Professional Documents
Culture Documents
A 1 kN-m torque is
applied to this shaft. What is the shear stress at the mid-radius of this shaft?
SOLUSI :
A hollow circular tube with a 2.3-cm I.D. and 2.5-cm O.D. is rigidly supported at its ends. A 2.5 kN-m
torque is applied at the center of this tube. What is the maximum shear stress acting on this tube?
SOLUSI :
SOLUSI :
The hollow (ID = 4 cm, OD = 6 cm) 1-m-long, steel (G = 77 GPA) shaft shown
here is loaded by T1 = T3 = 3 kN-m and T2 = T4 = 10 kN-m. What is the
angular rotation of plane C with respect to plane A of this shaft?
SOLUSI:
SOLUSI :
The gearbox shown here is used to change the speed of rotation. Two
shafts support gears B and E with bearings at A, C, D and F. The pitch
diameter of gear E is 8 cm and that of gear B is 14 cm. A 120 N-m
torque is applied as T1. What is the shear stress in shaft DEF, which is
solid and has a diameter of 4 cm?
SOLUSI :