Professional Documents
Culture Documents
Unit 3
Contents:
1 of 33 03-Jun-19, 10:12 AM
about:blank
Deployment Kit (Windows ADK) for Windows 10, which is available as a free
download. The ICD provisioning package can include policies and management
instructions for the installation of specific apps and customization of network
connections, and more. In Unit 1, you learned how Microsoft Deployment Toolkit
(MDT) to perform zero-touch installation (ZTI) and User Driven Installation (UDI)
deployment methods. You use ZTI to perform fully-automated deployments. Before
initiating process, you must configure
configuration CustomSettings.ini You
then sequence and scripts, information in
the CustomSettings. the MDT database variables.
These fully automate Windows deployment.
You use partially-automated deployments. Configuration Manager
task sequence runs the LTI wizard to collect deployment information at the time of
deployment. The LTI wizard takes the collected deployment information and sets the
values of the appropriate task sequence variables. The MDT task sequences and
scripts use the task sequence variables that the LTI wizard set, along with other task
sequence variables pulled from the CustomSettings.ini file, the MDT database, to
complete and LTI share a common has
conditional performed only if you select method.
Otherwise, deployment processes for ZTI You can
perform the network or by using attached
to the such as DVDs or USB flash deployment flexibility
allows you to manage deployments regardless of the target device connectivity.
Objectives
After completing this lab, you will be able to:
• Deploy computer.
Lab Setup
2 of 33 03-Jun-19, 10:12 AM
about:blank
Virtual Description
40332A-LON-DC1 Domain controller running the
Adatum.com Active provides
Domain Name System ( Configuration
Protocol (DHCP) services environment.
Start machines:
• 40332A-LON-DC1
• 40332A-LON-CM1
• 40332A-LON-WIN81
To prepare for this lab, perform the following steps to copy the Windows source files:
1. Adatum\Administrator Pa$$w0rd.
3 of 33 03-Jun-19, 10:12 AM
about:blank
5. Open File Explorer and then copy the contents of D:\ drive to E:\Labfiles
\Source\Windows10.
1. sequences
4. Manage apps
5.
6. Task Sequence
7.
4 of 33 03-Jun-19, 10:12 AM
about:blank
6. On the Choose Template page, click Next to accept the default template,
Client Task Sequence, because you are deploying a client operating system.
7. On the General page, in the Task sequence name box, type Windows 10
click Next. The task sequence user-friendly
sequence that displays in the console
Wizard at the time
8. Join a domain.
10. In the Windows User Account dialog box, in the User name box, type
Adatum\Administrator.
14. On the Capture Settings page, you can specify settings for capturing the
5 of 33 03-Jun-19, 10:12 AM
about:blank
image of the target computer after the operating system is deployed. However,
in this exercise, you do not have to capture the image, so click Next to proceed
to the next page of the wizard.
15. On the Boot Image page, you select the boot image that you will use with this
task sequence. We want to create a new boot image to use with MDT
do this, click Create package.
18. On the Options page, you configure the Windows Pre-Installation Environment
(Windows PE) options for the boot image, including the processor architecture
and the scratch space. In this exercise, you will deploy a 64-bit version of
Windows 10, click x64 and then click Next
20. On the Customization page, review the additional options, and then click Next
to accept default values.
21. On the MDT Package page, click Create a new Microsoft Deployment
Toolkit Files package
23.
24. On the MDT Details page, you configure the package name, specify the
package version number, and provide comments for the MDT files package. For
6 of 33 03-Jun-19, 10:12 AM
about:blank
the purpose of this exercise, in the Name box, type MDT Files, and then click
Next.
28.
29. On the Image Details page, in the Name box, type Windows 10 x64, and then
click Next.
30. On the Deployment Method page, click Next to accept the default deployment
method, which is ZTI.
32. On the USMT Package page, you can create a Configuration Manager
package that contains the User State Migration Tool (USMT) programs that the
MDT deployment process uses to capture and restore user state. Click
Browse, select Microsoft Corporation User State Migration Tool for
16384, click OK, and
7 of 33 03-Jun-19, 10:12 AM
about:blank
CM1\Packages$\Settings.
36. On the Settings Details page, in the Name box, type Settings, and then click
Next.
Now you will learn how to manage operating systems for SCCM-based deployments.
In the Configuration Manager console, you can manage operating systems from the
Operating System Installers and Operating System Images nodes. You manage
operating systems in the Operating System Installers and Operating System Images
nodes Manager console. You System
Upgrade manage the complete
installation to upgrade devices in the
package. an operating system
operating to manage in your Depending the
type of 32-bit and 64-bit versions and operating system
editions can be included in one operating system installation medium. For example,
you can have one image that contains both 32-bit and 64-bit versions of Windows 10.
8 of 33 03-Jun-19, 10:12 AM
about:blank
You can use the Add Operating System Installers Wizard in the Configuration
Manager console to add operating system installation images to this node. You can
use the Operating System Images node to manage images that are directly deployed
to target devices. In this node, you will have an operating system images entry for
each operating system image that you want to deploy to your target devices. Each
operating system image in this node is unique to a specific edition and processor
architecture. image in this node can of
Windows use the Add Operating Wizard in
the Configuration console to add images operating
systems, steps:
5. On the General page, you can configure the package name, specify the
package version number, and provide comments about the operating system
installer package. In the Name box, type Windows 10 Enterprise (x64), and
then click Next.
8. In the Properties group on the Home tab, click Properties. The Windows 10
9 of 33 03-Jun-19, 10:12 AM
about:blank
The following steps are to view and review the set properties.
9. In the Windows 10 Enterprise (x64) Properties dialog box, click the Editions
tab.
12. In the Windows 10 Enterprise (x64) Properties dialog box, click Cancel.
16. In the Windows 10 x64 Properties dialog box, click the Images tab. On the
Images tab, you can see the operating system images available and the
properties of each.
17. In the Windows 10 x64 Properties dialog box, click the Data Source tab. On
can see the source creating
10 of 33 03-Jun-19, 10:12 AM
about:blank
Now that you added an operating system, you must add device drivers for SCCM–
based deployments. In System Center 2012 R2 Configuration Manager, you can
dynamically inject device drivers into 32-bit or 64-bit versions of Windows 10 and
Windows PE operating systems. In the Configuration Manager console, you can
manage Drivers node. You device
drivers Import New Driver individual
device driver packages. You packages
to inject the appropriate Windows
operating you import device drivers, to an existing
device driver package or to a new device driver package. To manage device drivers,
perform the following steps:
4. On the Driver Details page, clear the check box next to Hide drivers that are
not digitally signed and then click Next.
7. In the Path box, type \\LON-CM1\Packages$\Drivers, click OK, and then click
11 of 33 03-Jun-19, 10:12 AM
about:blank
Next.
Task
System Center Configuration Manager and MDT provide the ability to initially deploy
software, but they are not designed to perform ongoing software management after
the initial deployment. System Center 2012 R2 Configuration Manager supports two
methods for deploying applications. The first method is the package and program
method that was supported in the previous versions of SCCM. The second method is
the new System Center 2012 From
the Packages Configuration Manager the
software using the package and create
packages using the Create Package the
Configuration
From the Applications node in the Configuration Manager console, you can manage
the software that you deploy by using the new application model. You can create
apps (or if you prefer, software) by using the Create Application Wizard in the
Configuration Manager console. You cannot automatically deploy Windows Store
apps step; however, you the
application exe) feature in UDI. installer
automatically installation of apps the first
Windows will configure an application Click-To-
Run Professional Plus 2013.
12 of 33 03-Jun-19, 10:12 AM
about:blank
2. On the Ribbon, in the Create group on the Home tab, click Create Application.
The Create Application Wizard starts.
9. On the Deployment Types page, click Add. The Create Deployment Type
11. On the General Information page, in the Name box, type Microsoft Office
Professional Plus 2013 - x86 (CTR).
13 of 33 03-Jun-19, 10:12 AM
about:blank
13. On the Content page, you specify the deployment type content that you want to
deploy to the target devices, including the location of the content, the command
to install the application for this deployment type, and the command to uninstall
deployment type. In the type
\\LON-CM1\Source$\OfficeProPlus2013_CTR
15.
16. On the Detection Method page, click Add Clause. The Detection Rule dialog
box appears.
17. In the Detection Rule dialog box, in Setting Type, select Registry.
18. HKEY_LOCAL_MACHINE
Software\Microsoft\Windows\CurrentVersion\Uninstall\O365ProPlusRetail-
20. Select the Use (Default) registry key value for detection check box.
14 of 33 03-Jun-19, 10:12 AM
about:blank
24. Under Logon requirement, select Whether or not a user is logged on.
26. On the Requirements page, you can define the requirements that this app
deployment type might have, such as an operating system version or specific
Because there are no requirements Next.
29. On the Completion page, click Close. The Deployment Types page in the
Create Application Wizard appears.
15 of 33 03-Jun-19, 10:12 AM
about:blank
2. In the details pane, click Microsoft Office Professional Plus 2013 - x86
(CTR).
6. On the Content Destination page, you can select the destination points to
Add, and then click Destination
7. to LON-CM1.Adatum. . Click
8. click Close.
16 of 33 03-Jun-19, 10:12 AM
about:blank
13. In the System Center Configuration Manager console, in the Software Library
workspace, go to Overview/Operating Systems/Operating System Images.
15. In the System Center Configuration Manager console, in the Software Library
workspace, go to Overview/Operating Systems/Operating System Upgrade
18. Repeat steps 2-8 for the Windows PE MDT Custom Boot image.
2. Windows 10 Deployment
3. Sequence group .
17 of 33 03-Jun-19, 10:12 AM
about:blank
5. Select Format and Partition Disk, and then in the Properties pane, select
BDEDrive (Primary).
6. Click the Edit button, the second of three buttons, and then in the Partition
Properties dialog box, select the check box next to Do not assign a drive
letter to this partition. Click OK.
10. Click the New button (the first of three buttons) on the Properties page since we
will be adding a new app to install, and then select Microsoft Office
Professional Plus 2013 - x86 (CTR). Click OK.
o Action: Install
18 of 33 03-Jun-19, 10:12 AM
about:blank
o Purpose: Available
8. Next.
Task
19 of 33 03-Jun-19, 10:12 AM
about:blank
1. Connect to 40332A-LON-BM01.
2. In the Virtual Machine Connection window, click Media, point to DVD Drive, and
then click Insert Disk.
2. On the Welcome to the Task Sequencer Wizard page, click Next. You do not
have to make any changes to the configuration settings on this wizard page.
The deployment process starts, and the progress appears on the computer. This
process will continue unattended until the deployment is complete.
20 of 33 03-Jun-19, 10:12 AM
about:blank
21 of 33 03-Jun-19, 10:12 AM
about:blank
When the deployment is complete, you can verify that Windows is properly
configured. You do this by verifying the computer name and the domain to which
Windows is joined. You can also verify that the apps are properly deployed—for
example Office Professional Plus 2013 that you selected earlier in this exercise.
3. Click System. The System Control Panel System Home app appears.
4. In the System dialog box, under the Computer name, domain, and
workgroup settings section, verify the following:
to a random name. (
scripting, you can specify deployment.)
Adatum.com.
5. dialog box.
6. Click the Start menu, click All apps, and then expand Microsoft Office 2013.
Note: In this lab, it can take several minutes before the Start menu is
ready. If the Start menu does not open immediately, press the Windows
Programs and Features Office 365
on the system.
7.
22 of 33 03-Jun-19, 10:12 AM
about:blank
Scenario
The exercise covers how to deploy Windows 10 to a device running Windows 8.1 by
using Configuration Manager MDT.
This deployment. In this exercise, user
state Windows 8.1 and the task use to
perform then deploy Windows device by
saving user state. Finally, you will state is
successfully restored in Windows 10.
You will use the ZTI MDT deployment method to refresh the device running Windows
8.1 with Windows 10. As a part of the Windows 10 deployment, you will also deploy
the apps that are currently running on
Objectives:
• Configure MDT to perform an offline back up of the user data and settings.
• Configure MDT to restore the saved user data and settings to Windows 10.
23 of 33 03-Jun-19, 10:12 AM
about:blank
o xlsx
o xlsx
24 of 33 03-Jun-19, 10:12 AM
about:blank
o AverageSellPriceAnalysis.xlsx
xlsx
7.
To deploy Windows 10 to the Windows 8.1 device, you will use the same task
sequence “Exercise 1: Deploying Computer”.
Before sequence and deploy Windows Professional
Plus sequence to see how the saved
and then
6. On the Ribbon, in the Task Sequence group on the Home tab, click Edit. The
25 of 33 03-Jun-19, 10:12 AM
about:blank
Note: On the Properties tab of the Capture User State task sequence
that the task sequence uses the USMT package that
earlier. You can also configure other options for capturing
copying by using the file capturing by using
Shadow Services if you want mode, and
task sequence step runs in USMT to
user state.
9. In the Windows 10 Deployment Task Sequence Editor dialog box, click OK.
26 of 33 03-Jun-19, 10:12 AM
about:blank
4. Click OK in the message, and then select the All Windows 7 and 8.1
Workstations collection. Click OK. Click Next.
5. On the Deployment Settings page, configure the following, and then click
Next:
o Action: Install
Now that you have seen how the task sequence saves and restores user state
information, sequence on the refresh the
device Office Professional Plus sequence
saves to the local disk on restores the
user After the user state task
sequence Professional Plus 2013.
27 of 33 03-Jun-19, 10:12 AM
about:blank
2. Open the Control Panel, and then click System and Security.
4. On the Actions tab, click Machine Policy Retrieval & Evaluation Cycle and
OK. Click OK to close
Panel.
7. In Software Center, on the Available Software tab, select the check box next
to Windows 10 Deployment, and then click Install Selected. The Software
Center dialog box opens.
8. In the Software Center dialog box, click Install Operating System. The
and the progress This
unattended until the deployment
Task
28 of 33 03-Jun-19, 10:12 AM
about:blank
Note: There is a bug related to USMT that prevents user state restore, so the
user state data for CORP\Phil will not be restored. As a result of this bug, you
will see an error at the end of the task sequence. You can ignore this error (or
it will eventually disappear automatically) to complete the installation.
1. Adatum\Phil with
4. In the System dialog box, under the Computer name, domain, and
workgroup settings section, verify the following:
Adatum.com.
5. box.
Note: In this task, it can take several minutes before the Start menu is
ready. If the Start menu does not open immediately, press Windows
logo key+X, click Programs and Features, and then check if Office 365
ProPlus is installed on the system.
29 of 33 03-Jun-19, 10:12 AM
about:blank
Scenario
A provisioning package can consist of settings, profiles, and assets. This package is
a file with the .ppkg extension. This package can be delivered to a Windows 10
Enterprise edition device in multiple ways. Some of those ways include sending the
package as an attachment in an email or using a USB flash drive with the package
stored on it. The most sophisticated and secure way is to use a mobile device
management ( such as Microsoft Intune. transform a
system system with little or
Objectives:
• Understand how to use the new Windows Imaging and Configuration Designer
The as follows:
1. Provisioning
The goal of provisioning is to be able to obtain a device from your favorite computer
store enterprise applications wipe and
reload perform provisioning by package
that you Windows ICD tool included for
Windows this provisioning package or
deliver another method such as wipe-
and-reload new system image, you can apply the
provisioning package. A provisioning package is a collection of settings generated by
Windows ICD, applied profiles for different scenarios, some assets, such as
30 of 33 03-Jun-19, 10:12 AM
about:blank
3. provisioning package.
4. In the Name box, type Lab3. Notice the path and name of the default project
folder, and then click Next.
5. In the New project panel, select Common to all Windows editions, and then
9. Provisioning package.
11. Click Next. The Select security details for the provisioning package panel is
31 of 33 03-Jun-19, 10:12 AM
about:blank
displayed.
12. Click Next because we will not be adding a certificate or encrypting our
package.
If your build fails, an error message displays that includes a link to the project folder.
You can scan the logs to determine what caused the error. After you fix the issue,
build the package again. If your build is successful, the name of the provisioning
package, output directory, and project directory will be displayed.
After the package is on the system, there are many methods to deploy it. The
32 of 33 03-Jun-19, 10:12 AM
about:blank
following are some methods to deploy (Note: this is for informational purposes; you
do not perform these tasks in the lab):
• The user can go to Settings > Accounts > Work access > Add or remove a
package for work or school > Add a package, and then select the package to
install.
33 of 33 03-Jun-19, 10:12 AM