Professional Documents
Culture Documents
Product Appearance
Display 16:9 , Wide active matrix; Glare type 1280 x 720 HD IPS
GFF Touch panel (Directly Bonding): Capacitive touch panel with 10 points multi-touch with 60ms
response time, IPS, GFF, cover glass source: 1st souce: NEG T2X-1 CS; 2nd source: GGVP TP color:
White
Dimensions X:Y:Z=76.2 : 155.66 : 7.85
Weight 150g (TBD)
Sensor 1. Accelerator 2. E-Compass 3. Proximity 4. Ambient light sensor5. Gyroscope6. Hall sensor
Fingerprint
Support, front
recognition
WLAN Integrated 802.11b/g/n; WiFi-Direct
Bluetooth V 4.1 (EDR + A2DP)
Bluetooth
Bluetooth Profile: A2DP + AVRCP + HID + PAN + OPP
FM Radio Support
GPS Support GPS, aGPS, Gloness
interface Mirco USB Audio jack(Set on): Head phone (iphone type)
Front double CAMERA : F2.0 20M FF OV20880-4C + 8M F2.2 Wide angle120° optical
Front Camera
compatible CAMERA: 13.0M FF;
Main Camera F2.2 16M AF OV&SAMSUNG ; 13.0M AF;
Flash LED Front and rear single flash
Audio Codec integrated into PMIC Build-in
Microphone Microphone*2 (one for de-noise)
Dual Sim Dual Standby (Nano-SIM slot*2) support DSDS 4G+3G (Sim1, Sim2 support LTE
SIM
Compatible),SIM Tray Keep Nano SIM*2+micro SD 3select3
Button Power and Volume Up/Down
Adaptor 5W adapter
Note Charging LED
SW Support VoLTE/VoWiFi (launch plan)
Charger Charging LED must be included, JEITA, USB-ACA standard supported
Remark All follow ASUS standard, OTG
1 Battery Check voltage with Multimeter Value must Replace if found faulty
be 3.6V DC or above
2017-06-07 ZD553KL - 10 -
ASUS L2 Service Manual
8:Front Camera
SN Possible Cause Validation steps Action
2017-06-07 ZD553KL - 11 -
ASUS L2 Service Manual
9:Rear Camera
SN Possible Cause Validation steps Action
2017-06-07 ZD553KL - 12 -
ASUS L2 Service Manual
10:Playing Video
2017-06-07 ZD553KL - 13 -
ASUS L2 Service Manual
11:Vibrator
SN Possible Cause Validation steps Action
Vibrate assemble issue Reassemble it
Vibrating is not
1 SW issue Flash the handset with latest SW
properly
Main FPC issue Re-assembly Main FPC or change it.
Soldering issue Resolderingit
PCBA issue Re soldering FPC connector or change it
2 NO vibrate
Vibrate SUB issue Re-assembly Vibrate SUB PCBA
PCBA issue Refer to L3 service
3 Vibrate weakly Vibrate issue Changeit
2017-06-07 ZD553KL - 14 -
ASUS L2 Service Manual
12:WiFi/BT/GPS
2017-06-07 ZD553KL - 15 -
ASUS L2 Service Manual
13:RF Network
SN Possible Cause Validation steps Action
SW issue Flash the handset with latest SW
RF antenna issue Re-assemble or Change it
SIM socket is fail Re-Solder or Change it
RF Network cannot
1 Some dust with RF Slot Clean it
Search able
RF Coaxial line issue Re-assemble or Change it
Rf connector issue Re-Solder or Change it
PCBA fail Change PCBA
2017-06-07 ZD553KL - 16 -
ASUS L2 Service Manual
14: FM/ Earphone
SN Possible Cause Validation steps Action
SW issue Flash the handset with latest SW
Earphone is fail Change Earphone
FM antenna fail Re-Solder or Change earphone connector
PCBA fail Change PCBA
Validation steps Action
1 Can not turn on FM
SW issue Flash the handset with latest SW
Earphone is fail Change Earphone
PCBA issue Refer to L3 service
Earphone connector Re-Solder or Change it
Having poor soldering
2017-06-07 ZD553KL - 17 -
ASUS L2 Service Manual
15:Receiver
2017-06-07 ZD553KL - 18 -
ASUS L2 Service Manual
16:Speaker
SN Possible Cause Validation steps Action
Speaker with dust Clean speaker
1 Noise/crack Speaker foam issue Re-assemble or Change SPK
Speaker issue Change speaker
Assemble issue Assemble again
SW issue Flash the handset with latest SW
Speaker issue Re-assemble or Change Main FPC
2 No volume
Speaker issue Re-Solder or Change Main FPC
connector
Speaker issue Re-Solder or Change SPK FPC
Assemble issue Assemble again
Man-made causes Reset the value of volume
3 Low volume
Speaker issue Change it
Audio PA issue Refer to L3 repair
2017-06-07 ZD553KL - 19 -
ASUS L2 Service Manual
17:Battery
SN Possible Cause Validation steps Action
3 Can not charge fully Some dust with Battery goldencolor Clean goldencolor point
point
PCBA issue Change PCBA
Battery connector issue Change battery connector
2017-06-07 ZD553KL - 20 -
ASUS L2 Service Manual
18:Open TP(Reference 1)
Operating procedures Description of the procedure
1.Remove the motherboard and battery 1. Take maintenance need to remove the TP surface
shell components, placed in a heating fixture for 2
minutes after heating out. Note that the temperature
2. Into the heating fixture plus heating of the heating fixture is designed between 100 and
110 degrees(Figure 1).
Figure 2
Figure 1
2017-06-07 ZD553KL - 21 -
ASUS L2 Service Manual
18:Open TP(Reference 2)
Operating procedures Description of the procedure
1.Remove the motherboard and battery 1. Heat the gun with hot air gun for about 2 minutes,
pay attention to the temperature at 100 ± 10
℃(Figure 1).
2017-06-07 ZD553KL - 22 -