Professional Documents
Culture Documents
n ORDERING INFORMATION
JS – 12 M E – K T – (V3)*
[Example] (a) (*) (b) (c) (d) (e) (f) (j)
(a) Series Name JS : JS Series
(b) Nominal Voltage Refer to the COIL DATA CHART
(c) Contact Arrangement Nil : 1 form C (SPDT)
M : 1 form A (SPST-NO)
(d) Contact Material Nil : Gold plate silver cadmium oxide
D : Silver nickel
E : Silver cadmium oxide
F : Gold plate silver nickel
N : Gold plate silver tin oxide
(e) Enclosure K : Plastic sealed type
(j) For low current application Nil: 0.3µ gold overlay (available with Nil, N and F contact)
V3: 3µ gold overlay for lower current applications (available with Nil, N)
and not available for T (5.0mm type)
Note: Actual marking omits the hyphen (-) of (*)
*: V3 is marked at different place from P/N. 1
JS SERIES
n PART NUMBERS
1. Terminal Pitch: 3.2mm
Order P/N Series Voltage Contact Contact material Enclosure Terminal Special
Arrangement Pitch
JS-5M ( )-K(-V3) 5
JS-6M ( )-K(-V3) 6
JS-9M ( )-K(-V3) 9 Nil: Gold plate +
JS-12M ( )-K(-V3) 12 silver cadmium
M: 1 form A oxide
JS-18M ( )-K(-V3) 18
JS-24M ( )-K(-V3) 24 E: Silver cadmium
JS-48M ( )-K(-V3) 48 oxide
Gold plate
JS-60M ( )-K(-V3) 60 K: Plastic Nil: 0.3
JS N: Gold plate silver 3.2 mm
JS-5 ( )-K(-V3) 5 Seal µm
tin oxide
JS-6 ( )-K(-V3) 6 V3: 3 µm
n SPECIFICATIONS
Item Non-V3 type V3 type
JS ( )-E-K, JS ( )-K, JS ( )-K, JS ( )N-K
JS ( )-N-K, JS ( )-F-K,
JS ( )-D-K
Contact Arrangement 1 Form C (SPDT), 1 Form A (SPST-NO)
Material 0.3µ Ag plated 3µ Ag plated
Configuration Single,
Resistance (initial) Max. 100mΩ 1A, 6VDC) Max. 30mΩ (1A 6VDC)
Rating 8A 250 VAC / 24 VDC
Max. carrying current 10A
Max. switching power 2,000 VA / 192 W
Max. switching voltage 400 VAC/ 150 VDC
Min. switching load 100 mA 5 VDC 10 mA 5 VDC
Coil Nominal power (at 20°C) 220 to 290 mW
Operate power (at 20°C) 110 to 140 mW
Operating temperature (at 20°C) -40°C to +85°C (no frost)
Time value Operate Max. 10 ms (at nominal voltage, without bounce)
Release (without diode) Max. 5 ms (at nominal voltage, without bounce)
Life Mechanical Min. 20x106 operations
Electrical AC rated load Min. 100x106 operations (JS-( )N-K min. 10x103 ops.)
DC rated load Min. 100x106 operations (JS-( )N-K min. 10x103 ops.)
Vibration Misoperation 10 to 55 Hz at double amplitude of 1.65 mm
resistance Endurance 10 to 55 Hz at double amplitude of 3.3 mm
Shock Misoperation Min. 100 m/s2 (11±1 ms)
resistance Endurance Min. 1,000 m/s2 (6±1 ms)
Weight Approx. 8 g
n INSULATION
Items
Resistive (at 500 VDC) Min. 1,000 MΩ
Dielectric Strength Open contacts 1,000 VAC (50/60 Hz) 1 min.
Coil and contacts 5,000 VAC (50/60 Hz) 1 min.
Surge strength (coil and contacts) 10,000 V (1.2 x 50 µs standard wave)
Clearance / crepage 8 mm / 8 mm
Isolation (DIN EN 61810-1 VDE 0435)
Voltage 250 V
Pollution 3
Isolation material group III a
Isolation category / Reference voltage (VDE 01106) C / 250V
JS SERIES
n CHARACTERISTIC DATA
80
Coil Temperature Rise Nominal Voltage Multiplying Factor Operating Range
Nominal Voltage Multiplying Factor
(DC24V coil)
JS 2.4 JS type 2.2 0A
(5 to 18VDC coil)
60 1.8 8A
10A 0A 2.0
2.0 8A 10
1.8 A
10
8A 1.8 A
1.6
40
1.6
1.4
1.4
1.2
1.2
20 il)
(hot co
il) 1.0 (hot co
1.0
voltage voltage
perate perate
Must o il) 0.8 Must o ool coil)
0A 0.8 (cool co ltage (c
voltage rate vo
perate pe
0.6 M u st o
0.6 Must o
0
0 0.2 0.4 0.6 0.8 0 20 40 60 80 100 0 20 40 60 80 100
Coil Power (W) Ambient Temperature (ºC) Ambient Temperature (ºC)
Operating Range
Nominal Voltage Multiplying Factor
10 100
24VDC resistive
2.0
10A 2 20
1.8
1.6 1 10
250VAC cosφ=0.7
1.4
0.5 5
1.2 24VDC τ=7ms
oil) DC resistive load
1.0 (hot c
voltage
perate 250VAC cosφ=0.4
Must o 0.2
0.8 ool coil) 2
te vo ltage (c 24VDC τ=15ms
0.6 Mu st opera
0.1
0 20 30 40 60 80 100 10 20 50 100 200 500 0 2 4 6 8 10 12
JS SERIES
n REFERENCE DATA
Life Curves Distribution of Operate & Release Voltage
1000 Timing 100
20 JS-12-K
500 JS type 90 n=100
N 18
300 Operate
JS-12E-KT 80
200 16
Operation (x103)
70 Release
100 250VAC cosφ=1 14
Distribution (%)
60
50
Time (ms)
12
24VDC L/R=1ms
30 50
10
20 250VAC cosφ=0.7
Operate 40
8
10 24VDC L/R=7ms
6 30
5
4 20
3
Release
2 250VAC cosφ=0.4 2 10
24VDC L/R=15ms
1 0 0
0 1 2 3 4 5 6 7 8 9 10 0 0.1 0.2 0.3 0.4 0.5 0.6 0 10 20 30 40 50 60 70
Contact Current (A) Coil Power (W) Nominal Voltage Multiplying Factor (%)
90
JS-12-K
80
n=50
70
Distribution (%)
Make
60
Break
50
40
30
20
10
0
0 2 4 6 8 10 12 14
Contact Resistance (Ω)
JS SERIES
n DIMENSIONS
JS-K type
1 3
(1.19)
50.1
NO
7.620.1
- 0.2
+0.4
3.3
Soldering
COM
0.4+0.2 0.8+0.2 1+0.2 0.25+0.2 5 4
0.1 18.90.1 (2.1)
0.2+0.2 (1.19) 7.62±0.2 3 -ø .5 0.1
2 -ø 1.3
5±0.2 18.9±0.25 (2.1)
Unit: mm
JS SERIES
l All signal and power relays also comply with RoHS. Please refer to individual data
sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that
are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE).
l It has been verified that using lead-free relays in leaded assembly process will not cause any
problems (compatible).
l “LF” is marked on each outer and inner carton. (No marking on individual relays).
l To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office.
l We will ship leaded relays as long as the leaded relay inventory exists.
Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC)
3. Moisture Sensitivity
l Moisture Sensitivity Level standard is not applicable to electromechanical realys.
4. Tin Whisker
l Dipped SnAgCu solder is known as low risk tin whisker. No considerable length whisker was found by our in
house test.
JS SERIES
©2007 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective
owners.
Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our
products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice.
Rev. September 27, 2007