You are on page 1of 1

Roll No.

___________
Pandit Deendayal Energy University
Internal Assessment – I (Jul-Dec-21)
Program Name: B. Tech. Petroleum engineering
Semester –VIIth

Date: 13.9.21
Course Name : Integrated Reservoir Management Time: 90Min
Course Code : 17 BPE402 Max. Marks:30
Instructions:
1. Do not write anything other than your roll number on question paper.
2. Assume suitable data wherever essential and mention it clearly.
3. Writing appropriate units, nomenclature, and drawing neat sketches/schematics wherever required
is an integral part of the answer.
-------------------------------------------------------------------------------------------------------------------------------
Attempt all the questions?

Qns No Questions Marks Cos

1. a.) A well is producing at the rate of 1200 BOPD since inception of


completion of well. The production rate of the well was again tested and
rate found about 1000BOPD after one year. Find the cumulative production 5 CO1
of the well.
b.) Also find the initial oil in place if oil formation volume factor is 1.20 V/V,
total compressibility factor of oil and water is 3.5x10-6 /psi. The pressure at
the decline time is 1200 psi at the end of the year and current pressure is 5 CO1
500psi.

2. a.) Suppose you need to develop the concepts for new field development 5 CO3
project being an operator. Discuss all your initiatives under the adequate
Reservoir Management strategy for field project development.
b.) Discuss the salient points of Geophysical inputs for detailed reservoir
characterization for field development. 5 CO4

3. Define and discuss any two of the following?

a. Synergy Team Approach 5x2 CO6

b. Fractional volumetric sweep for gas reservoir in CO2


contact of the aquifer support
CO4
c. MB a concept

You might also like