Set. The six pages in this set will construct five full color buildings that will give you just a taste of our new and improved Vyllage-On-The-Cheep™. This set contains over 50 buildings and over 100 stand-up characters from our popular and best selling Vyllage- On-The-Cheep™ Cardstock Building Set. All of the buildings have been improved from our original release, with many completely redesigned, and all rendered in realistic color. The package also includes PLEASE NOTE: new doors, windows and signs so a single building Each item has been marked with a series of Grey can be converted into other structures and businesses Lines that are an indicator that these lines are Fold or to create a huge fantasy gaming environment for Score lines. All Tabs which are to be glued to hold the hours of enjoyment. structures together are marked with a capital letter (G). Unless otherwise noted, all Glue Tabs fold inwards to DISCLAIMER the structure. We have made every effort to make sure that all parts fit together properly, but sometimes tolerances SOME GENERAL CONSTRUCTION NOTES: are tight and mistakes do happen. Test fit all pieces Most of the pieces in this set will construct using before applying glue. Some trimming may be the box method. Cut out and score the building as required. indicated and fold into a box shape and glue the last Before photocopying or printing these pages on tab to the inside to close. If the building sides are in cardstock, you may wish to assemble a test copy on two pieces, glue the two together to form one long plain paper to better understand the construction. A strip before folding into a box. To attach a roof, fold minimum of 65# cover stock is recommended for down the tabs along the roof peaks of a building, constructing the final models. Regular 20 lb. bond apply glue, and set the roof in place. Some roofs are paper can be used, but these items were designed for a two pieces. Glue the two sides together using the tab heavier stock for extra durability and coloring. on the one side. Be sure that the roof tile pattern is running down the roof from the center. Other pieces Tools Required: in this set will assemble as stand-ups. To construct, Scalpel or sharp-bladed hobby knife fold the piece into a triangular shape and glue one of Metal ruler or straight-edge the bottom “feet” on top of the other. Instructions for Cutting surface - a self-healing cutting mat is other pieces will be given in the instructions for that recommended, but a sheet of corrugated cardboard or particular building. even heavy poster board will work as well. Glue - white glue, glue stick or wax stick. Double THE VYLLAGE CRYER sided cellophane tape also works well. Rubber cement Cut out and score the building section as indicated. can be used, but will sometimes stain the cardstock or Start with the front panel (the one with the door on it) make it more difficult to color. and fold to match the angles on the left side wall. Glue the tabs to the inside. When dry, repeat for the left A Note About Using White Glue side wall. When this section is dry, fold over the rear White glue contains a good deal of water. Too wall and glue the tab to the inside. To attach the roof, much glue will warp the card stock so that its almost fold down all tabs along the top of the building, apply unusable. Warping may also cause the parts to fit glue and attach the roof. The long narrow sign can be together incorrectly. If you use white glue, put a very attached to the area above the door while the bulletin thin coat on the glue tabs - the thinner the better. You board can be attached to any wall as desired. Fold the can use a cotton swab or your finger to spread the large, free-standing board into a triangle shape and glue thin. Remember to keep a damp paper towel glue one of the bottom panels on top of the other. The handy to remove any excess glue. figure of the Vyllage Cryer is assembled the same way. For a final touch, the sign (with the crossed quill THE SHACK pens and bell) is folded into a triangle with both of the The main building will construct as a simple box. printed sides to the outside. It can then be glued over Build the house first and then the chimney. To the window on the building front as shown in the construct the chimney, fold in the side panels and fold photograph below. the tabs on these panels to the back. Fold down the two triangular tabs at the top and glue the top of the chimney in place. Fold down the back panel and glue to the long tabs on the side panels. When dry, glue in place on the side of the house. Place the roof on the building in the using the method described above. The outhouse is a simple box with a flat roof. The fences will construct as stand-ups.
The finished Vyllage Cryer.
Before mass communication, the Vyllage Cryer was the only way to get the news about. Handbills and broadsides were posted outside the shop or on the building sides. These shops also served as scribes for legal or official documents.
OLD JOE’S BOTTLE & BONE SHOPPE
This building will construct exactly like the Vyllage The finished Shack. Cryer, given above. It has several additional windows A typical dwelling of the lower classes that populate the and an additional chimney. To construct the chimney, Vyllage. You'll find several scattered around town. fold into a box, fold down the tabs along the top and glue the top panel in place. The bottom tabs are then THE OLD VYLLAGE TAVERN folded in and the chimney is then glued in place along Glue the two sides of the building together and the center peak of the roof. construct as a box. The roof is in two sections and must be assembled before attaching to the house.The sign is optional and can be placed over the front door.
The finished Bone & Bottle Shoppe.
Old Joe is the owner and operator, buying bones, rags, rubbish The finished Old Vyllage Tavern. and refuse from the common folk. Pando and Larr are his twin A small, but well respected establishment in the Vyllage. For grandsons. They're on hand in case any of Old Joe's customers those who wouldn't be caught dead at the Orc & Cleaver. get "rowdy". THE ODD LITTLE HOUSE inside. Match up the edges of the doorway and the This building was not designed to be anything in cut-out so they are level and none of the glue tab particular, but it does contain many elements that are shows around the edges. When dry, form the building in the full Vyllage-On-The-Cheep™ CD. Start with into a box as normal. When dry, attach the roof the roof on Page One. After cutting out and scoring section by applying glue on the tabs along the tops of the main roof section and the roof skirt, begin by the building walls and press into place. To construct gluing the skirt to the tabs on the bottom of the main the stairs (on Page One), fold in the two sides and fold roof section. Work all the way around until coming to the stair panels to match the angles, gluing all tabs to the last panel. Glue the tab on the main roof section to the inside. Glue one side in place at a time for ease of the inside to close and do the same with the tab on the construction. The extra windows on Page One can be roof skirt. You should end up with a roof looking like placed around the building as desired. the one in the photograph. Cut out the four dormer sections and the four dormer roofs on Page Two. Fold in the sides of the dormer and fold all the tabs to the inside. The dormers can be attached to the main roof so that they are centered and the bottom of the dormer lines up with where the main roof and skirt meet. When dry, attach the roof by applying glue to the tabs along the dormer top and the two tabs at the
The finished building.
What is it? A wizard's house, or an armory. Maybe a garrison for the town guard. With additional signs and windows from the Vyllage CD, it can become whatever you might need for a night of gaming and adventure.
rear of the dormer roof. These tabs will attach directly