Professional Documents
Culture Documents
Literatura
1. Adas, M., ed. (1993). Islamic & European expansion: the forging of a
global order. Temple University Press.
3. Avdic, V., Muminovic, A.J., Pervan, N., Tasic, P., Zecevic, S. (2013).
Different Design Solutions of Solar Trees in Urban Environment.
Proceedings of 2nd Green Design Conference, Sarajevo, Bosnia and
Herzegovina.
4. Avdic, V., Muminovic, A.J., Pervan, N., Tasic, P., Zecevic, S. (2013).
Implementation of the Project “Solar tree” in Sarajevo. Proceedings
of 2nd Green Design Conference, Sarajevo, Bosnia and
Herzegovina.
179
Literatura
12. Coelho, D.A. (ed.). (2011). Industrial Design - New Frontiers. InTech
Open Access Publisher.
15. Forty, A. (1992). Objects of Desire: Design and Society Since 1750.
Thames Hudson.
17. Ghoumari, M. Y. El., Daif, A., Moulouki, R., Jihal, H., Azzouazi, M.
(2018). Architectural Design of Trust Based Recommendation System
in Customer Relationship Management. Periodicals of Engineering
and Natural Sciences, 6(2), 380-388.
19. Gomes, A., Rangel, B., Carneiro, V., Lino, J. (2018). Learning by
Doing Integrated Project Design in a Master Program on Product
and Industrial Design. In M. M. Nascimento, R. A. Gustavo, and A.
M. Eva Virgínia (Eds.), Contributions to Higher Engineering
Education, Singapore: Springer.
180
Literatura
20. Hassan, A.Y. (1976). Taqi al-Din and Arabic Mechanical Engineering.
34–35. Institute for the History of Arabic Science, University of
Aleppo.
23. Ho, C., Lu, Y., Chen, C. (2016). Influence of Curvature and Expertise
on Aesthetic Preferences for Mobile Device Designs. International
Journal of Design, 10(3), 17-25.
24. Hunter, E. (2018). What is the Difference between Product Design &
Industrial Design. http://michaelaldridge.com/the-difference-
product-design-industrial-design/
30. Mayall, W.H. (1967). Industrial Design for Engineers. London: Iliffe
Books, 1967.
181
Literatura
37. Muminovic, A.J., Braut, S., Muminovic, A., Saric, I., Stimac
Roncevic, G. (2020). Improvement of flexible rotor/active magnetic
bearings system performance using pi-d control. Engineering
Review, 40 (2), 112 - 123.
38. Muminovic A.J., Colic M., Mesic E., Saric, I. (2020). Innovative
design of spur gear tooth with infill structure. Bull. Pol. Ac.: Tech.
68(3).
39. Muminovic, A.J., Muminovic, A., Mesic, E., Saric, I., & Pervan, N.
(2019). Spur Gear Tooth Topology Optimization: Finding Optimal
Shell Thickness for Spur Gear Tooth produced using Additive
Manufacturing. TEM Journal, 8(3), 788-794.
40. Muminovic, A.J., Saric, I., Mesic, E., Pervan, N., Delic, M. (2019).
Research about characteristics of designs from industrial designers
and product designers. Periodicals of Engineering and Natural
Sciences, 7(2), 860-869.
41. Muminovic, A.J. Saric, I., Repcic, N. (2011). Software for deformity
and stress condition of 2D truss beams analysis. Annals of DAAAM
for 2011 & Proceedings of the 22nd International DAAAM
Symposium, 1225-1226.
182
Literatura
42. Na, J., Choi, Y., Harrison, D. (2017). The Design Innovation
Spectrum: An Overview of Design Influences on Innovation for
Manufacturing Companies. International Journal of Design, 11(2), 13-
24.
44. Pahl, G., Beitz, W., Feldhusen, J., Grote, K.-H. (2007). Engineering
Design A Systematic Approach. London, Springer-Verlag London.
47. Pedgley, O., Sener, B., Lilley, D., Bridgens, B. (2018). Embracing
Material Surface Imperfections in Product Design. International
Journal of Design, 12(3), 21-33.
48. Pervan, N., Muminovic, A.J., Mesic, E., Hadziabdic, V., Delic, M.
(2020). Design and Kinematic Analysis of the Car Jack. TEM Journal,
9(3), 924 – 928.
50. Pervan, N., Muminovic, A.J., Mesic, E., Colic, M., Hadziabdic, V.
(2020). Dimensional Structural Mass Optimization of a Welded I-
Profile Bridge Crane Girder. Tehnical Journal, 14(2), 186 – 193.
183
Literatura
56. Reid, W. (1976). Weapons Through the Ages. New York: Crescent.
58. Saric, I., Muminovic, A., Delic, M., Muminovic, A.J. (2020).
Development of integrated intelligent CAD system for calculation,
designing and development of bridge crane. Journal of Applied
Science and Engineering, 23(2), 349-355.
60. Saric I., Smajic J., Muminovic A.J. (2020). Integrated Development
and Design of Gears Reduction Drive. In: Karabegović I. (eds) New
Technologies, Development and Application III. NT 2020. Lecture
Notes in Networks and Systems, vol 128. Springer, Cham.
61. Saric I., Muratovic E., Music H. (2020). Modeling, Analysis and
Simulation of Work for the Punching and Cutting Operations on
Inner Plate of the Front Car Door. In: Karabegović I. (eds) New
Technologies, Development and Application III. NT 2020. Lecture
Notes in Networks and Systems, vol 128. Springer, Cham.
184
Literatura
62. Saric, I., Muminovic, A.J. (2018). Product Development and Design.
Sarajevo, BiH: Faculty of Mechanical Engineering.
63. Saric, I., Pervan, N., Muminovic, A., Colic, M. (2018). Development
of Integrated Intelligent Cad System for Design of Shafts. Technical
Gazette, 25(1), 99-104.
69. Zhai, L.-Y., Khoo, L.-P., Zhong, Z.W. (2009). Design Concept
Evaluation in Product Development Using Rough Sets and Grey
Relation Analysis. Expert Systems with Applications, 36(3-2), 7072-
7079.
185