Professional Documents
Culture Documents
+UNIVERSITY OF BAHRAIN
College of Engineering
MENG 371 Mechanics of Materials
Solution
= = 0.015
= = (0.015) = 79.522 × 10
× .
= =( × )( . × )
= 73.49 × 10 × = 4.21
× .
= =( × )( . × )
= 91.58 × 10 × = 5.25
( ) = 1000 .
= = (1000) = 2500 .
Shaft AB: = 60 × 10
= = =
×
= = ( × )
. ×
= 29.82 × 10 = 29.82
= 2 = 59.6
( ) ℎ : = 60 × 10
= =
×
= = ( × )
. ×
= 21.97 × 10 = 21.97
= 2 = 43.9
(a) Largest Permissible Torque. The largest torque T that can be applied to the shaft
is the torque for which = 120 MPa. Since this value is less than the yield
strength for steel, we can use Eq. (3.9). Solving this equation for T, we have
=( / ) =2
We have, therefore,
4
=2 =
Considering now shaft BE, we recall that the angle of twist of the shaft is equal to the
angle / through which end E rotates with respect to end B. We have
fEyB 5
The angle of rotation of end E is obtained by writing
/ = =
The angle of rotation of end E is obtained by writing
4 5
= + / = + =