Professional Documents
Culture Documents
Parameter ID
SPIWEIGHT
Value Range
0 to 100
Parameter Setting
See L st of GBR, we ght and resource l m t ng rat o for SP
Relevant Commands
Set the parameter through SET MACHSSP PARA (BTS3812E, BTS3812A, BTS3812AE,
BBU3806, BBU3806C), and query it through LST MACHSSP PARA (BTS3812E,
BTS3812A, BTS3812AE, BBU3806, BBU3806C).
Parameter ID
SPIRSCRATIO
Value Range
0 to 100
Parameter Setting
Refer to the maximum transmit power for a single link when the GBR is the same as the bearing
rate of R99 services. Huawei's current benchmark for maximum transmit power of a single link
is as follows: -8 dB (1.6%) for 8 kbit/s, -6 dB (2.5%) for 16 kbit/s, -2 dB (6.3%) for 64 kbit/s,
0 dB (10%) for 128 kbit/s, 2 dB (15.8%) for 256 kbit/s and 4 dB (25%) for 384 kbit/s.
Relevant Commands
Set the parameter through SET MACHSSP PARA (BTS3812E, BTS3812A, BTS3812AE,
BBU3806, BBU3806C), and query it through LST MACHSSP PARA (BTS3812E,
BTS3812A, BTS3812AE, BBU3806, BBU3806C).
12.3.1 AG Threshold
If the SG of requested rates and that of current rates are greater than this threshold, then the AG
can be sent to the UE.
12.3.2 Average Rate Initial Value
It is the initial value of calculated average rate.
12.3.3 GBR Schedule Switch
If the switch is on, whether the user real rate is GBR rate needs to be affirmed during the GBR
user scheduling. The scheduling algorithm ensures the GBR rate for GBR users without
considering the uplink load.
12.3.4 Sort Rate Weight
This is the weight of rate for priority calculation.
12.3.5 Sort Rate RSN Weight
This parameter is the RSN weight for priority calculation.
12.3.1 AG Threshold
If the SG of requested rates and that of current rates are greater than this threshold, then the AG
can be sent to the UE.
Parameter ID
AGTHRESHOLD
Value Range
0 to 31
Parameter Setting
The default value is 3.
Relevant Commands
On the NodeB LMT, set or modify this parameter through SET MACEPARA (BTS3812E,
BTS3812A, BTS3812AE, BBU3806, BBU3806C), and query it through LST MACEPARA
(BTS3812E, BTS3812A, BTS3812AE, BBU3806, BBU3806C).
Parameter ID
RAVGINITVALUE
Value Range
0 to 1400
Parameter Setting
The default value is 16 kbit/s.
Relevant Commands
On the NodeB LMT, set or modify this parameter through SET MACEPARA (BTS3812E,
BTS3812A, BTS3812AE, BBU3806, BBU3806C), and query it through LST MACEPARA
(BTS3812E, BTS3812A, BTS3812AE, BBU3806, BBU3806C).
Parameter ID
GBREnable
Value Range
0, 1
Parameter Setting
The default value is OPEN.
Relevant Commands
On the NodeB LMT, set or modify this parameter through SET MACEPARA (BTS3812E,
BTS3812A, BTS3812AE, BBU3806, BBU3806C), and query it through LST MACEPARA
(BTS3812E, BTS3812A, BTS3812AE, BBU3806, BBU3806C).
Parameter ID
WRATE
Value Range
0 to 10
Parameter Setting
5
Relevant Commands
Set the parameter throughSET MACEPARA (BTS3812E, BTS3812A, BTS3812AE,
BBU3806, BBU3806C), and query it through LST MACEPARA (BTS3812E, BTS3812A,
BTS3812AE, BBU3806,BBU3806C).
Parameter ID
WRSN
Value Range
0 to 10