You are on page 1of 1

All Dimension Are In Meter

HUME PIPE CULVERT 6X900 MM DIA


Formation Width
CL
0.40 Carriageway RW1
P.C.C. Head Wall LW1 0.50
FORMATION
HEAD WALL
LEVEL
0.40 0.50
0.60 H1 H2

R.C.C R.C.C R.C.C


0.9 SLOPE 1:1000 NP3 Pipe NP3 Pipe NP3 Pipe
Bed Level Bed Level 0.20 1.1 0.50 1.1 0.50 1.1 0.50 1.1 0.50 1.1 0.50 1.1 0.20
0.30 0.30
0.45 1.50 Compacted Granular 3.00 1.10 0.9 0.9 0.9 0.9 0.9 0.9
0.15 Material or P.C.C. M-15 NP4 PIPE Bed Level Bed Level
Brick Masonary In cm 1:3 or 1.25 CL 1.40 150 MM THICK 0.40
1.40 P.C.C. M-15
0.56
Coursed Rubble Masonry 0.16
In cm 1:3 or P.C.C SECTION A-A Compacted Granular
Material or P.C.C
M - 15
SECTION B-B

C.Symmetry
300 mm Thick Dry Stone /
Brick Revetment Overfilter
Formation Width Granular Meterial Bricking
150 mm Thick
Carriage Way

300 mm Thick Dry 0.40


Stone / Brick

B
Revetment Overfilter Head Wall Head Wall 0.40
Granular Meterial 2.29 P.C.C (M-15)
0.60
Bricking 150 mm Thick
0.40 0.10

0.40 0.9 0.9

0.10
0.65
1.25

300 mm Thick Dry 0.15 1.40 Lean Conc.


Stone / Brick (M-15)
Pitching For Apron DETAIL OF HEAD WALL

300 mm Thick Dry


Stone / Brick
Pitching For Apron

19.70
C.Symmetry
A A

0.40
0.40
NOTE :-

2.30 Pillar For Inscribing Structure 2.30 1. All Dimensions & Levels are in Meter.
Number In Coursed Rubble 2. Only written Dimension are to be followed,
Masonry in c.m. 1:3 or P.C.C. M-15 do not scale the dimensions.
B

3. Loose / Unsuitable soil below culverts


is replaced with suitable granular metal.
3.00 4. Chainage / Formation Level is provided
2.30 as per approved plan & profile.
5. For Culverts skew to the traffic direction
length of culvert shall be adjusted as per
site condition.
6. Longitudinal slope of pipe shall be Min. 1 In 1000
7. First class bedding can be used for maximum
height of fill of 4.0 m.
8. The finished road level shall be verified with
alignment drawing & ground level with site
PLAN conditions before execution.

You might also like