Handles – Stainless Steel “C” shaped long handles from external side and recessed type
handle from the inner side of the door wing of the door wing.
Door Frame – made of 1.5mm thick Stainless Steel sheet AISI 304 brushed finished or power
coated in any RAL colour. Fabricated in two (2) parts internal and external to smoothly
integrate with the masonry wall and modular wall system.
Inspection Window – 400 x 600 mm double glazed (safety glass) with electronic privacy
having control button provided near the door accessible from inside of the OT.
Safety Sensor – 2 set of photocells in door frame along with infrared sensor at door drive
level on inner and outer side of the door.
Activators – Rubber hit switch on both sides of the door frame for full opening of the door.
For touchless operation proximity sensors are installed on both side of the door can be
programmed for partial / full opening of the door. Stainless Steel Elevator switch with LED
light Symbol provided inside and outside of the door frame for full open, partial open and
constant opening during cleaning and maintenance. Programmatic switch with key will be
provided on the door drive cover for program selection.
Automatic door Drive – BESAM UNISLIDE slide away system or any renowned brand as per
the manufacturer’s selection, capable for controlling for full opening, reduced / partial
opening, locking, one‐way, fire alarm integration with battery back‐up module. In case of
power failure the battery back‐up will operate the door however the door can be manually
operated.
Drive Cover – Stainless Steel AISI 304 brushed finished or powder coated in any RAL color.
Door Dimension – As Per Site Requirements
Page 23 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 24 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 25 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Hygienically smooth surface, impact and disinfectant resistant. Extension arms made from
extruded aluminum section with specially formed five chamber system for extremely high
torsional strength. The pendant system has the flexibility to retrofit or exchange medical gas
outlets and electrical installations easily, without any need to demount the suspension arm
and service heads. Ceiling mounted supply unit consist of suspension arms, service head and
ceiling mounted components.
• Max. Degree of rotation at each arm:330- 350°
• Braking system: Electromagnetic/Pneumatic brakes to control horizontal movement.
• Electrical Sockets German Standard – 08 Pcs
• LAN Data ports RJ45 for PC – 1 Pc
• Telephone Outlets RJ11 – 1 Pc
• Oxygen Outlet: 2 Pcs
• Medical Air 4 Bar: 2 Pcs
• Vacuum Outlet: 1 Pcs
• Nitrous Oxide Outlet: 1 Pcs
AGS Passive
10.b DOUBLE ARM ANESTHESIA PENDANT
General Description - Ceiling mounted Anesthesia Pendant system, powder coated,
Hygienically smooth surface, impact and disinfectant resistant. Extension arms
made from extruded aluminum section with specially formed five chamber system
for extremely high torsional strength. The pendant system has the flexibility to
retrofit or exchange medical gas outlets and electrical installations easily, without
any need to demount the suspension arm and service heads. Ceiling mounted supply
unit consist of suspension arms, service head and ceiling mounted components.
• Max. Degree of rotation at each arm:330- 350°
• Braking system: Electromagnetic/Pneumatic brakes to control horizontal
movement.
• Electrical Sockets German Standard – 08 Pcs
• LAN Data ports RJ45 for PC – 1 Pc
• Telephone Outlets RJ11 – 1 Pc
• Oxygen Outlet: 2 Pcs
• Medical Air 4 Bar: 2 Pcs
• Vacuum Outlet: 1 Pcs
• Nitrous Oxide Outlet: 1 Pcs
AGS Passive
11 DOUBLE DOME LED OPERATING LIGHT WITH HD CAMERA WITH THIRD ARM
FOR MONITOR Each
Light System - High-performance LEDs of different chromaticity is provided for illumination
of the surgical site. The light head shall ensure shadow-free illumination while providing
deep-cavity light at the same time.
Mechanical Design - Ceiling-mounted operating light consisting of a ceiling tube, horizontal
tracking arm and spring arm with cardiac joint and a light head. The spring arm shall allow
full adjustability in height and unrestricted movability. Depending on site conditions (ceiling
structure) a ceiling anchor plate or an intermediate ceiling assembly shall be used for
mounting the light.
System Configuration - The system will consist of single ceiling suspension with 3 arms. Two
Arms for the light domes and third arm for the monitor to Hold 26’’ Monitor.
TECHNICAL SPECIFICATIONS:
No. of dome: 2 (Main and Satellite)
Page 26 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
The Laminar flow ceiling system has a round/square/rectangular base form to produce a
germ‐ and particle lean area through unidirectional homogeneous, low turbulence laminar
air flow. The system is specially designed and suited for the use in Operating room in
accordance with the international standards as mentioned in the specifications here below.
Air Distributor box: built of 2mm aluminum sheet, airtight welded. Varnish disinfectant
resistant bottom side completely varnished RAL 9010. Two rectangular ducts with flange for
fresh air supply, welded sidewise of the distribution box.
Filter grid: Tightly welded and additional on the connection grid‐side wall sealed with
polyurethane to pass the leak‐test. Both the air distributor box and the filter housing are on
the given sheet contact points totally gas‐tight welded (no sealing with silicon or something
similar).
Filter receptacle: All components for the receptacle of the filter element are made of
corrosion‐proof materials. Air tight welded filter intake made of aluminum, air tight
connected with the distribution box with 2‐component polyurethane. Compression
measuring connection for examining the pressure drop of the filter and the pressure drop
pipes are connected to the pressure drop manometers in the cabinet.
High efficiency particulate air filter: The filter medium consists of folded glass fibers‐filter
paper with thread range spacer, whereby the filter medium and the frame are closely
connected. The strong filter frame consists of aluminum and is equipped with an EPDM‐
profile washer. The filter exchange happens from the inside of the room after replacing the
CG‐Distributor frame.
Air distributor: CG distributor frame made of aluminum profiles; double sided covered with
special fabric; subdivided in separate large area elements; downwards removable.
Potential balance: The connection for the potential balance is mounted on the outside of the
air distributor box.
Bounding angle: The air distributor box has an integrated rotary connection angle for
connecting the intermediate ceiling.
TECHNICAL DATA
Page 27 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 28 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
TECHNICAL DATA
Three stations knee operated scrub staton Madeof stainless steel.
Anti Splash basin.
1/2-siphon
Removable or fixed front panel
IR Sensor and 3-knee controls.
3-water tapes with a mixing valve. Water pipe
hoses for cold and hot water.
stainless steel brackets or fittings to fix the sink to the wall.
Hygenic tap shaving built-in-tap thermostatic mixing valve to supply 42◦C hot water.
The tap shall also have built-in strainers and the provision for easy and quick thermal
disinfection to remove the scaling.
"Accessories:
● Soap dispenser unit.
● Hand washing brush dispenser made of SS"
15 4K VIDEO MANAGEMENT & DOCUMENTATION SYSTEM: AUDIO VIDEO
MANAGEMENT, DOCUMENTATION & COMMUNICATION (2 WAY AUDIO AND 1
WAY VIDEO) to be quoted as Optional Optional
Each
General Description: AV System is a modern, lightweight and interconnecting OR
integration solution, comprising of the modules Advance data archiving. The system offers
4K UHD A/V distribution inside the OR, documentation and audiovisual communication
within the hospital environment, designed to be operated from the most compact device in
its class. Due to its minimal footprint, system enables new possibilities of profiting from the
benefits of OR integration without the infrastructural investment
of traditional, hardware-intense products. It comprises of 3 main components.
A/V Management Video distribution in the operating room – in 4K UHD, 3D and FULL
HD.
Documentation Content management in up to 4K UHD – from the endoscope to the
HIS.
The system image chain provides brilliant surgical image quality and content management in
up to 4K UHD, from the endoscope to the Hospital Information System. integrated system
ensures connectivity and management of all its elements - cameras, video sources, monitors
and network connected Participants.
Experience real time communication with collaboration partners within the hospital
network. Benefit from high definition video streaming to share the surgical image with other
consultants or an auditorium in a secure and privacy protected environment. Seamless
communication is ensured with onboard audio talkback function. Emphasize important
anatomical or pathological structures with live video annotations.
Telestration on the touchscreen inside the OR can be used to visually annotate the streamed
image. Get important consultation of another expert during the surgery
Page 29 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Technical data
Video inputs: 5x 12G SDI / 3x HDMI 2.0
Outputs: 6x 12G SDI / 2x HDMI 2.0
USB: 4x USB 3.0 / 1x USB 2.0
LAN: 2x Ethernet
Audio: 1x Audio in / 1x Audio out
Remote control: 2x ACC
Input voltage: 100-240 VAC
Input frequency: 50-60 Hz
Input frequency: 50-60 Hz
Max. input current: 2.5 A (@100 VAC), 1 A (@240 VAC)
Operating mode: Continuous Operation
Degree of protection: IPx0
Protection class: I
Dimensions: 305 x 74.5 x 355 (W x H x D)
Weight: 4 kg
16 HEPA CEILING DIFFUSERS WITH HEPA FILTERS FOR CLEAN CORRIDOR Each
Designed to provide air filtration and distribution in one unit Viruses, bacteria and dust
particles are filtered out of the airstream immediately before the air outlet, eliminating the
risks associated with central system filtration, such as cross contamination in the ventilation
ducts. Filtrasept is ideal for use wherever clean air or a germ‐free atmosphere is needed,
such as Operating Theatres, Treatment Rooms, Intensive Care Units, Sterile Zones and
Page 30 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Isolation Areas.
TECHNICAL DATA
Housing RAL 9010 powder coated
Connection for pressure drop measurement / DEHS test
Connection for filter tight test
Ceiling supporting angle
Perforated Plate Diffuser
HEPA filter type CR‐VS‐H14 557 x 557 x 75
Page 31 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 32 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
All labour, material, equipment and software necessary to meet the functional requirement of
the system as specified herein shall be included in the scope of work. Drawings are
diagrammatic only and all controls, materials, etc. not shown but necessarily required to
meet the functional intent shall be provided without any additional cost to the Owner. All
wiring in connection with the automatic control system shall be as per manufacturer's
recommendations. The term "wiring" shall be construed to include furnishing of wiring
conduiting, miscellaneous material and labour as required for mounting and connection of
the electrical control devices. The control manufacturer shall furnished.
LOCALLY SUPPLIED OF BEST QUALITY
19 FOUNDATION PAD FOR HVAC EQUIPMNT (Civil Works) will be provided SqFt
free of cost by the firm
All foundation related civil work shall include in this scope of work. Providing, laying of crock
sheet 25mm thick, reinforcement for foundation structure and foundation construction work
as per drawing
LOCALLY SUPPLIED OF BEST QUALITY
Electrical Contractor shall provide all cabel works for the equipment to be installed in
operation room in respect to the load requirement of the OR.
PRESSURE GUAGE
Pressure gauges shall be of the phosphor bronze Bourdon tube type. Dial diameter shall be
4½” (114 mm) and shall permit easy reading from flow with black numerals on non-
reflecting white metal dial face. Pressure gauges shall be complete with shut-off cock and
Snubber. Tubes and necessary tubing with socket adapter. The accuracy of pressure gauges
shall be + 1%.
Thermometers
Thermometers for water line shall be industrial mercury type with die-cast aluminum case, 9
inch (225 mm) adjustable stem. Thermometers shall be complete with well for piping. The
thermometers shall have dual calibrations in o F and o C. Thermometer for ducts shall be
remote bulb dial type with stainless steel bulb. Separable stainless steel socket 3/4” (19 mm)
connection with bronze armored capillary shall be provided. Dial size shall be 5” (127 mm)
and 3” (76 mm) for ceiling mounted AHUs. Thermometers shall have dual calibrations in
Page 33 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
degrees Fahrenheit and centigrade with suitable increments. Range shall place operating
temperature at or near the middle of scale. Range shall not be less than one and half times the
maximum temperature. The accuracy of thermometers shall be + 1%. Thermal grease shall be
filled in thermometer wells to ensure to correct sensing of temperatures.
LOCALLY SUPPLIED OF BEST QUALITY
Panel filters for AHUs shall be 2-inch-thick. Panel filters for all ventilation fans (supply air
fans) and outside Air Intake Louvers shall also be 2 inch thick.
NOTE:
The system should be FDA/CE/JIS/MHLW/Eurovent/AHRI/ISO7/ISO5 approved was added in the
specifications.
Country of Origin was added as USA, Europe and Japan.
05 years with parts and services comprehensive warranty.
Life span of the quoted model should be clearly defined by the manufacturer.
Technical training as well as operational training must be provided by the supplier in case if required.
Service manual as well as operational manual must be provided along with the machine.
PPM Schedule should be share with Biomedical Engineering Department along with the supply of
equipment, which will include calibration and validation and validation of the equipment.
Page 34 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 35 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Clinical
Gynecology
Specialty
Generic
Delivery Table/Deliver Bed
Name
Clinical
Purpose Delivery table is widely used for obstetric birthing, gynecology examination and operation.
TECHNICAL SPECIFICATIONS
Backrest adjustment by gas spring
Trendelenburg and reverse Trendelenburg to be quoted as Optional by gas spring
Height adjustment by foot pedal
Anti-microbial, water proof, flame retardant, air permeable mattress
Removable footrest mattress
Stainless steel handles
Stainless steel waste bin
Lockable, adjustable and removable side rails
Removable and Adjustable Polyurethane Thigh Supports
Lockable castors
Protective plastic bumpers
Detachable head board
Height adjustable IV Pole
ABS/HPL covered sub-frame
Stainless steel accessory rails
Easily cleanable, compact laminate mattress platform
Electrostatic powder coated metal frame
IV pole sockets
TECHNICAL DETAILS
External Dimensions: min: 80x155cm max: 80x187cm
Bed Surface: 60x168cm
Height (without mattress): 62-91cm
Backrest Angle: 0o-70o
Trendelenburg Angle: 0o-15o
Reverse Trendelenburg Angle: 0o-15o
Castor Diameter: 125mm
Safe Working Load Capacity: 240kg
Mattress Thickness (backrest and pelvic sections) 8cm
Footrest Mattress Thickness: 12cm
Under bed Clearance: 17cm
NOTE:
The system should be FDA/CE/JIS/MHLW approved and 01 certificate is required
mandatory.
03 years with parts and services comprehensive warranty.
Life span of the quoted model should be clearly defined by the manufacturer.
Technical training as well as operational training must be provided by the supplier in case if
required.
Service manual as well as operational manual must be provided along with the machine.
PPM Schedule should be share with Biomedical Engineering Department along with the
supply of equipment, which will include calibration and validation of the equipment.
Page 36 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
TECHNICAL SPECIFICATIONS
The table top should be 100% radiolucent material & X-Ray access
5 Section table plate or better
Load capacity should be no less than 400kg or better
The table pad should be double layered and not soft but can be molded by the figure of the patient to deliver
even counterforce and reduce the possibility of ulcer, and it should be water-proof and anti-static material and
can be washed by water directly; each joint should be sealed by ultrasonic not glue and sewing.
The thick of mattress should be more than 66.5mm
Remote Control Operated
It should have a battery inside the table, which can work 50-80 operations for two weeks and the battery should
be standard configuration.
It should have electric longitudinal shift function not less than 300mm or better.
It should have an build-in elevator.
The rails & the column of the table should be made of high level of aluminum alloy.
Length of the table >2050 mm or better
Width of the table with rails >500 mm or better
The thickness of mattress >75mm or better
Electric Function
The lowest position >750 mm or better
The highest position <1000mm or better
Longitudinal shift > 300 mm or better
Turn left > 20° or better
Turn right > 20° or better
Trendelendburg position > 30° or better
Reverse Trendelendburg position > 30° or better
Back plate up position >75° or better
Back plate down position > 38° or better
Flex position >210° or better
Re-flex position > 100° or better
Mechanical Function
Head plate up > 45° or better
Head plate down > 90° or better
Build-in elevator > 120 mm or better
Leg plate up >20° or better
Leg plate down >90° or better
Leg plates spread > 180° or better
Accessories
A pair of arm boards with 2 clamps & 4 bands, and it has the universal coupling for up & down & rotary function.
Anesthesia frame with 2 tubes & 1 clamp.
Page 37 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
NOTE:
The system should be FDA/CE/JIS/MHLW approved.
03 years with parts and services comprehensive warranty.
Life span of the quoted model should be clearly defined by the manufacturer.
Technical training as well as operational training must be provided by the supplier in case if required.
Service manual as well as operational manual must be provided along with the machine.
PPM Schedule should be share with Biomedical Engineering Department along with the supply of
equipment, which will include calibration and validation of the equipment.
Page 38 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 39 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 40 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 41 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
The hand control shall control the electric movement of leg plate individually and
simultaneously.
Technical Specification
Length of the table (main unit) = 950 mm or better
Width of the table with rails =590 mm or better
Electric Function
The lowest position ≤ 580 mm or better
The highest position ≥ 1070 mm or better
Longitudinal shift ≥300 mm or better
Turn left ≥ 26° or better
Turn right ≥ 26° or better
Trendelenburg position ≥ 35° or better
Reverse Trendelenburg position ≥ 35° or better
Back plate up position ≥ 90° or better
Back plate down position ≥ 45° or better
Flex position ≥220° or better
Re-flex position ≥ 110° or better
Leg plate up ≥ 80° or better
Leg plate down ≥ 100° or better
"0"position by one electric button
Mechanical Function
Head plate up ≥ 60° or better
Head plate down ≥ 60° or better
Leg plates spread ≥ 180° or better
Accessories
Anesthesia frame
Head support with divided version pad & adaptor connecting with the table
A pair of leg supports with 2 clamps, pads & bands, and it has the universal
coupling for up & down & rotary function
A pair of arm boards with 2 clamps & 4 bands, and it has the universal coupling for
up & down & rotary function
NOTE:
The system should be FDA/CE/JIS/MHLW approved and 01 certificate is
required mandatory
03 years with parts and services comprehensive warranty.
Life span of the quoted model should be clearly defined by the manufacturer.
Technical training as well as operational training must be provided by the
supplier in case if required.
Service manual as well as operational manual must be provided along with the
machine.
PPM Schedule should be share with Biomedical Engineering Department along with the
supply of equipment, which will include calibration and vailidation of the equipment.
Page 42 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Image Intensifier
should have at least triple field 9” input diameter or better
having entrance screen of Cesium Iodine
TV camera should be of high resolution at least 1k x 1k or more.
TV camera type should be CCD
Image rotation should be digital having reversible option as well.
X- ray generator:
At least 15 KW or even better
Max X-Ray tube current 120 mA or better
Max X-ray tube Voltage 110kv or better
X-Ray Tube
X-ray tube of dual focal spot 0.5 and 1.5 (300 KHU) or better.
Must have rotating anode
X-ray tube voltage 110kv or better
Should have inherent filtration
Collimators should have side shutters
Fluoroscopy output:
40-110 KV or better
Low dose management system
mA range 0.1 to 9 mA or better on low dose
mA range 0.2 to 18mA or better on continuous
Image processing:
Two 19˝ or better LCD monitors for diagnostic image quality display with one 7inches or more touch
screen for better handling.
Resolution should be 1280 x 1024 pixels or better
The system should have automatic dose level selection.
Contrast ratio should be 500:1 or more
Maximum light output 500 cd/m2 or more
Image storage of 10000 images or more.
It should have image annotation facility; measuring of distances and angles, support of DICOM 3.0
functions.
System must have DSA with 30fps
Page 43 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
NOTE:
• The system should be FDA/CE/JIS/MHLW approved.
• 03 years with parts and services comprehensive warranty.
• Life span of the quoted model should be clearly defined by the manufacturer.
• Technical training as well as operational training must be provided by the supplier in case if
required.
• Service manual as well as operational manual must be provided along with the machine.
• PPM Schedule should be share with Biomedical Engineering Department along with the supply
of equipment, which will include calibration and vailidation of the equipment.
Page 44 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Image Intensifier
should have at least triple field 9” input diameter or better
having entrance screen of Cesium Iodine
TV camera should be of high resolution at least 1k x 1k or more.
TV camera type should be CCD
Image rotation should be digital having reversible option as well.
X- ray generator:
At least 15 KW or even better
Max X-Ray tube current 120 mA or better
Max X-ray tube Voltage 110kv or better
X-Ray Tube
X-ray tube of dual focal spot 0.5 and 1.5 (300 KHU) or better.
Must have rotating anode
X-ray tube voltage 110kv or better
Should have inherent filtration
Collimators should have side shutters
Fluoroscopy output:
40-110 KV or better
Low dose management system
mA range 0.1 to 9 mA or better on low dose
mA range 0.2 to 18mA or better on continuous
Image processing:
Two 19˝ or better LCD monitors for diagnostic image quality display with one 7inches
or more touch screen for better handling.
Resolution should be 1280 x 1024 pixels or better
The system should have automatic dose level selection.
Contrast ratio should be 500:1 or more
Maximum light output 500 cd/m2 or more
Image storage of 10000 images or more.
It should have image annotation facility; measuring of distances and angles, support of
Page 45 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
NOTE:
The system should be FDA/CE/JIS/MHLW approved.
03 years with parts and services comprehensive warranty.
Life span of the quoted model should be clearly defined by the manufacturer.
Technical training as well as operational training must be provided by the supplier
in case if required.
Service manual as well as operational manual must be provided along with the
machine.
PPM Schedule should be share with Biomedical Engineering Department along with the
supply of equipment, which will include calibration and vailidation of the equipment .
Page 46 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Camera Head
Lens mount: C-mount
CMOS image sensor x3
Magnification ratio: Focal lens 16-32 mm
Chromo endoscopy technology
White Balance adjustment
Snap/Record function
Customizable HEAD B switch function
Customizable +/- buttons function to choose from Brightness adjustment, Edge
enhancement, Image magnification or Contrast enhancement
Image Processor
Resolution 3840*2160p@60fps or better
Storage USB, snap to export
Video output signal: DVI*2, HD-SDI*2, Y/C*1, CVBS*1
Digital zooming: 2-times , 3-step setting or better
White balance: Auto and memory
Image enhancement: Edge enhancement
IRIS: Auto/Peak/Average
Light Source
Lamp: LED
Brightness: Level 1-19
Light modes: WL / VIST
Standby mode: Low illumination
Lamp life: ≥10,000 hours or better
Mechanical features: Low heat, low noise
Illumination Cable
Total length(mm,±5%): 3000 or better
Dimensions of light input surface (mm,±10%): Diameter:5.4 Lengt:62 or better
Dimensions of light output surface (mm,±10%): Diameter:5.3 Lengt:16.0 or better
Light output angle (°,±10%): 40 or better
Page 47 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Rigid Endoscopes:
Page 48 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 49 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
NOTE:
The system should be FDA/CE/JIS/MHLW approved.
03 years with parts and services comprehensive warranty.
Life span of the quoted model should be clearly defined by the manufacturer.
Technical training as well as operational training must be provided by the supplier
in case if required.
Service manual as well as operational manual must be provided along with the
machine.
PPM Schedule should be share with Biomedical Engineering Department along with the
supply of equipment, which will include calibration and vailidation of the equipment.
Page 50 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 51 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
3.10 OT LIGHT (DOUBLE DOME WITH BUILT IN CAMERA AND RECORDING SYSTEM)
Clinical Specialty Operation Theater
Generic Name OT Light
Clinical Purpose This is ceiling hanged operation theater light used to see and examine
different body parts during surgery to help surgeon to perform surgeries in a
clear visible environment.
S.NO. TECHNICAL SPECIFICATIONS
TECHNICAL REQUIREMENTS
Specifications Requirements for the Main and Satellite Light
Central illuminance at 1m distance ≥ 160,000 lx or better
Light Field Diameter at 1m distance adjustable from 180~300mm or better
Color Temperature (K) 4,350K or better
Color Rendering Index Ra ≥ 96 or better
Color Rendering Index R9 ≥ 97 or better
Depth of Illumination ≥ 1,000mm or better
Dimming Range: 5~100% or better
Radiant energy(Ee/Ec (average)) ≤ 3.6mW/(m2*lx) or better
LED Service Life: ≥ 50,000hrs or more
Power Supply: 100~240VAC, 50~60Hz
Page 52 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
NOTE:
The system should be FDA/CE/JIS/MHLW approved.
03 years with parts and services comprehensive warranty.
Life span of the quoted model should be clearly defined by the manufacturer.
Technical training as well as operational training must be provided by the supplier
in case if required.
Service manual as well as operational manual must be provided along with the
machine.
PPM Schedule should be share with Biomedical Engineering Department along with the
supply of equipment, which will include calibration and vailidation of the equipment .
Page 53 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Clinical Purpose This is ceiling hanged operation theater light used to see and examine
different body parts during surgery to help surgeon to perform
surgeries in a clear visible environment.
Control pannel Touch screen should be equipped beside the lighthead as standard
configuration for ergonomic user experience.
The light head shall be shape to avoid laminar flow influence by turbulence, with
Verified Certificate Din-1946 Part 4.
The light shall be mountable to ceiling from a single center. Light head bearing the arms
shall be rotateable 360 degrees around its own axis and mounting point. Each Light
head shall be rotatable at least 300 degrees around its own axis or better
The maximum movement angle of the spring arm shall be at least up 45°and down 50°
or better
The maximum movement range of the horizontal arm & spring arm should be at least
1,600 mm. Or better
The thickness of the light head shall be no more than 50mm or better
Each LED shall be replaceable individually with the new one to save cost in case of
failure, instead of replacing the module with several LEDs
TECHNICAL REQUIREMENTS
Page 54 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
NOTE:
The system should be FDA/CE/JIS/MHLW approved.
03 years with parts and services comprehensive warranty.
Life span of the quoted model should be clearly defined by the manufacturer.
Technical training as well as operational training must be provided by the supplier
in case if required.
Service manual as well as operational manual must be provided along with the
machine.
PPM Schedule should be share with Biomedical Engineering Department along with the
supply of equipment, which will include calibration and vailidation of the equipment .
Page 55 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 56 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Ventilation Modes:
•Manual/ Spontaneous Ventilation
•Volume Control VCV (IPPV/mode)
• Pressure Control PCV with volume guarantee or equivalent
•SIMV Volume Control + SIMV Pressure Control
•Pressure Support with Apnea
•Cardiac Bypass Mode
Ventilation Monitoring:
•Fio2
•Inspired and Expired Volume
•Monitor Interface Capability
•Spirometer Loops
•PAW, Pressure Waveform, Flow Waveform
•Inverse I:E 4:1 - 1:8 or better
•Gas Specific input connector (Oxygen) ISO standard
•Tidal Volume: 20 to 1500ml or better
•BPM Rate: 4 to 100 bpm or better
•PEEP: off, 3 to 30mH20 or better
•Pressure Inspired: 05 to 70cmH2O or better
•Pressure Limit: 10 to 100cmH20 or better
•Pressure Support Range: 05 to 50cmH20 or better
Power Supply: 220V/50HZ AC
Battery Backup: Minimum 2 Hours or better
Page 57 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
•It should have following as standard configuration: ECG, HR, RESP, NIBP, SPO2
and TEMP, ST analysis, ETCO2, 2xIBP Diathermy/electro surgical protection.
•Should have alarms for warnings
•Trend: Store and review 48 hours or more
NOTE:
The system should be FDA/CE/JIS/MHLW approved.
03 years with parts and services comprehensive warranty.
Life span of the quoted model should be clearly defined by the manufacturer.
Technical training as well as operational training must be provided by the supplier in
case if required.
Service manual as well as operational manual must be provided along with the
machine.
PPM Schedule should be share with Biomedical Engineering Department along with the
supply of equipment, which will include calibration and vailidation of the equipment .
Page 58 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 59 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 60 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
TECHNICAL SPECIFICATIONS
It adopts double-column design, the bed frame is made of high-strength carbon fiber material, which
forms a stable, safe and reliable spine operating table with the columns on both sides.
The carbon surgical bed adopts imported motor, stable, safe and noise-free.
This carbon operating table can be turned over manually 360°, full perspective without dead angle,
and meet the surgical position requirements from prone position to supine position during surgery.
The all carbon fiber four-point spine support body is made of Radiolucent material, and there is no
metal to facilitate the shooting of C-arm, G-arm and O-arm without shadows.
The front and rear adjustment range of the four-point support body is ≥ 1000mm, and the
left and right adjustment range as per manufacturer. Suitable for children and adults.
The length of the bed is ≥ 2260mm, the width of the base is ≥ 780mm, the length of the bed
is ≥ 2960mm, the width is ≥ 500mm, the lifting range: minimum ≤ 680mm, maximum ≥
1130mm, the table can also be mechanically adjusted in height from 0-400mm, electric
front and rear tilt angle ≥12°, left and right tilt ≥20°.to be quoted from OEM.
The height of the headrest in prone position can be adjusted from 0-300mm, the headrest can be
adjusted 360° in all directions, and it is equipped with an intubation channel and an intubation
reflector for medical staff, which is convenient for checking whether the intubation is normal.
The base adopts four-point/Central caster brake to ensure the safety and stability of the table.
The carbon operating table is detachable, and the base can be retracted and stored for easy
transportation.
Standard configuration
Spine operating table main body (double column) 1 set
Carbon frame 1set
The head positioning system includes a set of head pads (including a special holder)
Two multi-joint arm supports (including special grippers)
5. Four-point pads (including high-grade blue sponge pads) 1 set
Handheld remote control 1pc
NOTE:
The system should be FDA/CE/JIS/MHLW approved.
03 years with parts and services comprehensive warranty.
Life span of the quoted model should be clearly defined by the manufacturer.
Technical training as well as operational training must be provided by the supplier in case if required.
Service manual as well as operational manual must be provided along with the machine.
PPM Schedule should be share with Biomedical Engineering Department along with the supply of
equipment, which will include calibration and validation of the equipment.
Page 61 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 62 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Clinical
ENT
Specialty
Generic FESS System
Name
Clinical Functional Endoscopic Sinus Surgery (FESS) is one of the most common surgical methods
Purpose to treat chronic sinus infections. In a FESS procedure, the surgeon uses a magnifying endoscope
to see and remove affected tissue and bone.
TECHNICAL SPECIFICATIONS
ENT Telescope, diameter 4 mm, length 18 cm, autoclavable, variable direction of view
from 15° - 90°, adjustment knob for
selecting the desired direction of view, fiber optic light transmission incorporated, color
code: gold
Straight Forward Telescope 0°, enlarged view, diameter 4 mm, length 18 cm,
autoclavable, fiber optic light transmission
incorporated, color code: green
Forward-Oblique Telescope 30°, enlarged view, diameter 4 mm, length 18 cm,
autoclavable, fiber optic light transmission
incorporated, color code: red
Lateral Telescope 70°, enlarged view, diameter 4 mm, length 18 cm, autoclavable, Fiber
optic light transmission incorporated, Color
code: yellow
Forward-Oblique Telescope 45°, enlarged view, diameter 4 mm, length 18 cm,
autoclavable, Fiber optic light transmission
incorporated, Color code: black
ENT Shaver system with color display, touch screen, two motor outputs, integrated
irrigation pump and integrated module
Consisting of :
ENT Shaver Unit
Mains Cord
Irrigator Rod
Two-Pedal Footswitch, two-stage, with proportional function
Silicone Tubing Set, for irrigation, sterilizable
Clip Set, for use with Tubing Set
Connecting Cable, length 100 cm
Single Use Tubing Set, sterile, package of 3
Shaver Handpiece
Suction Shaver Blade with integrated irrigation, Handpiece straight, sterilizable, concave
cutting edge, oval cutting
window, diameter 4 mm, length 12 cm, color code: blue-green, for use with Handpieces
Suction Shaver Blade with integrated irrigation, Handpiece straight, sterilizable, serrated
cutting edge, rectangular
cutting window, diameter 3 mm, length 12 cm, color code: blue-red for use with
Handpieces
Suction Shaver Blade with integrated irrigation for Handpiece, curved 40°, sterilizable,
cutting edge serrated backwards, double
serrated, rectangular cutting window, diameter 4 mm, length 12 cm, color code: blue-
Page 63 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Consisting of:
Mains Cord, length 300 cm
DVI-D Connecting Cable, length 300 cm
Connecting Cable, length 100 cm
USB Flash Drive,
USB Silicone Keyboard, with touchpad, US
Page 64 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
HD link module, for use with FULL HD threechip camera heads, power supply 100 - 120
VAC/200 - 240 VAC, 50/60 Hz
Three-Chip FULL HD Camera Head, HD compatible, progressive scan, soakable, gas- and
plasma-sterilizable, with integrated
Parfocal Zoom Lens, focal length f = 15 - 31 mm (2x), 2 freely programmable camera head
buttons
LED 150, High-Performance LED Light Source with one light outlet, power supply 100 -
240 VAC, 50/60 Hz
Fiber Optic Light Cable, with straight connector, diameter 4.8 mm, length 300 cm
27" or more FULL HD Monitor, color systems PAL/NTSC, max. screen resolution 1920 x
1080, image
format 16:9, Interface: RS 232, power supply 85 - 264 VAC, 50/60 Hz, wall mount with
VESA 100 adaptor
NOTE:
The system should be FDA/CE/JIS/MHLW approved.
03 years with parts and services comprehensive warranty.
Life span of the quoted model should be clearly defined by the manufacturer.
Technical training as well as operational training must be provided by the supplier in case if required.
Service manual as well as operational manual must be provided along with the machine.
PPM Schedule should be share with Biomedical Engineering Department along with the supply of
equipment, which will include calibration and validation of the equipment.
Page 65 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Clinical
ICU, HDU
Specialty
Generic
Motorized Patient Beds/Electro-Hydraulic Patient Beds
Name
Clinical A full electric hospital bed for home use features electric motor controls that raise the head, foot
Purpose and height of the bed frame with a push of a button. ... These full electric hospital beds allow
patients to dial in their desired bed height without the aid of a caretaker, making transfers to and
from a bed easier.
TECHNICAL SPECIFICATIONS
4 motors
Electronic adjustments of backrest, footrest, height
Trendelenburg and Reverse Trendelenburg functions
Fowler, Vascular and Cardiac positions
Auto-contour
Function-Lock System to prevent unauthorized use
Angle indicator for backrest adjustment and
Trendelenburg positions
Auto-regression system
Electronic CPR
Auto-CPR button + manual
Lockable and fold-away PP side rails
Lockable and detachable Polypropylene head and foot boards
4 section, detachable mattress platform
Electrostatic powder coated metal frame
Gradually adjustable footrest
Drainage bag hooks at both sides
IV pole sockets located at four corners
Protective plastic corner bumpers
Central lockable castors
Height adjustable stainless steel IV pole
Page 66 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
NOTE:
The system should be FDA/CE/JIS/MHLW approved.
03 years with parts and services comprehensive warranty.
Life span of the quoted model should be clearly defined by the manufacturer.
Technical training as well as operational training must be provided by the supplier in case
if required.
Service manual as well as operational manual must be provided along with the machine.
PPM Schedule should be share with Biomedical Engineering Department along with the
supply of equipment, which will include calibration and validation of the equipment.
Page 67 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 68 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
DICOM Basic
Digital Thermal Printer
Online UPS Pure Sine-Wave 3KVA or more
NOTE:
5. The system should be FDA/CE/JIS/MHLW approved.
6. 03 years with parts and services comprehensive warranty.
7. Life span of the quoted model should be clearly defined by the manufacturer.
8. Technical training as well as operational training must be provided by the supplier in
case if required.
9. Service manual as well as operational manual must be provided along with the
machine.
10. PPM Schedule should be share with Biomedical Engineering Department along with
the supply of equipment, which will include calibration and validation of the
equipment.
Page 69 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Clinical
ICU, Pulmonology ENT
Specialty
TECHNICAL SPECIFICATIONS
Full High Definition Video Processor & Light Source
Brilliant, Full high definition (1920 x1080 HD images for a clear and more
detalied visualization.
It should be HD Digital/optical Video and image processor.
Page 70 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Up 180◦
Down 130◦
with standard set of accessories
Endoscopic Cart/Troley (From the Manufacturer)
Compatible with above Endoscopes/system
Erosion free durable material
Should have castors wit brakes.
Endoscopic storage cabinet (Supplied Locally):
Compatible with above Endoscopes
Front opening / with complete fitting
Should havecapability to store 5 endoscopes
Endoscopic disinfector (Supplied Locally):
Automatic disinfectin system& Should be able to clean all external/internal
surfaced of endoscopes.
Compatible with quoted endoscopes.
Note:
The system should be FDA/CE/JIS/MHLW approved.
03 years with parts and services comprehensive warranty.
Life span of the quote model should be clearly defined by the manufacturer.
Technical training as well as operational training must be provided by the
supplier in case if required
Service manual as well as operational manual must be provided along with the
machine.
PPM schedule should be share with Biomedical Engineering Deptt: along with
the supply of equipment, which will include calibration and validation of the
equipment.
Page 71 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 72 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 73 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
TECHNICAL SPECIFICATIONS
Semi-automatic maximum 200 joules biphasic defibrillator with monitor and AED mode.
Synchronized output with ECG.
Control of energy charging/ delivering on main panel and paddle.
The energy range should be adjustable for Paeds and adults up to 200Joules.
Charging Time for full energy will be less than 08 sec.
Screen Size of approx. 6.5 inch or better colored.
Display of HR Adult: 15 to 300 bpm, Pediatric, Neonate: 15 to 350 bpm
ECG through Pads / paddles and 3 Lead ECG patient cable with arrhythmia detection
Built in recorder for printing of full summery on standard paper including waveforms, Frozen
Waveforms, Event Summary, Tabular Trends, User test, and Configuration.
Alarms for High and low Heart rate, low battery warning.
AC 220V / 50 Hz operated.
Built-in Rechargeable battery with charger for at least 80 shocks at max. Energy and 2.5 hours
or better, Monitoring
Auto tester/self-check.
External pediatric and adults Paddles, ECG cable with reusable electrodes for adult & Paeds.
AED facility.
Pacing rate:30-210ppm
NOTE:
The system should be FDA/CE/JIS/MHLW approved.
03 years with parts and services comprehensive warranty.
Life span of the quoted model should be clearly defined by the manufacturer.
Technical training as well as operational training must be provided by the supplier in case
if required.
Service manual as well as operational manual must be provided along with the machine.
PPM Schedule should be share with Biomedical Engineering Department along with the
supply of equipment, which will include calibration and validation of the equipment.
Page 74 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 75 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 76 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Suction support
P0.1 measurement
NIF measurement
PEEPi measurement
Low flow PV tool to decide optimal PEEP setting. Calculate and display upper and lower inflection
points. Store up to 4 historical measurements.
ATRC: automatic tube resistance compensation
Weaning Tool
Recruitment Maneuver: Sustain inflation method.
Basic flow: automatic adjustment, range: 3-40L/min(invasive);10-65L/min(non-invasive)
or better
Page 77 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
PEEP: High/Low
Inspired O2 concentration: High/Low
EtCO2: High/Low
Apnea
Breathing circuit disconnect / Leakage
Breathing circuit occlusion
Power Supply Fail
Gas Supply Fail
8. Communication
Ventilator Data, trends and screenshots can be exported to USB
Communication ports: RS232, VGA, USB, Ethernet, Nurse Call etc.
NOTE:
The system should be FDA/CE/JIS/MHLW approved. One Certificate mandatory.
03 years with parts and services comprehensive warranty.
Life span of the quoted model should be clearly defined by the manufacturer.
Technical training as well as operational training must be provided by the supplier in case
if required.
Service manual as well as operational manual must be provided along with the machine.
PPM Schedule should be share with Biomedical Engineering Department along with the
supply of equipment, which will include calibration and validation of the equipment.
Page 78 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 79 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
TECHNICAL SPECIFICATIONS
Electromotive lifting Controlled by remote.
Built-in Battery Backup with two batteries for at least 24 hours.
Optimum solution for supine lifting of patients in critical care.
For repositioning and turning of parallel and bedridden patients in CCU, ICU
and HDU or Ward.
For transferring patients on chairs or Toilet seat from bed.
For transferring patient from shifting trolley to bed or OT table.
Safe Working load: 180 kg or batter.
Vertical column for maximum support and accurate positioning
Powered chaise (Leg extension) for convenient transfer to toilet and Chair
Battery Discharge indicator.
Display of total usage time.
System Failure Override.
Protection Class: Lifter IPX-4
Protection Class: Hand Set IPX-7
Minimum Lifting height: 225 mm or batter.
Maximum Lifting height: 1540 mm or batter.
Accessories:
1 x Patient Bar for lifting in Spine position.
1 x Patient powered bar for lifting in chair position
6 x Slings for spine and chair position lift.
Built in Weight Scale (Optional)
NOTE:
The system should be FDA/CE/JIS/MHLW approved.
03 years with parts and services comprehensive warranty.
Life span of the quoted model should be clearly defined by the
manufacturer.
Technical training as well as operational training must be provided by the
supplier in case if required.
Service manual as well as operational manual must be provided along
with the machine.
PPM Schedule should be share with Biomedical Engineering Department
along with the supply of equipment, which will include calibration and
validation of the equipment.
Page 80 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
TECHNICAL SPECIFICATIONS
ENT Treatment Unit
Spray : 03 minimum
Suction : 02 minimum
Mirror quick heater : 01 minimum
Ventilation : 01 minimum
Reflection light with curved pole : 01 at least
Pen light : 01 at least
Medicine bottle : 04 minimum
Deposit for used instrument (100mm Can) : 02 or more
83mm Can : 03 or more
53mm Can : 02 or more
Instrument tray : 01 or more
Maximum power consumption: 1200VA
Compressor motor : 2.3kgf/㎠ ± 0.3kgf㎠ or better
Suction motor : 680mmHg or better
2. Patient Chair
Hydraulic Mechanism
Rotation : 340 Deg. Manually or better
Foot switch for Up / Down / Front / Rear
Armrest : 360 Deg. Rotation
Headrest : Up/Down/Front/Rear
Foot switch : 01
Power cable : 01
Power supply: AC 220V, 60Hz
Power consumption: 460VA
Hydraulic Mechanism
Rotation : 340 Deg. Manually or better
Foot switch for Up / Down / Front / Rear
Armrest : 360 Deg. Rotation
Headrest : Up/Down/Front/Rear
3. Endoscope System
Otoscope : 01 or more
Power cable : 01 or more
Video cable : 01 or more
Page 81 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Gun type camera head with light guide cable combined : 01 or more
Adapter lens (F-25mm) : 01 or more
LCD 19” Monitor with arm : 01 or more
Foot switch : 01
Power consumption : 200VA
Features : 1/2/4 capture or better
Video output : 3 x CVBS or better
Image sensor : 1/3” CCD or better
Aspect ratio : 4:3 or better
Frame rate : 25/30fps@D1 or better
Head type : Gun type
Light source : LED, One channel
Color temperature : about 5,800K or better
Lamp life : about 30,000hours or better
4. Doctor Stool
Main body : 01
Adjustment : Gas cylinder
Seat size : 450mm x 390mm or better
NOTE:
Page 82 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
TECHNICAL SPECIFICATIONS
Delivers blood and intra venous fluid to the patient and normothermic
temperature at wide range of flow rates from gravity flow rates to 10 to 5000
ml/hr.
Keeps blood/fluid warms between temperature range of 37C to 42C
Dedicated disposable triple lumen tubing that eliminates patient line cool
down of infuscate
Single step programming of warmer
Easy to setup and easy to use
Simple once a year maintenance
Displays set point of recirculating reservoir
Audible and visual alarms if reservoir temperature reaches above the set valve
Meets all the AABB standards for blood warming
Must be easy to clean
Disposable must be latex free
Should have built in safety audio and visual alarms for check disposables, add
recirculating solution and over temperature
Built in over temperature test button and alarm test button.
NOTE:
Page 83 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
TECHNICAL SPECIFICATIONS
Monitor for Endoscopes, Kit, screen size 7" or more with 1280 x 800
1 pixel resolution or better, two camera inputs, a USB and a HDMI
port, optimized user interface,
video and image capturing in real time on SD card, playback of recorded
video clips and still images, data transfer from SD card to USB flash
drive possible, splash-proof according to IP54, suitable for wipe
disinfection, shock-resistant ABS plastic housing,
intelligent power management with rechargeable Li-Ion batteries,
VESA mounting option, power adaptor for EU, UK, USA and Australia,
power supply 110 - 240 VAC, 50/60 Hz,
consisting of:
Monitor
SD Card, 16 GB
Protection Cap
VESA Quick Clip
Power Supply
Plug Adaptor
IEC (ROW) Plug
Adapter Cable
Pocket Monitor Set, unit with LCD monitor and power supply for all
2
video laryngoscopes, with system interface,
screen size 3.5"or more, documentation of images and video sequences
saved on internal memory, monitor movable via
two rotation axes, rechargeable Li-Ion battery, 1 h operation
time, exchangeable battery pack, 2 h charging time,
power management with capacity indicator, protection class IPX8, for use
with Video Laryngoscopes
consisting of:
Pocket Monitor
Battery, rechargeable
USB Data Cable
Protection Cap
Page 84 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 85 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Video Laryngoscope MAC #4, with laryngoscope blade, size 4, for single
14
use, package of 10,
Video Laryngoscope MAC #3, with laryngoscope blade, size 3, for single
15
use, package of 10,
Page 86 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 87 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 88 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 89 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
consisting of:
Subrack for Mobile Stand
Beam Module, with tube
Drawer
Equipment Rail
Cross Tube Adaptor
Round Pipe, length 25 cm
NOTE:
The system should be FDA/CE/JIS/MHLW approved.
03 years with parts and services comprehensive warranty.
Life span of the quoted model should be clearly defined by the manufacturer.
Technical training as well as operational training must be provided by
the supplier in case if required.
Service manual as well as operational manual must be provided along with
the machine.
PPM Schedule should be share with Biomedical Engineering Department along
with the supply of equipment, which will include calibration and validation of the
equipment.
Page 90 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 91 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
NOTE:
The system should be FDA/CE/JIS/MHLW approved.
03 years with parts and services comprehensive warranty.
Life span of the quoted model should be clearly defined by the
manufacturer.
Technical training as well as operational training must be provided
by the supplier in case if required.
Service manual as well as operational manual must be provided along
with the machine.
PPM Schedule should be share with Biomedical Engineering Department
along with the supply of equipment, which will include calibration and
validation of the equipment.
Page 92 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 93 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 94 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
TECHNICAL SPECIFICATIONS
Microprocessor based servo controlled temperature system
Control modes: Air mode and baby skin mode
Humidity control system, oxygen concentration display system
LED Display of Set temperature, Air temperature, baby skin temperature,
humidity, oxygen concentration, timer and heating power.
Self - testing function, various failure alarms by audible and visual
>37° temperature set function
Embedded integrated sensor module
Triple protection for over temperature with separate cut off device,
more safety system
The inclination of infant bed is adjustable
Double wall hood, 4 operating windows and 2 iris ports
Independent locking device for front door
RS232 connector, Oxygen inlet
Optional :
X ray cassette Tray
Baby Weight System
Electric height adjustable
LED phototherapy unit
Air and oxygen blender
Power Supply AC110/220V 60/50Hz
Power Input 420 VA
Operating Conditions
Environment Temperature 20°C ~ 30°C
Environment Relative humidity 30% ~ 75% RH
Environment Air Velocity of flow < 0.3m/s
Air Temperature Control range 25°C ~ 38°C
Skin Temperature control range 32°C ~ 38.5°C
Humidity display range 0% ~ 100% RH
Humidity Control range 20% ~ 60% RH
Page 95 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
NOTE:
The system should be FDA/CE/JIS/MHLW approved.
03 years with parts and services comprehensive warranty.
Life span of the quoted model should be clearly defined by
the manufacturer.
Technical training as well as operational training must be provided
by the supplier in case if required.
Service manual as well as operational manual must be provided
along with the machine.
PPM Schedule should be share with Biomedical Engineering
Department along with the supply of equipment, which will
include calibration and validation of the equipment.
Page 96 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
Page 97 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
TECHNICAL SPECIFICATIONS
Display: 5" or more TFT, touch screen, led backlight
Lead: Standard 12 leads
Patient leak current: <10 micro A
Input Impedance: >50ΜΩ
Frequency response: 0.05Hz ~ 150Hz (-3dB)
Dimension of recording paper : 210mm (W) x 20m (L) high-speed
thermal paper
Paper speed : Auto record : 25mm/s, 50mm/s, error : ±5%
Measurement parameters : HR, P-R. interval, P Duration, QRS Duration, T Duration, Q-T
interval, Q-Tc, P Axis, QRS Axis, T Axis, R(VS), S(VI),
R(VS) + S(VI)
Memory : 1 ECG cable, 1 ground wire, 1 set limb electrode clamp
1 paper roll, 1 set chest electrodes, Power connection USB
connection, Software (same languages as internal software)
Manual: GB, FR, IT
CMRR : > 60dB, > 100dB (Adding Filter)
Time constant : Time constant > 3.2s
Input Way : Floating and defibrillation protection
CMRR : > 60dB, > 100dB (Adding Filter)
EMG interference filter : 35 Hz (-3dB)
Recording way : Thermal printing system
Rhythm record : 25mm/s, 50mm/s, error : ±5%
Manual record : 5mm/s, 6.25mm/s, 10mm/s, 12.5mm/s, 50mm/s,
error : ±5%
Sensitivity selections : 5, 10, 20, 40mm/mV, error : ± 5%.
Standard sensitivity is 10mm/mV ± 2mm/mV.
Auto record : Record setup according to auto record format and
mode, automatically changing leads, measuring and analyzing.
Rhythm record : Record setup according to rhythm record format
and mode, automatically measuring and analyzing.
Manual record : Record setup according to manual record format,
manually changing leads.
Product safety type : Class I CF applied part; there is defibrillation
and packing protection circuit in it.
Page 98 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
NOTE:
The system should be FDA/CE/JIS/MHLW approved.
03 years with parts and services comprehensive warranty.
Life span of the quoted model should be clearly defined
by the manufacturer.
Technical training as well as operational training must be provided
by the supplier in case if required.
Service manual as well as operational manual must be provided along
with the machine.
PPM Schedule should be share with Biomedical Engineering
Department along with the supply of equipment, which will
include calibration and validation of the equipment.
Page 99 of 132
DETAILS SPECIFCATIONS (TENDER OPENING ON 13-04-2022) FY VALID TILL 30-06-2023.
TECHNICAL SPECIFICATIONS
Pre-warming mode, manual mode and baby mode controlled by
micro-computer
LCD display with temperature data storage and curve display function
Multiple failure alarm indication
Horizon angle of heater head and bassinet inclination adjustable
Built-in LED phototherapy function
Panels around bassinet can be turned outward
Silicon mattress can be warmed and temperature is controllable
APGAR timer
Vertical Height Adjustment (VHA) stand
Power Supply: AC220V-230V/50Hz
Maximum Power Output: ≤900VA or better
Control Mode: pre-warming mode, manual mode and baby mode are
controlled by micro-computer)
Baby Mode Temperature Control Range: 34.5-37.5°C or better
Adjustable Range of Mattress Warming: 25-38°C or better
Temperature Uniformity of Mattress: ≤2°C or better
Angle of Warming Module: ±60° or better
Bassinet Inclination: maximum angle of upward tilt; 20°, maximum
angle of downward tilt; 20°
Accuracy of Skin Temperature Sensor: ±0.3°C
APGAR Timer: emits audible tones at 1’, 5; 10’ increments
Failure Alarms: over temperature alarm, deviation alarm, sensor failure
alarm, power failure alarm, setting alarm, checking alarm and many more
Maximum Billirubin of Radiation on Mattress (effective range): 0.8mw/cm2
Billirubin Uniformity of Radiation on Mattress (effective range): >0.4
Standard Configuration:
Main Unit (warming module, controller, bassinet, main column and VHA
stand)
Skin Temperature Sensor
IV Stand
Silicon Mattress
TECHNICAL SPECIFICATIONS
Latest Blood Component Collection Technology
Portable Apheresis system for cell therapy.
Therapeutic Apheresis.
Transfusion Medicine.
Programmable Microprocessor Controlled.
Applicable to both adults and paeds.
Discontinuous flow centrifuge system.
Single needle for all type of application protocols.
Aphaeresis options to collect Platelets, Red Blood Cells, Plasma &
Stem Cells
Leukodepleted platelets in a fully automated procedure
Ease of use & flexibility
Data acquisition capability
Upgradeable Software & compatible with new generation of kits
26 kg weight
Single Access
Power: 550W
Centrifuge Speed: 3000-7000 RPM
Inlet Flow ml/min: 20-100
Anticoagulant Ratio: 1:8 – 1:16
Closed & Open Apheresis Kits available
Monitors & Alerts: 4 air detectors, 2 pressure monitors,
2 spill sensors, 2 separation sensors.
Self-Regulating Flow
Standard Protocols
Leukodepleted Platelets & Plasma
Therapeutic Plasma Exchange
Optional Protocols
Blood Component Collection
Platelet Poor Plasma
Fresh Frozen Plasma
Leukodepleted Platelets & Red Blood Cells
NOTE:
The system should be FDA/CE/JIS/MHLW approved.
03 years with parts and services comprehensive warranty.
Life span of the quoted model should be clearly defined
by the manufacturer.
Technical training as well as operational training must be provided
by the supplier in case if required.
Service manual as well as operational manual must be provided
along with the machine.
PPM Schedule should be share with Biomedical
Engineering Department along with the supply of equipment,
which will include calibration and validation of the equipment.
TECHNICAL SPECIFICATIONS
Motorized 3-point head fixation with automatic opening on completion
of exposure
Integrated temple width measurement ensures automatically a
patient specific orbit
Patient immobilization positioning (1x forehead and 2x temple supports)
Automatic Patient positioning by Occlusal bite block, Chin Support and
02 laser beam system
Control Mirror for patient positioning
Tray for jewelry and drawer for accessories
Automatic adjustment to the jaw width
Automatic radiation management for different images
Directly connectable to the network (Should has its own IP)
Color Touch Screen user interface can be swiveled and tilted
Remote control with LCD to show exposure parameters and dual
exposure button
4 Patient sizes
Programs:
Panoramic Programs:
For adult:
Artifact reduced for adult
Constant magnification 1.25x for adult
With ascending rami
Artifact reduced without ascending rami
Constant magnification 1.25x for adult without ascending rami
For children:
Artifact reduced for children
Constant magnification 1.25x for children
Thick slice for anterior tooth region
Bitewing in the posterior tooth region
Bitewing in the anterior tooth region
Lateral view of TMJ with mouth open and closed
Lateral view of TMJ ascending rami
Paranasal sinuses
Paranasal sinuses, linear slice orientation
Quick shot program: PAN 9.1 sec & CEPH 4.7 sec.
Ceph Programs:
Posterior-anterior, symmetrical
Anterior-posterior, symmetrical
Lateral Ceph (size 18x23cm) asymmetrical
Lateral Ceph full format (size 30x23cm)
Carpus view, symmetrical
Technical data:
3D resolution in HD mode: 80 μm or better
3D Volumes in single shot without stitching:
Ø5x5.5cm for local findings and endodontic or single implants
Ø8x8cm for lower and upper jaw dentition for multiple implants
Ø11x10cm for complete dentition including wisdom teeth
Ø17x13cm for complete dentition including both Temporomandibular
joints and cranial base.
Modes: Low Dose, Standard and High Definition
3D Sensor: Flat panel detector
2D Sensor: DCS with autofocus function
Scan time: 2-5 sec. or better
Exposure time: 14 sec. or better
Re-construction time: approx. 1.5 min. or better
Visualization time: approx. 4.5 min. or better
Patient position: Standing / sitting
KV range: 60-90 KV
mA range: 3-16 mA
Imaging software: DICOM compatible
Built-in compartment for storage of bite blocks and accessories
Ambient multi-color light system
Software:
Manufacturer’s own Image processing software and storage of
patient data including images. This software should be compatible
with Practice Management Software. It should be capable to Import
DICOM, STL as well as export of DICOM data for 3rd Party software
Built-in metal artifact reduction software
Implant planning software including implant library, Nerve locator
and Reporting
Endodontic software
DICOM printing software to print the images on DICOM Printer
Application for iPad to see the images connected to central database
Dedicated Reconstruction PC original from manufacturer
ACCESSORIES:
Branded Workstation PC with following configurations:
Ci7 Latest Generation, 16GB RAM, 2TB Hard Disk, 2GB Dedicated
Graphic Card & 19” FHD LED Monitor with Keyboard & Mouse
Pure Sine wave Online UPS to take load of X-ray, PC and DICOM
Printer with 10-15 Backup time
DICOM Printer (Laser Imager with 2x Trays)
Film Sizes (inch) 8x10, 10x12, 11x14 & 14x17
(3 Dedicated Sensors: 1x CBCT, 1xPAN & 1xCEPH)
NOTE:
The system should be FDA/CE/JIS/MHLW approved.
03 years with parts and services comprehensive warranty.
Life span of the quoted model should be clearly defined
by the manufacturer.
Technical training as well as operational training must be provided
by the supplier in case if required.
Service manual as well as operational manual must be provide
along with the machine.
PPM Schedule should be share with Biomedical Engineering
Department along with the supply of equipment, which will
include calibration and validation of the equipment.
PNRA Registration will be responsibility of the supplier
TECHNICAL SPECIFICATIONS
Transforaminal Endoscope
Wide Angle Telescope 25°, angled eyepiece, outer diameter 6.6 mm, working channel 3.6 mm, length
25.7 cm, autoclavable, fiber optic light transmission incorporated.
Operating Sheath, graduated, with distal beak, integrated irrigation connector, inner diameter 6.8
mm, outer diameter 7.8 mm, length 25 cm, for use with Telescope.
Operating Sheath, graduated, distal oblique, integrated irrigation connector, inner diameter 6.8 mm,
outer diameter 7.8 mm, length 25 cm, for use with Telescope.
Puncture Needle, including stylet, Ø 1.8 mm, working length 25 cm, with 1.3 mm opening for guide
wire
Guide Wire, blunt, Ø1,1mm, working length 45cm
Dilation Sleeve, outer diameter 6.5 mm, inner diameter 1.4 mm, length 31 cm, with two ports, for the
transforaminal approach.
Plastic Container for Sterilizing and Storage, perforated, with transparent lid, with inserts for two
angeled rigid telescopes, external dimensions (w x d x h): 515 x 240 x 84 mm.
Operating Sheath, graduated, with distal beak, with clamp mechanism for fixation, integrated
irrigation connector, inner diameter 7.2 mm, outer diameter 7.9 mm, length 18 cm, for use with
Telescope 25°.
Operating Sheath, graduated, distal oblique, with clamp mechanism for fixation, integrated irrigation
connector, inner diameter 7.2 mm, outer diameter 7.9 mm, length 18 cm, for use with Telescope 25°.
Puncture Needle, including stylet, Ø 1.8 mm, working length 18 cm, with 1.3 mm opening for guide
wire.
Guide Wire, blunt, Ø1,1mm, working length 31 cm
Dilation Sleeve, outer diameter 6.5 mm, inner diameter 1.4 mm, length 22 cm, with two ports, for the
interlaminar approach.
Plastic Container for Sterilizing and Storage, perforated, with transparent lid, with inserts for two
angeled rigid telescopes, external dimensions (w x d x h): 515 x 240 x 84 mm.
Spine Instruments
Dissector, Ø 2,6 mm, working length 36 cm, distally 45° bended.
Dissector, Ø 2,6 mm, working length 36 cm, distally 90° bended.
Palpation Hook, distally angled 45°, diameter 2 mm, working length 34 cm.
Palpation Hook, rotating, dismantling, not insulated, without connector pin for unipolar coagulation,
with irrigation connector for cleaning, with distal ball, bendable to 90°, size 2.7 mm, length 36 cm
consisting of: Metal Handle, without ratchet, with plastic rings with larger contact area outer Sheath
with Working Insert.
Distal hook, rotatable, single action jaws, size 3.5mm, working length 36cm, consisting of:Plastic
Handle, without ratchet with connector pin for unipolar coagulation, Biopsy forceps insert with distal
hook, working length 36 cm, diameter 3.5 mm.
Grasping Forceps, rotating, dismantling, insulated, with connector pin for unipolar coagulation, with
LUER-Lock-adaptor for cleaning, single action jaws, fenestrated, size 3 mm, length 36 cm, consisting
of:Plastic Handle, without ratchet outer Sheath, with forceps insert.
CLICKLINE Palpation Hook, with distal ball, bendable to 90°, with irrigation connector for cleaning,
diameter 3.5 mm, working length 36 cm, consisting of: Metal Handle, without ratchet outer Sheath
with Palpation Hook Working Insert.
Bipolar Electrode, angled, diameter 2.5 mm, working length 36 cm consisting of: Bipolar Electrode
Insert, Sheath for Bipolar Electrodes Bipolar Spring Handle.
Bipolar High Frequency Cord, length 300 cm
Bipolar High Frequency Cord, length 300 cm,
Take-apart consisting of: Handle, Insert, Spoon Forceps.
Take-apart Grasping Forceps, diameter 2.3 mm, working length 30 cm, consisting of: 28169 A Handle
28063 SE Insert, Grasping Forceps
Grasping Forceps, serrated jaws, diameter 2.3 mm, working length 30 cm, consisting of: Handle,
Insert, Grasping Forceps.
Punch, dismantling, 45° downbiting, not through-cutting, diameter 3.5 mm, working length 30 cm
consisting of:Punch Insert, Outer Sheath, Metal Handle.
Punch, dismantling, 90° downbiting, not through-cutting, diameter 3.5 mm, working length 30 cm
consisting of:Punch Insert Outer Sheath Metal Handle.
Grasp. Forceps, with jaws, with 90° angle of view, Ø 3.5 mm, working length 36 cm Fasszange, ein
Maulteil beweglich
Grasping Forceps, double action jaws, diameter 2.7 mm, working length 36 cm
Trephine, with round handle, inner diameter 3.2 mm, outer diameter 4.2 mm, working length 22 cm.
Trephine, with round handle, inner diameter 7 mm, outer diameter 8 mm, working length 17.5 cm.
Trephine, with pyramidal handle, inner diameter 1.6 mm, outer diameter 2.7 mm, working length 30
cm.
Bipolar High Frequency Cord, length 300 cm.
Punch, bendable, single action jaws, diameter 3.5 mm, working length 36 cm.
Grasping Forceps, bendable, single action jaws, Ø 3.5 mm, working length 36 cm.
Operating Sheath, distal 45° oblique, integrated irrigation adaptor, outer diameter 7.5 mm, inner
diameter 6.8 mm, length 17 cm, for use with Telescope 25°.
Metal Mallet, with plastic replacement head, length 22.5 cm.
Punch Sleeve, for use with operating sheaths.
Fixation Handle, for adjustment of dilation sleeves with outer diamter 2.5 - 6.5 mm.
Plastic Container for sterilization & storage of variable instrument sets, perforated, with transparent
lid, silicone mat, two-level storage, (1 additional insert), external dimensions (wxdxh): 545 x 260 x
115 mm consisting of: 2x snap-in clip, package of 12 2x silicone tie-downs, package of 12 Tool The
plastic containers are suitable for steam, gas and hydrogen peroxide sterilization.
Minimal invasive spine set.
Short Scope
Forward-Oblique Telescope 25°, eyepiece angled 90°, diameter 4 mm, length 6 cm, autoclavable, fiber
optic light transmission incorporated, for use with 4 cm long.
Trocars for Short scope
Trocar, diameter 15 mm, working length 40 mm, for use with Trocar Attachment Telescope Holder
and Forward-Oblique Telescope 25°, 4 mm, 6 cm.
Trocar, diameter 19 mm, working length 40 mm, for use with Trocar Attachment Telescope Holder
and Forward-Oblique Telescope 25°, 4 mm, 6 cm.
Trocar, diameter 23 mm, working length 45 mm, for use with Trocar Attachment Telescope Holder
and Forward-Oblique Telescope 25°, 4 mm, 6 cm.
Medium Scope
Forward-Oblique Telescope 25°, eyepiece angled 90°, diameter 4 mm, length 9 cm, autoclavable, fiber
optic light transmission incorporated, for use with 7 cm long.
Trocars for Medium scope
Trocar, diameter 15 mm, working length 70 mm, for use with Trocar Attachment Telescope Holder
and Forward-Oblique Telescope 25°, 4 mm, 9 cm.
Trocar, diameter 19 mm, working length 70 mm, for use with Trocar Attachment Telescope Holder
and Forward-Oblique Telescope 25°, 4 mm, 9 cm.
Trocar, diameter 23 mm, working length 75 mm, for use with Trocar Attachment Telescope Holder
and Forward-Oblique Telescope 25°, 4 mm, 9 cm.
Long Scope
Forward-Oblique Telescope 25°, eyepiece angled 90°, diameter 4 mm, length 11 cm, autoclavable,
fiber optic light transmission incorporated, for use with 10 cm long.
Trocars for Long scope
Trocar, diameter 15 mm, working length 90 cm, for use with Trocar Attachment Telescope Holder and
Forward-Oblique Telescope 25°, 4 mm, 11 cm.
Trocar, diameter 19 mm, working length 90 mm, for use with Trocar Attachment Telescope Holder
and Forward-Oblique Telescope 25°, 4 mm, 11 cm.
Trocar, diameter 23 mm, working length 95 mm, for use with Trocar Attachment Telescope Holder
and Forward-Oblique Telescope 25°, 4 mm, 11 cm.
Trocars Attachment
Trocar Attachment, diameter 15 mm, for use with Trocars.
Telescope Holder, Ø 15 mm, for use with Trocar Attachment.
Trocar Attachment, diameter 19 mm, for use with Trocars.
Telescope Holder, Ø 19 mm, for use with Trocar Attachment.
Trocar Attachment, diameter 23 mm, for use with Trocars.
Telescope Holder, Ø 23 mm, for use with Trocar Attachment.
MIS Spine Instruments
Dilation Sleeve, graduated, inner Ø 1.5 mm, outer diameter 5.2 mm, length 23 cm.
Dilation Sleeve, graduated, inner Ø 5.3 mm, outer diameter 8.9 mm, length 21 cm.
Dilation Sleeve, graduated, inner Ø 9 mm, outer diameter 12.7 mm, length 19 cm.
Dilation Sleeve graduated, outer Ø 14.9 mm, inner diameter 12.9 mm, length 17 cm.
Dilation Sleeve graduated, outer Ø 16.9 mm, inner diameter 15.1 mm, length 15 cm.
Dilation Sleeve, graduated, inner Ø 17.1 mm, outer diameter 18.9 mm, length 14 cm.
Dilation Sleeve graduated, outer Ø 20.9 mm, inner diameter 19 mm, length 13 cm.
KERRISON Bone Punch, dismantling, 40° upbiting, not through-cutting, 4 mm, working length 24 cm.
KERRISON Bone Punch, dismantling, 40° upbiting, not through-cutting, 2 mm, working length 24 cm.
Spoon Forceps, dismantling, robust, oval, spoon size 3 x 10 mm, single action jaws, WL 20 cm
Spoon Forceps, dismantling, curved 30°, robust, oval, spoon size 3 x 10 mm, single action jaws,
working length 20 cm
Hook Scissors, single action jaws, diameter 2.5 mm, working length 25 cm.
Surgical handle, bayonet-shaped with working length 15 cm for blades.
Bipolar Coagulation Forceps, insulated, bayonet-shaped, tip 1.2 mm, length 23 cm, for use with
Bipolar High Frequency Cords.
Bipolar High Frequency Cord, length 300 cm.
Bipolar High Frequency Cord, length 300 cm.
Bipolar High Frequency Cord, length 300 cm.
Palpation Hook, straight, distally 10 mm long and angled 90°, with ball, working length 20 cm.
Nerve Retractor, angled 30°, distal width 5 mm, working length 17 cm.
Curette, small, curette size (l x w): 2.7 x 4 mm, bajonet-shaped, distal angled 45°, WL 20 cm.
FERGUSON Suction Tube, with cut-off hole and stylet, LUER, diameter 4 mm, working length 15 cm
Suction Tube, with cut-off hole and stylet, LUER, working length 15 cm, 2.5 mm.
Suction Tube, with distal nerve retractor, with cut-off hole, LUER-Lock connector, diameter 2.7 mm,
working length 15 cm.
Rotation Socket to clamp on the operating table with one already mounted butterfly nut 28172 HRS,
for use with European and United States standard rails, with lateral clamping element for height and
angle adjustment of the articulated stand.
Articulated Stand, reinforced version, only, L-shaped, with one mechanical central clamp for all five
joint functions, height 48 cm, operating range 52 cm.
Palpation Hook, diameter 3.8 mm, distally angled 90°, with ball, blunt, working length 20 cm.
Dissector, sharp, tip angled 15°, with round handle, size 2 mm, length 25 cm
KERRISON Bone Punch, dismantling, 90° upbiting, not through-cutting, 4 mm, working length 24 cm.
KERRISON Bone Punch, dismantling, 90° upbiting, not through-cutting, 2 mm, working length 24 cm.
KERRISON Punch, dismantling, bayonet-shaped, fixed, upbiting 40° forward, 2 mm, WL 17 cm.
Bipolar Coagulating Forceps, insulated, bayonet-shaped, tip 0.7 mm, length 23 cm, for use with
bipolar high frequency cord.
Fiber Optic Light Cable, with straight connector, extremely heat-resistant, with safety lock, increased
light transmission, diameter 3.5 mm, length 230 cm, can be used for ICG applications
Plastic Container for sterilizing, suitable for steam, gas, and hydrogen peroxide (Sterrad®)
sterilization and storage, perforated, with lid, external dimensions (w x d x h): 321 x 90 x 45 mm for
use with two rigid endoscopes up to max. 20 cm working length
Plastic Container for sterilization & storage of variable instrument sets, perforated, with transparent
lid, silicone mat, two-level storage, (1 additional insert), external dimensions (wxdxh): 545 x 260 x
115 mm consisting of: 2x snap-in clip, package of 12 2x silicone tie-downs, package of 12 Tool The
plastic containers are suitable for steam, gas and hydrogen peroxide sterilization.
Tray For Complete Set (3 Scopes & 9 Trocars & 3 Attachments)
Wire Tray, for Cleaning, Sterilization and Storage of instruments, stackable, including hole plate wall.s
and foldaway handles, external dimensions (w x d x h): 480 x 250 x 66 mm
Lip for Wire mash tray 480 x 250 mm.
Silicone Grid Insert "Large Diamond Grid", blue, extra wide meshed, external dimensions: (w x d): 470
x 240 mm, for the storage of instruments in standard wire trays, plastic and sterilization containers
12 Fixation post including screw and washer to screw in to Wire tray for fixation of instruments, to be
used with silicone tie-downs. External dimensions W: 9 x 38 mm.
Silicone Tie-Downs for use with posts and Combination Pack with 12 pcs.
Small parts basket
Container with Microstop for sterilization and sterile storage, 600 x 300 x 110 mm, consisting
of:Sterilization Container Bottom Sterilization Container Lid 2 x Germ retention Disc (MicroStop)
Internal dimensions: (w x d x h) 548 mm x 267 mm x 88 mm.
Suction/ Irrigation system
Suction/ Irrigation system, with integrated module, suction and irrigation pump, incl. mains cord,
power supply 100 - 240 VAC, 50/60 Hz.
Neuro Software, License allows for rinsing in the Neuro surgeries
Tubing Set, for single use, package of 10
One-Pedal Footswitch, digital, one-stage
Exo-scope
Exo-scope, with zoom and focus function, integrated illumination and camera orientation correction,
working distance 20 - 50 cm, fiber optic light transmission incorporated, wipe-disinfect able for use
with Camera System
Fiber Optic Light Cable, with straight connector, extremely heat-resistant, enhanced light
transmission, diameter 4.8 mm, length 550 cm
Control device with 3D wheel, 4 programmable Buttons and USB Interface, for intuitive control of
camera systems and connected devices. for use with 3D Exo-Scope
Articulated Stand, reinforced version, only, L-shaped, with one mechanical central clamp for all five
joint functions, height 48 cm, operating range 52 cm, with lock.
Rotation Socket to clamp on the operating table with one already mounted butterfly nut, for use with
European and United States standard rails, with lateral clamping element for height and angle
adjustment of the articulated stand
NOTE:
The system should be FDA/CE/JIS/MHLW approved.
03 years with parts and services comprehensive warranty.
Life span of the quoted model should be clearly defined by the manufacturer.
Technical training as well as operational training must be provided by the supplier in case if
required.
Service manual as well as operational manual must be provided along with the machine.
PPM Schedule should be share with Biomedical Engineering Department along with the supply of
equipment, which will include calibration and validation of the equipment.
56" or Better 4K Monitor, effective max. screen resolution 3840x2180, image format
16:9, power supply 100 - 240 VAC, 50/60 Hz, wall mounting with VESA 100 and 200
adaptor, consisting of: 1x 24VDC power supply, 1x power cord, 1x cable cover, 2x screws
for cable cover, 4x M6 screws for VESA adaptation, on Stand. (Should be from same
manufacturer).
Equipment Cart, wide, high, rides on 4 antistatic dual wheels equipped with locking
brakes, mains switch on cover, central beam with integrated electrical sub-distributors
with 12 sockets, grounding plugs, Dimensions in mm (w x h x d): Equipment cart: 830 x
1474 x 730, Shelf: 630 x 25 x 510, Caster diameter: 150 mm consisting of: Base Module,
equipment cart wide Cover, equipment cart wide, Beam Package, equipment cart high 3x
Shelf, wide, Drawer Unit with Lock, wide 2x Equipment Rail, long Camera Holder.
(Imported from same manufacturer)
NOTE:
The system should be FDA/CE/JIS/MHLW approved.
03 years with parts and services comprehensive warranty.
Life span of the quoted model should be clearly defined by the manufacturer.
Technical training as well as operational training must be provided by the supplier in case if
required.
Service manual as well as operational manual must be provided along with the machine.
PPM Schedule should be share with Biomedical Engineering Department along with the supply of
equipment, which will include calibration and validation of the equipment.
· PPM Schedule should be share with Biomedical Engineering Department along with the
supply of equipment, which will include calibration and validation of the equipment.
NOTE:
The system should be FDA/CE/JIS/MHLW approved.
03 years with parts and services comprehensive warranty.
Life span of the quoted model should be clearly defined by the manufacturer.
Technical training as well as operational training must be provided by the supplier in case
if required.
Service manual as well as operational manual must be provided along with the machine.
PPM Schedule should be share with Biomedical Engineering Department along with the
supply of equipment, which will include calibration and validation of the equipment.
Clinical
Ophthalmology
Specialty
Generic Corneal Topography System
Name
Clinical A corneal topography test is quick and painless. During the test, you will sit in front of a lighted
Purpose bowl that contains a pattern of rings, and rest your head against a bar. A series of data points will
be collected, and a color coded image of your corneal shape will be generated on a computer
screen.
TECHNICAL SPECIFICATIONS
Rotating Scheimpflug Camera for Anterior Segment Tomography
The instrument is a Scheimpflug camera which captures Scheimpflug images during a
rotating scan and calculates a 3D model of the anterior eye segment. Important
parameters such like anterior and posterior corneal curvature, total corneal power,
pachymetry, chamber depth, 360o chamber angle, and lens densitometry are calculated
automatically. The non-contact measuring process takes only 1 – 2 seconds and
captures up to 50 single Scheimpflug images (depending on selected scanning mode).
True elevation points are detected and processed to a 3D model of the anterior eye
segment. Its automatic alignment systems accounts for easy operation and repeatable
results.
Rotating Scheimpflug Camera for anterior segment tomography includes:
Measuring head on XYZ movable base
Basic software package
Patient data management software, network compatible
Head and chinrest
Windows based software, network compatible
Power supply unit input 100 – 240 volt, output 5A 1A, power cord
USB cable
Operators manual, user guide and interpretation guideline, 2nd edition
Dust cover
Basic Software
Scheimpflug image, Scheimpflug images overview
General overview, Corneal topography, ant. & post.
Pachumetry, absolute & relative
Elevation map, ant. & post, 4 maps refractive
Virtual eye, Iris image & automatic HWTW
3D chamber analyzer, Tomography
Topometric, topography based keratoconus detection
Compare 2 exams
Compare 2 exams Scheimpflug images
Indice report.
NOTE:
The system should be FDA/CE/JIS/MHLW approved.
03 years with parts and services comprehensive warranty.
Life span of the quoted model should be clearly defined by the manufacturer.
Technical training as well as operational training must be provided by the supplier in case
if required.
Service manual as well as operational manual must be provided along with the machine.
PPM Schedule should be share with Biomedical Engineering Department along with the
supply of equipment, which will include calibration and validation of the equipment.
Optical biometry is a highly accurate non-invasive automated method for measuring the
anatomical characteristics of the eye. Accurate measurements are critical for determining the
correct power of an IOL before it is implanted during cataract surgery.
TECHNICAL SPECIFICATIONS
SWEPT Source Biometer for non-contact measurement and visualization of axial length of the eye,
corneal curvature and thickness, anterior chamber, lens, retina, pupil and “white to white” with
an integrated PC for the calculation of intraocular lenses and calculation of intraocular lenses
after corneal refractive surgery. Data export possible to a PC or to office management
systems. DIOCOM Gateway which provides additional networking features to EMR systems
(option) included:
Measurement range:
Axial length 14 – 38 mm
Corneal radii5 – 11 mm
Anterior chamber depth 0.7 – 8 mm
Lens thickness 1 – 10 mm (phakic eye)
0.13 – 2.5 mm (pseudophakic eye)
Central corneal thickness 0.2 – 12 mm
White to white 8 – 16 mm
Display Scaling:
Axial length 0.01 mm
Corneal radii 0.01 mm
Anterior chamber depth0.01 mm
Lens thickness 0.01 mm
Central corneal thickness 1 µm
White to white 0.1 mm
SD of repeatability:
Axial length 9 µm
Corneal radii 0.07 D
Cylinder >0.75 D axis 4.5o
Anterior chamber depth 10 µm
Lens thickness 19 µm
Central corneal thickness 2 µm
Central corneal thickness 2 µm
White to white 90 µm
IOL Calculation Formulas:
HaigisSuite (includes Haigis, Haigis-L (for eyes following myopic / hyperopic LASIK / PRK
/ LASEK, Haigis-T (for toric IOL power calculation), Hoffer Q, Holladay 2, SRK/T
Interfaces:
FORUM eye care data management system
Computer-assisted cataract surgery system CALLISTO eye (via USB & FORUM)
Data interface for electronic media` record (EMR) / patient management systems (PMS)
Data export to USB storage media
Ethernet port for network connection and network printer with:
Motorized instrument stand.
NOTE:
The system should be FDA/CE/JIS/MHLW approved.
03 years with parts and services comprehensive warranty.
Life span of the quoted model should be clearly defined by the manufacturer.
Technical training as well as operational training must be provided by the supplier in case
if required.
Service manual as well as operational manual must be provided along with the machine.
PPM Schedule should be share with Biomedical Engineering Department along with the
supply of equipment, which will include calibration and validation of the equipment.
NOTE:
The system should be FDA/CE/JIS/MHLW approved.
03 years with parts and services comprehensive warranty.
Life span of the quoted model should be clearly defined by the manufacturer.
Technical training as well as operational training must be provided by the supplier in
case if required.
Service manual as well as operational manual must be provided along with the machine.
PPM Schedule should be share with Biomedical Engineering Department along with the
supply of equipment, which will include calibration and validation of the equipment.
50MHZ Probe for Anterior chamber analysis, including structure behind iris up to the Posterior
capsule of the lens linear Probe featuring a linear scanning for completer visualization of the
Anterior chamber in one single scan.
General:
Image Rendering Outstanding B-Scan and UBM image quality using proprietary Enhanced
Focus Rendering (EFR)Continuous interpolative zoom re-renders at each magnification
level for optimized image quality (up to 4x zoom)
Annotation Automatic annotation of images and video clips
Database Full-scale patient database with exam record storage
Create and save individual user profiles with user-selectable defaults
Reports Detailed customizable exam reports for printing or exporting
Hard Drive 128 GB SSD solid-state drive
Connectivity 802.11n dual-band Wi-Fi and Bluetooth 4.0
GigE Ethernet LAN and USB 3.0 ports
One touch export images (.jpg), video clips (.avi), and exam reports (.pdf) for referral,
presentation, or EMR
Printer Any Windows-compatible printer
Operating System Microsoft Windows 8
Console Compact and streamline design with 10.1” high-resolution
multi-touch monitor (1280 x 800 pixel)
VESA bracket for articulating arm
Power 240 VAC, 60 Hz auto-switching medical-grade power supply
With Compatible Laser Printer
NOTE:
The system should be FDA/CE/JIS/MHLW approved.
03 years with parts and services comprehensive warranty.
Life span of the quoted model should be clearly defined by the manufacturer.
Technical training as well as operational training must be provided by the supplier in case
if required.
Service manual as well as operational manual must be provided along with the machine.
PPM Schedule should be share with Biomedical Engineering Department along with the
supply of equipment, which will include calibration and validation of the equipment.
NOTE:
The system should be FDA/CE/JIS/MHLW approved.
03 years with parts and services comprehensive warranty.
Life span of the quoted model should be clearly defined by the manufacturer.
Technical training as well as operational training must be provided by the supplier in case
if required.
Service manual as well as operational manual must be provided along with the machine.
PPM Schedule should be share with Biomedical Engineering Department along with the
supply of equipment, which will include calibration and validation of the equipment.
Clinical
Ophthalmology
Specialty
Generic
Vitrectomy System
Name
Clinical During vitrectomy procedures, a surgeon removes some or all of the vitreous humor within a
Purpose patient's eye.The endolaser is most commonly used to create a laser barricade around retinal
tears, surround retinectomy edges or giant retinal tear margins, and deliver scatter panretinal
photocoagulation. For retinal tears, the goal is to achieve 360º of laser encircling the tear.
TECHNICAL SPECIFICATIONS
Fluidic System with three pump modes (Peristaltic Pump, Venturi Pump and SPEEP mode).
Gravity and Active GFI infusion.
Tubing system with integrated closed pressure sensor,
Auto Venting and limitable back flow functions.
Dualinear wireless multifunctional pedal also controlling the integrated laser and specific
assignment.
Easy phaco", CO-MICS and MICS technology with CMP, Pulse, Burst and Linear functions.
Hexadisq Phaco hand piece with 6-piezo plates. functions. 23G, 25G) with linear or progressive
Pneumatically driven Continuous Flow Cutter (20G, 10 to 10000 cut per minute.
Endo Illumination with two independent Goodlight LED and goodlight LED plus source with
adjustable colors' filter free exit and antiglare panoramic lighting. activation with alarm function
and constant Fluid/air changeover via panel or pedal pressure control with compensation
reservoir.
Visco Injection/Extraction by linear pedal control.
RF-Capsulotomy for difficult cases. (Special feature marks)
HFDS (High frequency Deep Sclerotomy) Option for ab interno MIGS (Micro Incision
Glaucoma Surgery) Built in integrated green endo laser 532 nm controlled without extra pedal.
Endo phaco.
NOTE:
The system should be FDA/CE/JIS/MHLW approved.
03 years with parts and services comprehensive warranty.
Life span of the quoted model should be clearly defined by the manufacturer.
Technical training as well as operational training must be provided by the supplier in case
if required.
Service manual as well as operational manual must be provided along with the machine.
PPM Schedule should be share with Biomedical Engineering Department along with the
supply of equipment, which will include calibration and validation of the equipment.
6.12: OPERATING MICROSCOPE WITH VIDEO ATTACHMENT BIOM WITH CO-OBSERVATION FOR
POSTERIOR SEGMENT SURGERIES
Clinical Specialty Ophthalmology
Generic Name Operating Microscope
Clinical Purpose An operating surgical microscope is the most important optical instrument in the modern era of ophthalmic
surgeries. It provides the surgeon with a magnified and illuminated high-quality image of the small
ophthalmic structures.
TECHNICAL SPECIFICATIONS
Microscope head / Optical carrier with:
Linear motorized zoom ratio 1:6
Motorized fine focusing
Stereo coaxial SCI fiber optic illumination system or equivalent
Retinal protection device
Fully apochromatically corrected optics with high light transmission
Microprocessor controlled Depth of Focus management system “Deep View” or equivalent
Fine tilt adjustment of the microscope body
Motorized XY coupling with auto re-centering
Objective f=200mm
Inclinable binocular tube with integrated inverter or as per manufacturer
Wide field eyepieces 10X with dioptric adjustment
Dust cover
Asepsis set
Mobile Floor Stand with:
Manual coarse focusing through counterbalanced suspension arm
Source for fiber or without fiber optic halogen illumination 12V 100W or as per manufacturer with
integrated stand-by lamp
with integrated stand-by lamp
Adjustable speed of focus, zoom and XY movement
Multi-function foot control panel, wired
Binocular stereoscopic assistant’s attachment with joints for
Binocular stereoscopic assistant’s attachment with joints for inclination, image erection, inclinable
binocular tube with integrated inverter and wide field 10X eyepieces with dioptric adjustment or as per
manufacturer was added in the specifications
1-Chip HD Video Camera
Beam Splitter
Non-Contact Retinal Viewing System consisting of
BIOM 5 / Resight 700 or Equivalent
Adapter for above Microscope
Reduction lens f-200
90 D lens
Wifi HD lens
NOTE:
The system should be FDA/CE/JIS/MHLW approved.
03 years with parts and services comprehensive warranty.
Life span of the quoted model should be clearly defined by the manufacturer.
Technical training as well as operational training must be provided by the supplier in case if required.
Service manual as well as operational manual must be provided along with the machine.
PPM Schedule should be share with Biomedical Engineering Department along with the supply of equipment, which will include
calibration and validation of the equipment.
6.13 PATTERN LASER WITH SLIT LAMP DELIVERY SYSTEM AND VIDEO
ATTACHMENT
Clinical
Ophthalmology
Specialty
Generic Name Pattern Laser with Slip Lamp
Clinical Purpose Pattern Scan Laser refers to a laser delivery system where multiple laser spots of short
pulse duration are delivered in a preset pattern. These pattern scan laser systems were
developed to decrease the treatment times for diabetic retinopathy, especially pan-retinal
photocoagulation.
TECHNICAL SPECIFICATIONS
Laser Source: Solid-state laser diode and cavity
Wavelength: Yellow configuration: 561nm
Power at the Cornea: Yellow: 50 -1500mW,
Exposure Time: Pattern: 10, 20, 30, Single Spot: 0.01 to 8.0 seconds
Patterns:
Linear (2 to 7 spots) or better
Rectangle (2x3, 2x4, 2x5, 2x6, 2x7)
Square (2x2, 3x3, 4x4, 5x5, 6x6)
Triangle (3, 6, 10, 15, 21 and 28 spots)
Circle – filled (7, 12, 19, 27 and 37 spots)
Circle – empty (12, 18, 24 and 30 spots)
Single Half Circle (4, 7 and 10 spots)
Double Half Circle (11, 17 and 23 spots)
Circle Sector 60 (3 to 7 spots)
Circle Sector 120 (5, 7, 9 and 11 spots)
Double Circle Sector 60 (5, 7, 9 and 11 spots)
Double Circle Sector 120 (8, 12, 16 and 20 spots)
Variable curve, double curve and filled sector
Spot Size Pattern: 100 to 500 µm, continuously variable
Single Spot: 50 to 1000 µm, continuously variable
Spot Spacing Pattern: 0 (touching),
0.25, 0.5, 0.75, 1.0, 1.25, 1.5, 1.75, 2.0 spot-width
Pulse Duration: Pattern: 10, 20, 30 ms
Single Spot: 10 – 8000 ms
Repeat Model: Pattern: N/A, Single Spot: 50 – 1000 ms
Aiming Beam: Red 635nm, adjustable intensity
Magnification: 6x, 10x, 16x, 25x, 40x
Cooling: Air Cooled
With: Original Slit Lamp stand with column and table
Beam splitte
Video adapter with camera
NOTE:
The system should be FDA/CE/JIS/MHLW approved.
03 years with parts and services comprehensive warranty.
Life span of the quoted model should be clearly defined by the manufacturer.
Technical training as well as operational training must be provided by the supplier in case if required.
Service manual as well as operational manual must be provided along with the machine.
PPM Schedule should be share with Biomedical Engineering Department along with the supply of equipment,
which will include calibration and validation of the equipment.