Professional Documents
Culture Documents
College of Engineering
Mechanical Engineering Department
ﻗﺴﻢ اﻟ ﻨﺪﺳﺔ اﳌﻴ ﺎﻧﻴﻜﻴﺔ
Course Description ﻭﺻﻒ ﻣﻘﺮﺭ ﺩﺭﺍﺳﻲ
ﺍﻟﻤﻬﻨ ﺔ ﻭﺍﻟﺘﺨﺼﺼ ﺎﺕ ﻭﺍﻟﻮﻅ ﺎﺋﻒ ﺍﻟﻬﻨﺪﺳ ﻴﺔ؛ ﻣﺒ ﺎﺩﺉ ﺍﻟﺘﺤﻠﻴ ﻞ ﺍﻟﻬﻨﺪﺳ ﻲ؛ ﻣﻘﺪﻣ ﺔ ﻓ ﻲ ﺍﻟﺘﺼ ﻤﻴﻢ ﺍﻟﻬﻨﺪﺳ ﻲ
ﺍﻟﻘﻀ ﺎﻳﺎ.ﻭﺗﺸ ﻜﻴﻞ ﺍﻟﻔﺮﻳ ﻖ؛ ﺗﺤﺪﻳ ﺪ ﺍﻟﻤﺴ ﺄﻟﺔ ﺍﻟﻬﻨﺪﺳ ﻴﺔ؛ ﺑﻨﻴ ﺔ ﺍﻟﻨﻈ ﺎﻡ ﺍﻟﻬﻨﺪﺳ ﻲ ﺍﻟﻤﻌﻤﺎﺭﻳ ﺔ ﻭﺍﻟﺘﺤﻠﻴ ﻞ ﺍﻟ ﻮﻅﻴﻔﻲ
ﺍﻟﻤﺘﻌﻠﻘ ﺔ ﺑﺎﻟﺘﺼ ﻤﻴﻢ ﺑﺎﻟﻌﺎﻣ ﻞ ﺍﻟﺒﺸ ﺮﻱ ﻭﺍﻟﺒﻴﺌ ﺔ ﻭﺍﻟﺴ ﻼﻣﺔ ؛ ﺗﻮﻟﻴ ﺪ ﺍﻷﻓﻜﺎﺭﺍﺍﻟﺒﺪﻳﻠ ﺔ؛ ﺗﻘﻴ ﻴﻢ ﺍﻟﺒ ﺪﺍﺋﻞ ﻭﺍﺧﺘﻴ ﺎﺭ
ﺍﻟﻔﻜﺮﺓ؛ ﺍﻟﺪﻓﺎﻉ ﻭﺗﻘﻴﻴﻢ ﺍﻷﺩﺍء ﻟﻠﺘﺼﻤﻴﻢ؛ ﺗﻘﺪﻳﻢ ﺍﻟﺘﻘﺎﺭﻳﺮ؛ ﺃﺧﻼﻗﻴﺎﺕ ﺍﻟﻤﻬﻨﺔ
ا ﺘﻢ
ﻛﻴﻨﻤﺎﺗﻴﻜ ﺎ ﺍﻷﺟﺴ ﺎﻡ ﺍﻟﺠﺎﻣ ﺪﺓ ﻓ ﻲ ﺍﻟﺤﺮﻛ ﺔ، ﻭﺍﻟﺤﺮﻛ ﺔ ﺍﻟﻨﺴ ﺒﻴﺔ، ﺍﻟﺤﺮﻛ ﺔ ﺍﻟﻤﻨﺤﻨﻴ ﺔ:ﻛﻴﻨﻤﺎﺗﻴﻜ ﺎ ﺍﻟﺠﺰﻳﺌ ﺎﺕ
ﺍﻟﺸ ﻐﻞ، ﻗ ﺎﻧﻮﻥ ﻧﻴ ﻮﺗﻦ: ﺣﺮﻛﻴ ﺔ ﺍﻟﺠﺰﻳﺌ ﺎﺕ. ﻭﺍﻟﻤﺤ ﺎﻭﺭ ﺍﻟ ﺪﻭﺍﺭﺓ، ﺍﻟﺴ ﺮﻋﺔ ﺍﻟﻨﺴ ﺒﻴﺔ ﻭﺍﻟﺘﺴ ﺎﺭﻉ:ﺍﻟﻤﺴ ﺘﻮﻳﺔ
ﺍﻟﺤﺮﻛ ﺔ: ﻭﺍﻟﺘﺼ ﺎﺩﻡ؛ ﺣﺮﻛﻴ ﺔ ﺍﻷﺟﺴ ﺎﻡ ﺍﻟﺠﺎﻣ ﺪﺓ ﻓ ﻲ ﺍﻟﺤﺮﻛ ﺔ ﺍﻟﻤﺴ ﺘﻮﻳﺔ، ﻭﺍﻻﻧ ﺪﻓﺎﻉ ﻭﺍﻟ ﺰﺧﻢ،ﻭﺍﻟﻄﺎﻗ ﺔ
. ﻭﺍﻟﺤﺮﻛﺔ ﺍﻟﻌﺎﻣﺔ ﻭﺍﻟﺸﻐﻞ ﻭﺍﻟﻄﺎﻗﺔ ﻭﺍﻻﻧﺪﻓﺎﻉ ﻭﺍﻟﺰﺧﻢ، ﺍﻟﺪﻭﺭﺍﻥ ﺣﻮﻝ ﻣﺤﻮﺭ ﺛﺎﺑﺖ،ﺍﻷﻧﺘﻘﺎﻟﻴﺔ
Kinematics of a particle: curvilinear motion, and relative motion; Kinematics of a rigid body
in plan motion: relative velocity and acceleration, and rotating axes; Kinetics of particles:
Newton’s law, work and energy, impulse and momentum, and impact; Kinetics of a rigid
body in plan motion: translation, fixed axis rotation, general motion, work and energy, and
impulse and momentum.
Engineering Mechanics, Vol. 2, Dynamics, Sevens Edition, SI Version. J.L. Meriam and
L.G. Kraige John Wiley & Sons, Inc.
According to Approved Mechanical
ﻁﺒﻘﺎ ً ﻟﻠﺨﻄﺔ ﺍﻟﻤﻌﺘﻤﺪﺓ ﻟﻘﺴﻢ ﺍﻟﻬﻨﺪﺳﺔ ﺍﻟﻤﻴﻜﺎﻧﻴﻜﻴﺔ ﺍﺑﺘﺪﺍء ﻣﻦ
Engineering Department Plan Starting from
ﻫـ1440/1439 ﺍﻟﻌﺎﻡ ﺍﻟﺠﺎﻣﻌﻲ
Academic Year 2018/2019 G
*The official teaching language at the college of engineering is English.
**(X, Y, L) X = Lectures; Y = Tutorials; L = Lab
ا ﺘﻢ
ﻳﺸ ﺘﻤﻞ ﻣﻘ ﺮﺭ ﻣﺒ ﺎﺩﻱء ﺍﻟﺮﺳ ﻢ ﺍﻟﻬﻨﺪﺳ ﻲ ﻋﻠ ﻰ ﺍﻻﺳ ﻘﺎﻁ ﺍﻟﻤﺘﻌﺎﻣ ﺪ ﻭﺭﺳ ﻢ ﺍﻟﻤﺠﺴ ﻤﺎﺕ ﺇﺿ ﺎﻓﺔ ﺍﻟ ﻰ ﺍﻟﻘﻄﺎﻋ ﺎﺕ
ﺑﺎﻧﻮﺍﻋﻬ ﺎ ﺍﻟﻤﺨﺘﻠﻔ ﺔ ﻭﻛﺘﺎﺑ ﺔ ﺍﻻﺑﻌ ﺎﺩ ﻋﻠ ﻰ ﺍﻟﺮﺳ ﻮﻣﺎﺕ ﺍﻟﻬﻨﺪﺳ ﻴﺔ ﻭﻗ ﺮﺍءﺓ ﻭﺗﻔﺴ ﻴﺮ ﺍﻟﻤﺨﻄﻄ ﺎﺕ ﺍﻟﻬﻨﺪﺳ ﻴﺔ
ﻭﻳ ﺘﻢ ﺗ ﺪﺭﻳﺲ ﺍﻟﻤﻘ ﺮﺭ ﺍﻋﺘﻤ ﺎﺩﺍ ﻋﻠ ﻰ ﺍﻟﺮﺳ ﻢ ﺍﻟﻴ ﺪﻭﻱ ﺍﻟﺤ ﺮ ﻭﺍﺳ ﺘﺨﺪﺍﻡ ﺍﻟﺤﺎﺳ ﺐ ﺍﻻﻟ ﻲ ﻟﻠﺮﺳ ﻮﻣﺎﺕ ﺛﻨﺎﺋﻴ ﺔ
ﻭﺛﻼﺛﻴﺔ ﺍﻻﺑﻌﺎﺩ ﺑﻮﺍﺳﻄﺔ ﺑﺮﻧﺎﻣﺞ ﺍﻻﺗﻮﻛﺎﺩ ﻭﺍﻻﻧﻔﻴﻨﺘﻮﺭ
The course The Fundamentals of Engineering Graphics includes the drawing of Orthographic
and isometric projections. Other topics include scaling, sectioning, dimensioning and blue
print reading. The course is taught using free hand, AutoCAD and AutoDesk Inventor.
ا ﺘﻢ
ﺃﻧﻈﻤ ﺔ ﺍﻟﻨﻤﺬﺟ ﺔ ﺍﻟﻤﺒﻨﻴ ﺔ ﻋﻠ ﻰ،ﺃﺳﺎﺳ ﻴﺎﺕ ﻭﻁ ﺮﻕ ﻧﻤﺬﺟ ﺔ ﺍﻟﺴ ﻄﻮﺡ ﺍﻟﺜﻼﺛﻴ ﺔ ﺍﻷﺑﻌ ﺎﺩ ﻭﺍﻷﺟﺴ ﺎﻡ ﺍﻟﺼ ﻠﺒﺔ
، ﺍﻟﻌﻼﻗ ﺔ ﺑ ﻴﻦ ﻧﻤﺬﺟ ﺔ ﺍﻷﺷ ﻜﺎﻝ ﻭﺍﻟﺘﺼ ﻨﻴﻊ، ﻧﻘ ﻞ ﺍﻟﺒﻴﺎﻧ ﺎﺕ ﺑ ﻴﻦ ﺍﻟ ﻨﻈﻢ،ﺍﻟﻤﻼﻣ ﺢ ﻭﺍﻟﻤﺒﻨﻴ ﺔ ﻋﻠ ﻰ ﺍﻟﻘﻴ ﻮﺩ
ﺍﻟﺘﺤﻠﻴﻞ ﻭﻋﻤﻞ ﺍﻟﻨﻤﺎﺫﺝ
Principles and techniques of 3D surface and solid modeling; Feature-based and constraint-
based modeling systems; Data transfer between systems; Relationship of geometric modeling
to manufacturing; Analysis and rapid prototyping; Development of 2D drawing from the
solid model database: Design annotation including mechanical fastener specification,
geometric dimensioning and tolerancing.
ا ﺘﻢ
ﺍﻟﺘ ﺮﺍﺑﻂ ﺍﻟ ﺬﺭﻱ ؛ ﺗﺮﻛﻴ ﺐ ﻭﺧﺼ ﺎﺋﺺ ﺍﻟﻔﻠ ﺰﺍﺕ ؛ ﺍﻟﺒ ﻮﻟﻴﻤﺮﺍﺕ ﻭﺍﻟﺨﺰﻓﻴ ﺎﺕ ؛،ﻣﻘﺪﻣ ﺔ ﻓ ﻲ ﻫﻨﺪﺳ ﺔ ﺍﻟﻤ ﻮﺍﺩ
ﻣﻨﺤﻨﻴ ﺎﺕ ﺍﻟﺘ ﻮﺍﺯﻥ ﺍﻟﻄ ﻮﺭﻱ ؛ ﺍﻟﺒﻨﻴ ﺔ ﺍﻟﻤﺠﻬﺮﻳ ﺔ ﻟﻠﺴ ﺒﺎﺋﻚ ؛ ﺍﻟﻌﻴ ﻮﺏ ﻭﺍﻟﺸ ﻮﺍﺋﺐ ؛ ﺍﻻﻧﺘﺸ ﺎﺭ ؛ ﺍﻟﺨﺼ ﺎﺋﺺ
ﺍﻟﻤﻴﻜﺎﻧﻴﻜﻴ ﺔ ﻟﻠﻔﻠ ﺰﺍﺕ ﻭﺍﻟﺒ ﻮﻟﻴﻤﺮﺍﺕ ﻭﺍﻟﺨﺰﻓﻴ ﺎﺕ ؛ ﺍﻟﻤﻌﺎﻟﺠ ﺔ ﺍﻟﺤﺮﺍﺭﻳ ﺔ ﻟﻠﺼ ﻠﺐ ﺍﻟﻜﺮﺑ ﻮﻧﻲ ؛ ﺣﺪﻳ ﺪ ﺍﻟﺰﻫ ﺮ
.؛ ﺍﻟﺘﺼﻠﺪ ﺑﺎﻟﺘﺮﺳﻴﺐ
ا ﺘﻢ
ا ﺘﻢ
ﺗﺼﻤﻴﻢ ﺍﻻﺟﺰﺍء ﺍﻟﻤﻴﻜﺎﻧﻴﻜﻴﺔ ؛ ﺗﺼﻤﻴﻢ ﺍﻟﻤﺴﺎﻣﻴﺮ ؛ ﻭﺍﻟﻘﻼﻭﻳﻆ ﺍﻟﻨﺎﻗﻠﺔ ﻟﻠﻘﺪﺭﺓ ؛ ﻋﻨﺎﺻﺮ ﺍﻟﺮﺑﻂ ﻭﺍﻟﻮﺻﻼﺕ ﺍﻟﻤﺘﺮﺍﻭﺣﺔ ؛
ﺗﺼﻤﻴﻢ ﺍﻟﻘﻮﺍﺑﺾ، ؛ ﺗﺼﻤﻴﻢ ﺍﻟﺘﺮﻭﺱ ﺍﻟﻤﺴﺘﻘﻴﻤﺔ ﻭﺍﻟﻤﺎﺋﻠﺔ ؛ ﺗﺼﻤﻴﻢ ﺍﻟﻤﺤﺎﻭﺭ:ﺍﻟﺰﻧﺒﺮﻛﺎﺕ )ﺍﻟﻨﻮﺍﺑﺾ( ﺍﻟﻤﻴﻜﺎﻧﻴﻜﻴﺔ ؛ ﺍﻟﺘﺮﻭﺱ
.( ﺍﻟﻤﺤﺎﻣﻞ ﺍﻟﺪﺣﺮﺍﺟﻴﺔ ؛ ﺍﻟﺘﺰﻳﻴﺖ ﻭﺍﻟﻤﺤﺎﻣﻞ ﺍﻻﻧﺰﻻﻗﻴﺔ )ﺍﻟﺠﻠﺐ،ﻭﺍﻟﻜﻮﺍﺑﺢ ﻭﻣﺨﺘﻠﻒ ﻋﻨﺎﺻﺮ ﻧﻘﻞ ﺍﻟﺤﺮﻛﺔ ﻭﺍﻟﻤﺮﻧﺔ
Design of Mechanical Elements: Screws and Fasteners; Joining Components and Methods;
Springs; Gears: Spur, Helical; Brakes and Clutches; Flexible elements; Rolling Elements
Bearings, Journal Bearings.
ا ﺘﻢ
*
Course Code and Number: ME312 ﻫﻤﻚ312 :ﺍﻟﺮﻗﻢ ﻭﺍﻟﺮﻣﺰ
This course will provide the student with an introduction, classification, concepts and various
technologies of manufacturing processes including bulk and sheet metal forming, metal
casting in expendable and permanent molds and metal joining processes including fusion and
solid state welding which are widely utilized in industry. Calculation of process particulars
as well as the interrelationships between the material properties and the manufacturing
process is also covered.
ا ﺘﻢ
ﻫ ﺬﺍ ﺍﻟﻤﻘ ﺮﺭ ﻳﻤﺜ ﻞ ﻣﻘ ﺮﺭ ﻣﺒ ﺪﺋﻰ ﻓ ﻰ ﻗﻄ ﻊ ﻭﺗﺸ ﻐﻴﻞ ﺍﻟﻤﻌ ﺎﺩﻥ ﺍﻟﻤﻮﺟ ﻮﺩﺓ ﻓ ﻰ ﺍﻟﺼ ﻨﺎﻋﺔ ﻭﻋﻼﻗ ﻪ ﻣﻮﺍﺻ ﻔﺎﺕ
ﺍﻟﻤﻮﺍﺩ ﺑﺎﺩﻭﺍﺕ ﺍﻟﻘﻄﻊ ﺍﻟﻤﺴﺘﺨﺪﻣﺔ ﻭﻛﺬﻟﻚ ﺍﻟﻤﺎﻛﻴﻨﺎﺕ ﺍﻟﻤﺴﺘﺨﺪﻣﺔ ﻓﻰ ﺍﻟﺘﺼﻨﻴﻊ
This is an introductory course to metal cutting processes that will cover all the basic concepts,
calculations and applications of different metal cutting processes used in the present industry.
An introduction to material properties related to metal cutting will be also covered. The
course emphasizes machines /cutting tools/ cutting conditions selection and sequencing for
.manufacture. Thereby contributing to the achievement of student outcomes a, b, c and l
ا ﺘﻢ
**
Credit Hours 2(1, 1, 2) (2،1،1) 2 :ﺍﻟﺴﺎﻋﺎﺕ ﺍﻟﻤﻌﺘﻤﺪﺓ
Course Pre-requisite: - STAT 101
- ﺍﺣﺺ ﻣﻘﺪﻣﺔ ﻓﻲ ﺍﻹﺣﺼﺎء101 -:ﺍﻟﻤﺘﻄﻠﺒﺎﺕ ﺍﻟﺴﺎﺑﻘﺔ
Introduction to Statistics , ME 384 Fluid
ﻫﻤﻚ ﻣﻴﻜﺎﻧﻴﻜﺎ ﺍﻟﻤﻮﺍﺋﻊ384
Mechanics
Course Co-requisite: - - :ﺍﻟﻤﺘﻄﻠﺒﺎﺕ ﺍﻟﻤﺮﺍﻓﻘﺔ
ﺗﺤﻠﻴ ﻞ ﺍﻻﺷ ﺎﺭﺍﺕ ﺍﻟﺮﻗﻤﻴ ﺔ، ﻣﻮﺍﺻ ﻔﺎﺕ ﺃﺟﻬ ﺰﺓ ﺍﻟﻘﻴ ﺎﺱ ﻭﺍﻟﻤﻌ ﺪﺍﺕ، ﻣﻔ ﺎﻫﻴﻢ ﺍﻟﻘﻴ ﺎﺱ ؛ ﺗﺤﻠﻴ ﻞ ﻋ ﺪﻡ ﺍﻟﺘﺄﻛ ﺪ
ﺗﻄﺒﻴﻘ ﺎﺕ ﻋﻠ ﻰ، ﺃﺧ ﺬ ﺍﻟﺒﻴﺎﻧ ﺎﺕ ﻭﺗﺤﻠﻴﻠﻬ ﺎ، " ﻭﻳﺸ ﺘﻤﻞ ﺫﻟ ﻚ ﻋﻠ ﻰ ﺗﻤ ﺎﺭﻳﻦ ﻓ ﻲ" ﻻﺏ ﻓﻴ ﻮ. ﻭﺍﻷﻧ ﺎﻟﻮﺝ
ﺍﻟﻘﻴﺎﺳﺎﺕ
ا ﺘﻢ
The design, execution, and evaluation of physical experiments in the area of fluid mechanics,
thermodynamics and heat transfer. Emphasis on application of classroom theory to
experimental engineering and on interpretation and presentation of results.
Introduction to fluid mechanics, 8th edition Fox, McDonald, and Pritchard, Wiley, 2012
ا ﺘﻢ
The design, execution, and evaluation of physical experiments in the area of solid mechanics,
dynamics of physical systems and control. Digital simulation of linear systems using a
software package (MATLAB). Emphasis on application of classroom theory to experimental
engineering and on interpretation and presentation of results.
ا ﺘﻢ
ﺍﻟﺦ( ﺗﺤﺖ ﺗﺄﺛﻴﺮ ﺍﻷﺣﻤﺎﻝ ﺍﻟﻤﺨﺘﻠﻔﺔ ؛، ﺍﻟﻌﻮﺍﺭﺽ، ﺍﻟﻤﺤﺎﻭﺭ، ﺩﺭﺍﺳﺔ ﺍﻟﺴﻠﻮﻙ ﺍﻟﻤﻴﻜﺎﻧﻴﻜﻲ ﻟﻸﺟﺴﺎﻡ ﺍﻟﺼﻠﺒﺔ )ﺍﻟﻘﻀﺒﺎﻥ
ﺍﻹﺟﻬﺎﺩﺍﺕ ﻭﺍﻹﻧﻔﻌﺎﻻﺕ ﺍﻟﻤﻴﻜﺎﻧﻴﻜﻴﺔ ﻭﺍﻟﺤﺮﺍﺭﻳﺔ ؛ ﺍﻟﻌﻼﻗﺔ ﺑﻴﻦ ﺍﻻﻧﻔﻌﺎﻝ ﻭﺍﻹﺟﻬﺎﺩ ؛ ﺍﻟﺘﺸﻮﻩ ﺍﻟﻤﺤﻮﺭﻱ )ﺍﻷﺣﺎﺩﻱ( ؛ ﻗﻮﻯ ﺍﻟﻘﺺ
ﺣﺎﻭﻳﺎﺕ،(ﻭﻋﺰﻭﻡ ﺍﻻﻧﺤﻨﺎء ﻓﻲ ﺍﻟﻌﻮﺍﺭﺽ ؛ ﺍﻹﺟﻬﺎﺩﺍﺕ ﻓﻲ ﺍﻟﻌﻮﺍﺭﺽ ؛ ﺍﻹﻟﺘﻮﺍء ﻓﻲ ﺍﻟﻤﺤﺎﻭﺭ ؛ ﺍﻷﺣﻤﺎﻝ ﺍﻟﻤﺮﻛﺒﺔ )ﺃﻭ ﺍﻟﻤﺆﻟﻔﺔ
.ﺍﻟﻀﻐﻂ ﺫﺍﺕ ﺍﻟﺠﺪﺭﺍﻥ ﺍﻟﺮﻗﻴﻘﺔ ؛ ﺗﺤﻠﻴﻞ ﺍﻹﺟﻬﺎﺩﺍﺕ ﻭﺍﻹﻧﻔﻌﺎﻻﺕ ﺍﻟﻤﺴﺘﻮﻳﺔ ﻭﺗﺤﻮﻳﻠﻬﺎ
Study of the mechanical behavior of solid bodies (Rods, shafts, beams, etc.) under various
types of loading. Mechanical and thermal stresses and strains; Stress-strain relations; Axial
deformation; Shear and bending moments in beams; Stresses in beams; Torsion of shafts, thin
walled vessels; Combined loadings; Analysis of plane stress and plane strain; Stress and strain
transformation.
ا ﺘﻢ
ا ﺘﻢ
ا ﺘﻢ
أﺣﻤﺪ ﺑﻦ ﻣﺤﻤﺪ اﻟﻨﻌﻴﻢ.د
King Saud University
College of Engineering
Mechanical Engineering Department
ﻗﺴﻢ اﻟ ﻨﺪﺳﺔ اﳌﻴ ﺎﻧﻴﻜﻴﺔ
Course Description ﻭﺻﻒ ﻣﻘﺮﺭ ﺩﺭﺍﺳﻲ
1) Nise N., Control Systems Engineering, Wiley and Sons, N.Y, 6th edition
ا ﺘﻢ
أﺣﻤﺪ ﺑﻦ ﻣﺤﻤﺪ اﻟﻨﻌﻴﻢ.د
King Saud University
College of Engineering
Mechanical Engineering Department
ﻗﺴﻢ اﻟ ﻨﺪﺳﺔ اﳌﻴ ﺎﻧﻴﻜﻴﺔ
Course Description ﻭﺻﻒ ﻣﻘﺮﺭ ﺩﺭﺍﺳﻲ
ﺍﻧﺘﻘﺎﻝ ﺍﻟﻄﺎﻗﺔ ؛ ﺍﻟﻘﺎﻧﻮﻥ ﺍﻷﻭﻝ ﻟﻠﺪﻳﻨﺎﻣﻴﻜﺎ ﺍﻟﺤﺮﺍﺭﻳﺔ ؛ ﺍﻟﻘﺎﻧﻮﻥ ﺍﻟﺜﺎﻧﻲ ﻟﻠﺪﻳﻨﺎﻣﻴﻜﺎ ﺍﻟﺤﺮﺍﺭﻳﺔ،ﻣﻔﺎﻫﻴﻢ ﻭﺃﺳﺎﺳﻴﺎﺕ ﺍﻟﺪﻳﻨﺎﻣﻴﻜﺎ ﺍﻟﺤﺮﺍﺭﻳﺔ
.؛ ﺍﻹﻧﺘﺮﻭﺑﻲ ؛ ﺩﻭﺭﺓ ﻛﺎﺭﻧﻮ ؛ ﺩﻭﺭﺓ ﻛﺎﺭﻧﻮ ﺍﻟﻤﻌﻜﻮﺳﺔ ؛ ﺩﻭﺭﺓ ﺭﺍﻧﻜﻦ ؛ ﺩﻭﺭﺓ ﺍﻟﺘﺒﺮﻳﺪ ﺑﻀﻐﻂ ﺍﻟﺒﺨﺎﺭ
ا ﺘﻢ
ﻭﻫﻮ ﻳﻮﻓﺮ ﺍﺳﺘﻤﺮﺍﺭﻳﺔ ﻟﻠﻤﻮﺍﺿﻴﻊ ﺍﻟﺘﻲ ﺗﻢ ﺗﻐﻄﻴﻬﺎ ﻓﻰ.( ﻫﻮ ﻣﻘﺮﺭ ﺃﺳﺎﺳﻲ ﻓﻲ ﺍﻟﻬﻨﺪﺳﺔ ﺍﻟﻤﻴﻜﺎﻧﻴﻜﻴﺔ2) ﺍﻟﺪﻳﻨﺎﻣﻴﻜﺎ ﺍﻟﺤﺮﺍﺭﻳﺔ
ﻳﺒﺪﺃ ﺍﻟﻤﻘﺮﺭ ﺑﺘﻌﺮﻳﻒ ﺍﻹﺗﺎﺣﻴﺔ ﻭ ﺍﻻﺳﺘﻤﺮﺍﺭ ﻓﻰ ﺍﻟﺘﻄﺒﻴﻘﺎﺕ ﻟﻠﻤﺒﺎﺩﻯء ﺍﻻﺳﺎﺳﻴﺔ ﻣﺜﻞ ﺍﻟﻤﺤﺮﻛﺎﺕ.(1) ﺍﻟﺪﻳﻨﺎﻣﻴﻜﺎ ﺍﻟﺤﺮﺍﺭﻳﺔ
ﺛﻢ ﻳﺘﻢ ﺗﻐﻄﻴﺔ ﻋﻼﻗﺎﺕ ﺍﻟﺨﻮﺍﺹ ﻭﻁﺮﻕ ﺍﻟﺘﻌﺎﻣﻞ ﻣﻊ ﺍﻟﻤﺨﺎﻟﻴﻂ. ﻭ ﺩﻭﺭﺍﺕ ﺍﻟﺘﺒﺮﻳﺪ،ﺍﻟﺤﺮﺍﺭﻳﺔ ﻭ ﻣﺤﻄﺎﺕ ﺗﻮﻟﻴﺪ ﺍﻟﻜﻬﺮﺑﺎء
ﻭﻳﺨﺘﺘﻢ ﺍﻟﻤﻘﺮﺭ ﺑﻤﻘﺪﻣﺔ ﻋﻦ ﺍﻟﻮﻗﻮﺩ ﺍﻟﻬﻴﺪﺭﻭﻛﺮﺑﻮﻧﻰ ﻭﺑﺘﻄﺒﻴﻖ ﺍﻟﻘﺎﻧﻮﻥ. ﺍﻟﻐﺎﺯ ﻣﻊ ﺗﻄﺒﻴﻘﺎﺕ ﺗﻜﻴﻴﻒ ﺍﻟﻬﻮﺍء-ﻭﻣﺨﺎﻟﻴﻂ ﺍﻟﺒﺨﺎﺭ
.ﺍﻷﻭﻝ ﻋﻠﻰ ﻧﻈﻢ ﺍﻻﺣﺘﺮﺍﻕ
Thermodynamics (II) is a fundamental course in Mechanical Engineering. It provides a
continuation of topics covered in Thermodynamics (I). The course starts with the definition
of exergy and continues with applied concepts, including engine, power plant, and
refrigeration cycles. Property relations and methods for dealing with mixtures and gas-vapor
mixtures with applications to air conditioning are then covered. The course concludes with
the introduction of hydrocarbon fuels and the application of the first law to reacting systems.
ا ﺘﻢ
أﺣﻤﺪ ﺑﻦ ﻣﺤﻤﺪ اﻟﻨﻌﻴﻢ.د
King Saud University
College of Engineering
Mechanical Engineering Department
ﻗﺴﻢ اﻟ ﻨﺪﺳﺔ اﳌﻴ ﺎﻧﻴﻜﻴﺔ
Course Description ﻭﺻﻒ ﻣﻘﺮﺭ ﺩﺭﺍﺳﻲ
Steady and unsteady one and two-dimensional heat conduction; Numerical analysis of steady
and unsteady conduction; Free and forced convection for external and internal flows; Heat
exchangers; Properties and processes of radiation, radiation exchange between surfaces.
1) Incropera, DeWitt, Bergman, and Lavine, Principles of Heat and Mass Transfer,
Wiley, 7th Ed., 2013
According to Approved Mechanical
ﻁﺒﻘﺎ ً ﻟﻠﺨﻄﺔ ﺍﻟﻤﻌﺘﻤﺪﺓ ﻟﻘﺴﻢ ﺍﻟﻬﻨﺪﺳﺔ ﺍﻟﻤﻴﻜﺎﻧﻴﻜﻴﺔ ﺍﺑﺘﺪﺍء ﻣﻦ
Engineering Department Plan Starting from
ﻫـ1440/1439 ﺍﻟﻌﺎﻡ ﺍﻟﺠﺎﻣﻌﻲ
Academic Year 2018/2019 G
*The official teaching language at the college of engineering is English.
**(X, Y, L) X = Lectures; Y = Tutorials; L = Lab
ا ﺘﻢ
، ﺍﺧﺘﻴﺎﺭ ﻭﺃﺩﺍء ﺍﻟﻤﻀﺨﺎﺕ. ﺍﻻﻧﺎﺑﻴﺐ ﺍﻟﻤﺘﻮﺍﺯﻳﺔ. ﺍﻟﺘﺪﻓﻖ ﺧﻼﻝ ﺷﺒﻜﺎﺕ ﺍﻻﻧﺎﺑﻴﺐ.ﺗﺼﻤﻴﻢ ﻣﻨﻈﻮﻣﺎﺕ ﺍﻷﻧﺎﺑﻴﺐ ﻭﻋﻤﻠﻴﺔ ﺍﻟﺘﺤﺴﻴﻦ
. ﺍﺧﺘﻴﺎﺭ ﻣﻜﻮﻧﺎﺕ ﺃﻧﻈﻤﺔ ﺍﻟﻤﻮﺍﺋﻊ ﺍﻟﺤﺮﺍﺭﻳﺔ. ﺍﻷﻧﻮﺍﻉ ﺍﻟﻤﺨﺘﻠﻔﺔ ﻟﻠﻤﺒﺎﺩﻻﺕ ﺍﻟﺤﺮﺍﺭﻳﺔ،ﺍﻟﻀﻮﺍﻏﻂ ﻭﺍﻟﻤﺮﺍﻭﺡ
Design of piping systems and the optimization process; Flow in pipe networks; Pipes in
parallel; Performance and selection of pumps; Fans and fan performance; heat exchangers of
different kinds such as double pipe, shell and tubes and cross flow; Selection of thermal-fluid
system components.
Janna, W.S., Design of Fluid Thermal Systems, 3rd Edition, Cengage Learning, 2011
ا ﺘﻢ
Dimensions and units; Fundamental concepts in fluids; Fluid statics; Control volume;
Conservation of mass and momentum equations; Differential form of equations; Stream
function and velocity potential; Euler's equations; Bernoulli's equation; Dimensional analysis
and model studies; Internal incompressible viscous flow; External viscous flow; Introduction
to compressible flow.
ا ﺘﻢ
Daryl L. Logan, A First Course in Finite Elements Method, CENGAGE Learning , 5th
Edition 2012
According to Approved Mechanical
ﻁﺒﻘﺎ ً ﻟﻠﺨﻄﺔ ﺍﻟﻤﻌﺘﻤﺪﺓ ﻟﻘﺴﻢ ﺍﻟﻬﻨﺪﺳﺔ ﺍﻟﻤﻴﻜﺎﻧﻴﻜﻴﺔ ﺍﺑﺘﺪﺍء ﻣﻦ
Engineering Department Plan Starting from
ﻫـ1440/1439 ﺍﻟﻌﺎﻡ ﺍﻟﺠﺎﻣﻌﻲ
Academic Year 2018/2019 G
*The official teaching language at the college of engineering is English.
**(X, Y, L) X = Lectures; Y = Tutorials; L = Lab
ا ﺘﻢ
Course Level: 9 or 10 “Elective Course” " "ﻣﻘﺮﺭ ﺇﺧﺘﻴﺎﺭﻯ10 ﺍﻭ9 :ﻣﺴﺘﻮﻯ ﺍﻟﻤﻘﺮﺭ
ﻣﻘﺪﻣ ﺔ ﻋ ﻦ ﺍﻟﺘﺼ ﻤﻴﻢ ﻭﺍﻟﺘﺤﻠﻴ ﻞ ﻟﻠﻤﺮﻛﺒ ﺎﺕ ﻭﺍﻟﻤﻨﻈﻮﻣ ﺎﺕ ﺍﻟﻤﻴﻜﺎﻧﻴﻜﻴ ﺔ ﺑﻤﺴ ﺎﻋﺪﺓ ﺍﻟﺤﺎﺳ ﺐ ؛ ﺍﻟﺘﻤﺜﻴ ﻞ ﺍﻟﺜﺎﺑ ﺖ
ﻭﺍﻟﻤﺘﺤ ﺮﻙ ﻭﺍﻟﺴ ﻠﻮﻙ ﺍﻟ ﺪﻳﻨﺎﻣﻴﻜﻲ ﻭﺍﻟﺘﺮﻛﻴﺒ ﺎﺕ ﺍﻟﻤﺜﻠ ﻰ ؛ ﺗﻮﻟﻴ ﺪ ﺍﻟﺤﺎﺳ ﺐ ﻟﻨﻤ ﺎﺫﺝ ﺍﻷﺷ ﻜﺎﻝ ﺍﻟﻬﻨﺪﺳ ﻴﺔ ؛
ﻣﺨﻄﻄ ﺎﺕ ﺍﻟﺘﺒ ﺎﺩﻝ ؛ ﻭﺍﺳ ﺘﺨﺪﺍﻡ ﺍﻟﺘﺤﻠﻴ ﻞ ﻭﺍﻟﻨﻤﺬﺟ ﺔ ﺑﻄﺮﻳﻘ ﺔ ﺍﻟﻌﻨﺎﺻ ﺮ،ﺣﺴ ﺎﺑﺎﺕ ﻋﻮﺍﻣ ﻞ ﺍﻟﺘﺼ ﻤﻴﻢ
. ﻣﺸﺮﻭﻉ ﻓﺼﻠﻲ، ﺍﻟﻤﺤﺪﻭﺩﺓ ؛ ﺗﺼﻤﻴﻢ ﻣﻜﻮﻧﺎﺕ ﺍﻟﻬﻴﺎﻛﻞ ﺑﺎﺳﺘﺨﺪﺍﻡ ﺍﻟﺒﺮﺍﻣﺞ ﺍﻟﻘﻴﺎﺳﻴﺔ ﺍﻟﺼﻨﺎﻋﻴﺔ
Introduction to the use of the digital computer as a tool in engineering design and
analysis of mechanical components and systems. Simulation of static, kinematic and dynamic
behavior. Optimal synthesis. Computer generation of geometric models, calculation of design
parameters, trade-off diagrams, and finite-element modeling and analysis. Structural
component design using industry-standard software. Term projects.
ا ﺘﻢ
Course Level: 9 or 10 “Elective Course” " "ﻣﻘﺮﺭ ﺇﺧﺘﻴﺎﺭﻯ10 ﺍﻭ9 :ﻣﺴﺘﻮﻯ ﺍﻟﻤﻘﺮﺭ
ﻣﺮﺣﻠ ﺔ ﺍﻟﺘﺼ ﻤﻴﻢ، ﺩﺭﺍﺳ ﺔ ﺍﻟﺠ ﺪﻭﻯ، ﺍﻟﺒﻨﻴ ﺔ ﺍﻷﺳﺎﺳ ﻴﺔ ﻟﻠﺘﺼ ﻤﻴﻢ، ﺗﻨ ﺎﻭﻝ ﻣﻨﻬﺠ ﻲ ﻟﻤﺴ ﺎﺋﻞ ﺍﻟﺘﺼ ﻤﻴﻢ
، ﺍﺳ ﺘﺨﺪﺍﻡ ﺗﻘﻨﻴ ﺎﺕ ﺍﻟﺤﺎﺳ ﺐ، ﺗﻘ ﻴﻢ ﻣﻔ ﺎﻫﻴﻢ ﺍﻟﺘﺼ ﻤﻴﻢ، ﺗﻮﻟﻴ ﺪ ﺍﻷﻓﻜ ﺎﺭ، ﻣﺮﺣﻠ ﺔ ﺍﻟﺘﺼ ﻤﻴﻢ ﺍﻟﻤﻔﺼ ﻠﺔ،ﺍﻷﻭﻟﻴ ﺔ
ﺍﻟﻬﻨﺪﺳ ﺔ ﺍﻟﻌﻜﺴ ﻴﺔ، ﺍﻟﺮﺳ ﻮﻡ ﺍﻟﺘﻔﺼ ﻴﻠﻴﺔ ﻭﺍﻟﺘﺠﻤﻴﻌﻴ ﺔ، ﺍﻟﺘﺼ ﻤﻴﻢ ﻟﺴ ﻬﻮﻟﺔ ﺍﻟﺼ ﻴﺎﻧﺔ،ﺍﻟﺘﺼ ﻤﻴﻢ ﺑﻬ ﺪﻑ ﺍﻹﻧﺘ ﺎﺝ
. ؛ ﻣﺸﺮﻭﻉ ﺗﺼﻤﻴﻢ ﻓﺼﻠﻲ
Systematic approach to design problems, morphology of design, feasibility study, preliminary
design phase, detailed design phase, generation of ideas, evaluation of design concepts, use of
computer techniques, designing for production, designing for ease of maintenance, assembly
and detail drawings, reverse engineering. Term design projects.
1) D.G. Ullman, The Mechanical Design Process, McGraw-Hill, fifth edition 2010
ا ﺘﻢ
Course Level: 9or10 “Elective Course” ""ﻣﻘﺮﺭ ﺇﺧﺘﻴﺎﺭﻯ10 ﺍﻭ9 :ﻣﺴﺘﻮﻯ ﺍﻟﻤﻘﺮﺭ
ﺍﻟﻄﺮﻕ، ﺍﻟﺒﺮﻣﺠﺔ ﺍﻟﺨﻄﻴﺔ، ﻣﻔﺎﻫﻴﻢ ﺍﻟﺘﺼﻤﻴﻢ ﺍﻷﻣﺜﻞ. ﺻﻴﺎﻏﺔ ﻣﺴﺎﺋﻞ ﺍﻟﺘﺼﻤﻴﻢ ﺍﻷﻣﺜﻞ ﻓﻲ ﻣﻨﻈﻮﻣﺎﺕ ﺍﻟﻬﻨﺪﺳﺔ ﺍﻟﻤﻴﻜﺎﻧﻴﻜﻴﺔ
. " ﻁﺮﻳﻘﺔ " ﻻﺟﺮﺍﻧﺞ، ﺍﻟﻌﺪﺩﻳﺔ ﻟﻠﺘﺼﺎﻣﻴﻢ ﺍﻟﻤﻘﻴﺪﺓ ﻭﻏﻴﺮ ﺍﻟﻤﻘﻴﺪﺓ
Optimum design problem formulation to Mechanical Engineering systems. Optimum design
concept. Linear programming. Numerical methods for unconstrained and constrained
optimum design, Lagrange method.
ا ﺘﻢ
*
Course Code and Number: * ME408 ﻫﻤﻚ408 :ﺍﻟﺮﻗﻢ ﻭﺍﻟﺮﻣﺰ
Course Title: Friction, Wear and
ﺍﻟﺘﺂﻛﻞ ﻭﺍﻟﺘﺰﻳﻴﺖ،ﺍﺳﻢ ﺍﻟﻤﻘﺮﺭ ﺍﻻﺣﺘﻜﺎﻙ
Lubrication
Credit Hours 3(3, 0, 0) ** **
(0،0،3) 3 :ﺍﻟﺴﺎﻋﺎﺕ ﺍﻟﻤﻌﺘﻤﺪﺓ
Course Pre-requisite: ME 305 Mechanical ﻫﻤﻚ ﺍﻟﺘﺼﻤﻴﻢ ﺍﻟﻬﻨﺪﺳﻲ305 :ﺍﻟﻤﺘﻄﻠﺒﺎﺕ ﺍﻟﺴﺎﺑﻘﺔ
Engineering Design (2) (2) ﺍﻟﻤﻴﻜﺎﻧﻴﻜﻲ
Course Co-requisite: - - :ﺍﻟﻤﺘﻄﻠﺒﺎﺕ ﺍﻟﻤﺮﺍﻓﻘﺔ
Course Level: 9/10 “ Elective course” " – "ﺍﺧﺘﻴﺎﺭﻱ10 ﺍﻭ9 :ﻣﺴﺘﻮﻯ ﺍﻟﻤﻘﺮﺭ
ﻭﺍﻟﺨ ﻮﺍﺹ ﻟﻬ ﺬﻩ ﺍﻟﻤ ﻮﺍﺩ ﻭﺍﻟﺘ ﻲ ﺗ ﺆﺛﺮ ﻋﻠ ﻰ، ﺩﺭﺍﺳ ﺔ ﻣﺒ ﺎﺩﺉ ﺍﻻﺣﺘﻜ ﺎﻙ ﻭﺳ ﻠﻮﻙ ﺍﻟﺘﺂﻛ ﻞ )ﺍﻟﺒﻠ ﻰ( ﻟﻠﻤ ﻮﺍﺩ
. ﺗﻄﺒﻴﻘﺎﺕ ﻋﻠﻰ ﺗﺼﻤﻴﻢ ﺍﻟﺴﻄﻮﺡ ﻟﻤﻘﺎﻭﻣﺔ ﺍﻟﺘﺂﻛﻞ ﻭﺍﻟﺒﻠﻰ، ﻣﺒﺎﺩﺉ ﺍﻟﺘﺰﻳﻴﺖ،ﻣﺜﻞ ﻫﺬﺍ ﺍﻟﺴﻠﻮﻙ
Study of principles of friction and wear behavior of materials and of those material properties
that affect such behavior. Principles of lubrication. Applications to design of surfaces for
wear resistance.
ﺍﻟﺨﺘﻢ
Course Level: 9 or 10 “Elective Course” " "ﻣﻘﺮﺭ ﺇﺧﺘﻴﺎﺭﻯ10 ﺍﻭ9 :ﻣﺴﺘﻮﻯ ﺍﻟﻤﻘﺮﺭ
ﺃﺳ ﺲ ﺍﻷﺩﺍء، ﺃﺳ ﺲ ﺍﻷﺩﺍء ؛ ﻣﺨﻄﻄ ﺎﺕ ﺍﺧﺘﻴ ﺎﺭ ﺍﻟﻤ ﻮﺍﺩ، ﺧ ﻮﺍﺹ ﺍﻟﻤ ﻮﺍﺩ،ﺗﺼ ﻨﻴﻒ ﺍﻟﻤ ﻮﺍﺩ ﺍﻟﻬﻨﺪﺳ ﻴﺔ
. ﺩﺭﺍﺳﺎﺕ ﺣﺎﻟﺔ،ﺍﻟﺘﻲ ﺗﺸﺘﻤﻞ ﻋﻠﻰ ﻋﻮﺍﻣﻞ ﻟﻸﺷﻜﺎﻝ ﺍﻟﻬﻨﺪﺳﻴﺔ
ﺍﻟﺨﺘﻢ
Course Level: 9 or 10 “Elective Course” " "ﻣﻘﺮﺭ ﺇﺧﺘﻴﺎﺭﻯ10 ﺍﻭ9 :ﻣﺴﺘﻮﻯ ﺍﻟﻤﻘﺮﺭ
ﺳ ﻴﻐﻄﻰ ﻫ ﺬﺍ ﺍﻟﻤﻘ ﺮﺭ ﻣﻘﺪﻣ ﺔ ﻋ ﻦ ﻋﻤﻠﻴ ﺎﺕ ﻣﺘﻨﻮﻋ ﺔ ﻭﻋﺪﻳ ﺪﺓ ﻭ ﺍﻷﻛﺜ ﺮ ﺍﻧﺘﺸ ﺎﺭﺍ ﻓ ﻰ ﺍﻟﺘﺼ ﻨﻴﻊ ﺍﻟﻤﺘﻘ ﺪﻡ ﻭ
ﻛ ﺬﻟﻚ ﺍﻟﻤﻔ ﺎﻫﻴﻢ ﻭ ﺍﻟﺘﻘﻨﻴ ﺎﺕ ﻣ ﻊ ﺍﻷﻫﺘﻤ ﺎﻡ ﺑﺘﺼ ﻤﻴﻢ ﺍﻟﻤﻨ ﺘﺞ ﻭ ﻛ ﺬﻟﻚ ﺍﻟﻌﻼﻗ ﺔ ﺍﻟﻮﺛﻴﻘ ﺔ ﺑ ﻴﻦ ﺧﺼ ﺎﺋﺺ ﺍﻟﻤ ﺎﺩﺓ
.ﻭ ﻋﻤﻠﻴﺔ ﺍﻟﺘﺼﻨﻴﻊ
This course will provide the student with an introduction, concepts and technologies of
various advanced manufacturing processes, which are widely utilized in industry with
emphasis on the product design and interrelationships between the material properties and
the manufacturing process.
Materials and Processes In Manufacturing, De Garmo, Black, Kohser, Tenth Edition, Wiley.
ﺍﻟﺨﺘﻢ
Course Level: 9 or 10 “Elective Course” " "ﻣﻘﺮﺭ ﺇﺧﺘﻴﺎﺭﻯ10 ﺍﻭ9 :ﻣﺴﺘﻮﻯ ﺍﻟﻤﻘﺮﺭ
، ﺍﻷﻫ ﺪﺍﻑ ﻣ ﻦ ﺗﺤﻠﻴ ﻞ ﺗﺸ ﻜﻴﻞ ﺍﻟﻤﻌ ﺎﺩﻥ، ﺗﺼ ﻨﻴﻒ ﺃﺳ ﺎﻟﻴﺐ ﺍﻟﺘﺸ ﻜﻴﻞ،ﺃﺳ ﺎﻟﻴﺐ ﺍﻟﺘﺸ ﻜﻴﻞ ﻓ ﻲ ﺍﻟﺼ ﻨﺎﻋﺔ
ﺗﺤﺪﻳ ﺪ ﺃﻧﻤ ﺎﻁ ﺍﻻﻧﺴ ﻴﺎﺏ ﻓ ﻲ ﺗﺸ ﻜﻴﻞ، ﺍﻟﻄ ﺮﻕ ﺍﻟﺘﺤﻠﻴﻠﻴ ﺔ ﺍﻷﺳﺎﺳ ﻴﺔ،ﺍﻟﻠﺪﻭﻧ ﺔ ﺗﺤ ﺖ ﺗ ﺄﺛﻴﺮ ﺇﺟﻬ ﺎﺩﺍﺕ ﻣﺮﻛﺒ ﺔ
، ﻣﻴﻜﺎﻧﻴﻜ ﺎ ﺗﺸ ﻐﻴﻞ ﺍﻟﻤﻌ ﺎﺩﻥ: ﻧﻈﺮﻳ ﺎﺕ ﺗﺸ ﻐﻴﻞ ﺍﻟﻤﻌ ﺎﺩﻥ. ﻗﺎﺑﻠﻴ ﺔ ﺗﺸ ﻜﻴﻞ ﺍﻟﺼ ﻔﺎﺋﺢ ﺍﻟﻤﻌﺪﻧﻴ ﺔ،ﺍﻟﻤﻌ ﺎﺩﻥ
ﺍﻟﺸ ﻜﻞ، ﺍﻟﺤ ﺮﺍﺭﺓ ﻓ ﻲ ﺗﺸ ﻐﻴﻞ ﺍﻟﻤﻌ ﺎﺩﻥ، " ﻧﻈﺮﻳ ﺔ " ﺇﺭﻧﺴ ﺖ" ﻭ"ﻣﻴﺮﺷ ﻨﺖ،ﻋﻼﻗ ﺎﺕ ﺯﺍﻭﻳ ﺔ ﺍﻟﻘ ﺺ
ﺳ ﻮﺍﺋﻞ ﺍﻟﺘﺒﺮﻳ ﺪ، ﺗ ﺄﺛﻴﺮ ﻋﻮﺍﻣ ﻞ ﺍﻟﻘﻄ ﻊ، ﺃﻧ ﻮﺍﻉ ﺍﻟﺒﻠ ﻰ، ﻋﻤ ﺮ ﺍﻷﺩﺍﺓ ﻭﺑﻠ ﻰ ﺍﻷﺩﺍﺓ،ﺍﻟﻬﻨﺪﺳ ﻲ ﻷﺩﺍﺓ ﺍﻟﻘﻄ ﻊ
. ﺇﻗﺘﺼﺎﺩﺍﺕ ﺗﺸﻐﻴﻞ ﺍﻟﻤﻌﺎﺩﻥ،ﺃﺛﻨﺎء ﺍﻟﺘﺸﻐﻴﻞ
Forming processes in industry, classification of forming processes, objectives of metal
forming analysis. Yielding under combined stresses; Basic analytical methods;
determination of flow patterns in metal forming; formability of sheet metals. Theory of metal
cutting: mechanics of metal cutting, shear angle relationships, theory of Ernst and Merchant;
Temperature in metal cutting; Cutting tool geometry; Tool wear and tool life: types of wear,
effects of cutting parameters, cutting fluids; Economics of metal cutting.
ﺍﻟﺨﺘﻢ
King Saud University
College of Engineering
Mechanical Engineering
Department
ﻗﺴﻢ اﻟ ﻨﺪﺳﺔ اﳌﻴ ﺎﻧﻴﻜﻴﺔ
Course Level: 9 or 10 “Elective Course” " "ﻣﻘﺮﺭ ﺇﺧﺘﻴﺎﺭﻯ10 ﺍﻭ9 :ﻣﺴﺘﻮﻯ ﺍﻟﻤﻘﺮﺭ
ﺗﻘﻨﻴ ﺔ ﺍﻟﻤﺠﻤﻮﻋ ﺎﺕ، ﺍﻟ ﺘﺤﻜﻢ ﺍﻟﺮﻗﻤ ﻲ ﻭﺍﻟﺮﺑﻮﺗ ﺎﺕ ﺍﻟﺼ ﻨﺎﻋﻴﺔ، ﺍﻟﻤﺒ ﺎﺩﺉ ﺍﻷﺳﺎﺳ ﻴﺔ، ﺍﻵﻻﺕ ﺍﻟﺮﻗﻤﻴ ﺔ
ﻫﻨﺪﺳ ﺔ، ﺗﺸ ﻐﻴﻞ ﺍﻟﺴ ﺮﻋﺎﺕ ﺍﻟﻌﺎﻟﻴ ﺔ، ﻣﺮﺍﻛ ﺰ ﺍﻟﺘﺸ ﻐﻴﻞ، ﺧﻄ ﻮﻁ ﺍﻹﻧﺘ ﺎﺝ، ﻭﺃﻧﻈﻤ ﺔ ﺍﻹﻧﺘ ﺎﺝ ﺍﻟﻤﺮﻧ ﺔ
ﺍﻟﺘﺼ ﻤﻴﻢ ﺍﻟﻬﻨﺪﺳ ﻲ ﺍﻟﻤﻌﺎﺻ ﺮ، ﺣ ﻞ ﺍﻟﻤﺸ ﺎﻛﻞ ﻭﺍﻟﺘﻄ ﻮﻳﺮ ﺍﻟﻤﺴ ﺘﻤﺮ، ﺗﺨﻄ ﻴﻂ ﺍﻷﺳ ﺎﻟﻴﺐ: ﺍﻟﺘﺼ ﻨﻴﻊ
. ﺿﺒﻂ ﺍﻟﺠﻮﺩﺓ، ﺍﻟﺘﺤﻜﻢ ﻭﺗﺨﻄﻴﻂ ﺍﻹﻧﺘﺎﺝ، ﻟﻠﺘﺼﻨﻴﻊ
NC machines, basic principles; Numerical control and industrial robotics; Group technology
and flexible manufacturing systems; Production lines; Machining centers; High speed
machining; Manufacturing engineering: Process planning; Problem solving and continuous
improvement; Concurrent engineering design for manufacturability; Production planning
and control; Quality control
ﺍﻟﺨﺘﻢ
Course Level: 9 or 10 “Elective Course” " "ﻣﻘﺮﺭ ﺇﺧﺘﻴﺎﺭﻯ10 ﺍﻭ9 :ﻣﺴﺘﻮﻯ ﺍﻟﻤﻘﺮﺭ
ﻫ ﺬﺍﺍﻟﻤﻘﺮﺭ ﻳﻤﺜ ﻞ ﻣﻘ ﺮﺭ ﻣﺒ ﺪﺋﻰ ﻓ ﻰ ﺗﺸ ﻐﻴﻞ ﻣﺎﻛﻴﻨ ﺎﺕ ﺍﻟ ﺘﺤﻜﻢ ﺍﻟﺮﻗﻤ ﻰ ﻭﻛ ﺬﻟﻚ ﺍﻋ ﺪﺍﺩ ﺍﻟﺒ ﺮﺍﻣﺞ ﺍﻟﻼﺯﻣ ﻪ
ﻟﺘﺸﻐﻴﻞ ﻫﺬﻩ ﺍﻟﻤﺎﻛﻴﻨﺎﺕ
Computer Numerical Control Simplified, Steve Krar, Arthur Gill and Peter Smid,
Industrial Press Inc., New York, ISBN 0-8311-3133-0
According to Approved Mechanical
ﻁﺒﻘﺎ ً ﻟﻠﺨﻄﺔ ﺍﻟﻤﻌﺘﻤﺪﺓ ﻟﻘﺴﻢ ﺍﻟﻬﻨﺪﺳﺔ ﺍﻟﻤﻴﻜﺎﻧﻴﻜﻴﺔ ﺍﺑﺘﺪﺍء ﻣﻦ
Engineering Department Plan Starting from
ﻫـ1440/1439 ﺍﻟﻌﺎﻡ ﺍﻟﺠﺎﻣﻌﻲ
Academic Year 2018/2019 G
*The official teaching language at the college of engineering is English.
**(X, Y, L) X = Lectures; Y = Tutorials; L = Lab
ﺍﻟﺨﺘﻢ
Course Level: 9 or 10 “Elective Course” " "ﻣﻘﺮﺭ ﺇﺧﺘﻴﺎﺭﻯ10 ﺍﻭ9 :ﻣﺴﺘﻮﻯ ﺍﻟﻤﻘﺮﺭ
ﺍﻟﻤﺘﻄﻠﺒ ﺎﺕ. ﻣﻘﺎﺭﻧ ﺎﺕ ﺑﺎﻧﻈﻤ ﺔ ﺍﻟﻨﻘ ﻞ ﺍﻷﺧ ﺮﻯ.ﻣﻘﺪﻣ ﺔ ﺗﺎﺭﻳﺨﻴ ﺔ ﻋ ﻦ ﺗﺼ ﺎﻣﻴﻢ ﺍﻟﺴ ﻜﻚ ﺍﻟﺤﺪﻳﺪﻳ ﺔ
ﺍﻻﻗﺘﺼ ﺎﺩﻳﺔ ﻭﺍﻟﻤ ﻮﺍﺭﺩ ﻭﺍﻻﺳ ﺘﺮﺍﺗﻴﺠﻴﺔ؛ ﺍﻟﻄﻠ ﺐ ﻭﺍﻟﺴ ﻌﺔ؛ ﻋﻤﻠﻴ ﺎﺕ ﺍﻟﺴ ﻜﻚ ﺍﻟﺤﺪﻳﺪﻳ ﺔ؛ ﺗﺼ ﺎﻣﻴﻢ ﺍﻟﺴ ﻜﻚ
ﺍﻟﻤﻌ ﺎﺑﺮ؛ ﺍﻟﺒﻄﺎﻧﻴ ﺎﺕ، ﺍﻟﺠﺴ ﻮﺭ،ﺍﻟﺤﺪﻳﺪﻳ ﺔ ﺍﻟﺤﺪﻳﺜ ﺔ؛ ﺍﺧﺘﻴ ﺎﺭ ﺍﻟﻤﻘﻴ ﺎﺱ؛ ﺍﻟﺠ ﺮ ﻭﺍﻟﺘﺤﻤﻴ ﻞ؛ ﺍﻟﻤﻨﺼ ﺎﺕ
. ﺍﻟﻤﻨﺤﻨﻴ ﺎﺕ ﻭﺍﻟﺘ ﺪﺭﺟﺎﺕ. ﻋﺠﻠ ﺔ ﺍﻟﺴ ﻜﻚ ﺍﻟﺤﺪﻳﺪﻳ ﺔ. ﺍﻟﺒﺮﺍﻏ ﻲ ﻭﺍﻟﻠﺤ ﺎﻡ، ﺍﻟﺨﺮﺳ ﺎﻧﺔ، ﺍﻟﺒﻨ ﺎء،ﺍﻟﺮﻣﻠﻴ ﺔ
ﺍﻹﺟﻬ ﺎﺩﺍﺕ، ﺍﻟﻔﺸ ﻞ، ﺍﻟﻌﻤ ﺮ ﺍﻻﻓﺘﺮﺍﺿ ﻲ: ﺗﺼ ﻤﻴﻢ ﺍﻟﻌﺠ ﻼﺕ؛ ﺍﻟﻤﺸ ﺎﻛﻞ ﺍﻟﻤﻴﻜﺎﻧﻴﻜﻴ ﺔ.ﺃﺣﻤ ﺎﻝ ﺍﻟﻤﺴ ﺎﺭ
. ﺗﻌﻘﺐ ﺍﻟﻌﻴﻮﺏ ﻋﻠﻰ ﺍﻟﻤﺴﺎﺭ. ﺍﻟﻤﺮﻭﻧﺔ، ﺍﻹﻧﻔﻌﺎﻝ،ﺍﻟﺤﺮﺍﺭﻳﺔ
Introduction and History of Railway Design; Comparisons to Other Transport Systems;
Economy, Requirements, Resources and Strategy; Demand Tariffs and Capacity; Rolling
Stock; Railway Operations; Modern Railways Designs; Gauge Selection; Railway Traction
and Loading; Route Design; Platforms, Bridges, Crossings, Canopies and Depots; Sand
Blankets, Drains, Masonry, Fasteners, Concrete, Bolts and Welds; Sleeper, Ballast and Sub-
Beds; Wheel-Rail Interface; Curves and Gradients; Track Loads; Wheel Design; Mechanical
Problems: Life-time, Failures, Thermal, Stresses, Strains, Elasticity, Wear and Creep Issues.
Track Defects
ﺍﻟﺨﺘﻢ
King Saud University
College of Engineering
Mechanical Engineering
Department
ﻗﺴﻢ اﻟ ﻨﺪﺳﺔ اﳌﻴ ﺎﻧﻴﻜﻴﺔ
Course Level: 9 or 10 “Elective Course” " "ﻣﻘﺮﺭ ﺇﺧﺘﻴﺎﺭﻯ10 ﺍﻭ9 :ﻣﺴﺘﻮﻯ ﺍﻟﻤﻘﺮﺭ
ﺍﻟﻤﺒ ﺎﺩﺉ ﺍﻷﺳﺎﺳ ﻴﺔ ﻭﺍﻟﻤﻌ ﺎﺩﻻﺕ ﻓ ﻲ ﺍﻟﺴ ﺮﻳﺎﻥ ﻏﻴ ﺮ ﺍﻟﻤﻨﻀ ﻐﻂ ﻭﻋ ﺪﻳﻢ ﺍﻟﻠﺰﻭﺟ ﺔ ؛ ﺍﻟﺘﺤ ﻮﻳﻼﺕ ﺍﻟﻤﻄﺎﺑﻘ ﺔ
؛ ﺍﻟﺴ ﺮﻳﺎﻥ ﺣ ﻮﻝ ﻣﻘ ﺎﻁﻊ ﺍﻷﺟﻨﺤ ﺔ ؛ ﻧﻈﺮﻳ ﺔ ﺍﻷﺟﻨﺤ ﺔ ﺍﻟﺮﻗﻴﻘ ﺔ ؛ ﺷ ﺮﻁ ﻛﻮﺗ ﺎ ؛ ﻁﺮﻳﻘ ﺔ ﺍﻷﻟ ﻮﺍﺡ ؛
. ﺍﻟﺴﺮﻳﺎﻥ ﺣﻮﻝ ﺍﻷﺟﻨﺤﺔ ﺫﺍﺕ ﺍﻷﺑﻌﺎﺩ ﺍﻟﻤﺤﺪﻭﺩﺓ ؛ ﻧﻈﺮﻳﺔ ﺍﻟﺨﻂ ﺍﻟﺮﺍﻓﻊ ؛ ﻁﺮﻳﻘﺔ ﺍﻟﺸﺒﻜﺔ ﺍﻟﺪﻭﺍﻣﻴﺔ
ﺍﻟﺨﺘﻢ
Course Level: 9 or 10 “Elective Course” " "ﻣﻘﺮﺭ ﺇﺧﺘﻴﺎﺭﻯ10 ﺍﻭ9 :ﻣﺴﺘﻮﻯ ﺍﻟﻤﻘﺮﺭ
ﺧ ﻮﺍﺹ ﺍﻟﺠ ﻮ ﺍﻟﻘﻴﺎﺳ ﻲ ؛ ﻣﻘ ﺎﻁﻊ ﺍﻷﺟﻨﺤ ﺔ ﻭﺍﻷﺟﻨﺤ ﺔ ﻭﺍﻟﻤﻜﻮﻧ ﺎﺕ ﺍﻟﺪﻳﻨﺎﻣﻴﻜﻴ ﺔ ﺍﻟﻬﻮﺍﺋﻴ ﺔ ﺍﻷﺧ ﺮﻯ ؛ ﻗ ﻮﻯ
، ﺍﻟﺼ ﻤﻮﺩ، ﺍﻟﻤ ﺪﻯ، ﻣﻌ ﺪﻝ ﺍﻟﺼ ﻌﻮﺩ: ﺍﻟﺮﻓ ﻊ ﻭﺍﻟﺠ ﺮ ﻭﺍﻟﻌ ﺰﻭﻡ ؛ ﻣﻌ ﺎﺩﻻﺕ ﺍﻟﺤﺮﻛ ﺔ ؛ ﺃﺩﺍء ﺍﻟﻄ ﺎﺋﺮﺓ
. ﺍﻹﻗﻼﻉ ﻭﺍﻟﻬﺒﻮﻁ ؛ ﺍﻻﺳﺘﻘﺮﺍﺭ ﻭﺍﻟﺘﺤﻜﻢ ؛ ﻋﻠﻢ ﺍﻟﻔﻀﺎء
Properties of standard atmosphere; Airfoils, wings, and other aerodynamic components; Lift,
drag, and moments; Equations of motion; Airplane performance: Rate of climb, range,
endurance, take off, and landing; Stability and control; Astronautics.
ﺍﻟﺨﺘﻢ
Course Level: 9 or 10 “Elective Course” " "ﻣﻘﺮﺭ ﺇﺧﺘﻴﺎﺭﻯ10 ﺍﻭ9 :ﻣﺴﺘﻮﻯ ﺍﻟﻤﻘﺮﺭ
" ﺟﻨ ﺎﺡ ﻣﺴ ﺘﻮ، ﻟ ﻲ ﻣﻘﻄ ﻊ ﺟﻨ ﺎﺡ ﻣﺜ ﺎﻟﻲ، ﺍﻟﻤﺮﻭﻧ ﺔ ﺍﻟﻬﻮﺍﺋﻴ ﺔ ﺍﻟﺜﺎﺑﺘ ﺔ، ﻣﻘﺪﻣ ﺔ ﻓ ﻲ ﺍﻟﻤﺮﻭﻧ ﺔ ﺍﻟﻬﻮﺍﺋﻴ ﺔ
ﺩﻳﻨﺎﻣﻴﻜ ﺎ، ﺍﻟﻄ ﺎﺋﺮﺓ ﺫﺍﺕ ﺍﻟﺠﻨ ﺎﺡ ﺍﻟﻤﺎﺳ ﺢ، ﺍﻟﻄ ﺎﺋﺮﺓ ﺫﺍﺕ ﺍﻟﺠﻨ ﺎﺡ ﺍﻟﻌ ﺪﻝ، ﻋ ﺪﻝ " ﻓ ﻲ ﺍﻟﺘ ﺪﻓﻖ ﺍﻟﻬ ﻮﺍﺋﻲ
ﺍﻫﺘ ﺰﺍﺯ، ﺍﻟ ﻼ ﺇﺳ ﺘﻘﺮﺍﺭ ﺍﻻﺳ ﺘﺎﺗﻴﻜﻲ ﻭﺍﻟ ﺪﻳﻨﺎﻣﻴﻜﻲ، ﺍﺳ ﺘﻌﺮﺍﺽ ﻟﻤﺸ ﺎﻛﻞ ﺍﻻﻫﺘ ﺰﺍﺯ، ﺍﻟﻤﺮﻭﻧ ﺔ ﺍﻟﻬﻮﺍﺋﻴ ﺔ
. ﻣﻘﻄﻊ ﺟﻨﺎﺡ ﻣﺜﺎﻟﻲ
Introduction to aeroelasticity, static aeroelasticity, Twisting of typical wing section, Straight
wing in a wind tunnel, Straight wing aircraft, Swept wing aircraft, Dynamic aeroelasticity,
Review of vibration problems, Static and dynamic instabilities, Flutter of a typical wing
section.
ﺍﻟﺨﺘﻢ
Course Level: 9 or 10 “Elective Course” " "ﻣﻘﺮﺭ ﺇﺧﺘﻴﺎﺭﻯ10 ﺍﻭ9 :ﻣﺴﺘﻮﻯ ﺍﻟﻤﻘﺮﺭ
ﺍﻟ ﺪﻭﺭﺓ ﺍﻟﻘﻴﺎﺳ ﻴﺔ ﻭﺗﻌ ﺪﻳﻼﺗﻬﺎ ؛ ﺍﻟﻀ ﻮﺍﻏﻂ ؛ ﺍﻟﻤﻜﺜﻔ ﺎﺕ ؛ ﺍﻟﻤﺒﺨ ﺮﺍﺕ ؛: ﺃﻧﻈﻤ ﺔ ﺍﻟﺘﺒﺮﻳ ﺪ ﺑﻀ ﻐﻂ ﺍﻟﺒﺨ ﺎﺭ
ﻭﺳ ﺎﺋﻞ ﺍﻟﺘﻤ ﺪﺩ ؛ ﺗﺤﻠﻴ ﻞ ﺍﻟﻤﻨﻈﻮﻣ ﺔ ؛ ﺍﻷﻧﻈﻤ ﺔ ﻣﺘﻌ ﺪﺩﺓ ﺍﻟﻀ ﻐﻮﻁ ؛ ﺃﻧﻈﻤ ﺔ ﺍﻟﺘﺒﺮﻳ ﺪ ﺑﺎﻻﻣﺘﺼ ﺎﺹ ؛ ﻧﻈ ﺎﻡ
. ﺍﻟﺪﻭﺭﺓ ﻭﺗﻌﺪﻳﻼﺗﻬﺎ ؛ ﺍﻷﻧﻈﻤﺔ ﺍﻟﻤﺮﻛﺒﺔ ؛ ﺃﻧﻈﻤﺔ ﺍﻟﻤﺎء ﻭﺍﻟﻨﺸﺎﺩﺭ: ﺑﺮﻭﻣﻴﺪ ﺍﻟﻠﻴﺜﻴﻮﻡ
ﺍﻟﺨﺘﻢ
Course Pre-requisite: ME 378 Heat Transfer ﻫﻤﻚ ﺍﻧﺘﻘﺎﻝ ﺍﻟﺤﺮﺍﺭﺓ378 :ﺍﻟﻤﺘﻄﻠﺒﺎﺕ ﺍﻟﺴﺎﺑﻘﺔ
Course Level: 9 or 10 “Elective Course” " "ﻣﻘﺮﺭ ﺇﺧﺘﻴﺎﺭﻯ10 ﺍﻭ9 :ﻣﺴﺘﻮﻯ ﺍﻟﻤﻘﺮﺭ
ﺃﻧﻈﻤ ﺔ ﺗﻜﻴﻴ ﻒ ﺍﻟﻬ ﻮﺍء ؛ ﺗﻄﺒﻴﻘ ﺎﺕ ﻋﻠ ﻰ ﺗﺴ ﺨﻴﻦ ﻭﺗﺒﺮﻳ ﺪ ﺍﻟﻬ ﻮﺍء ﻭﺍﻟﺘﻬﻮﻳ ﺔ ؛ ﻋﻤﻠﻴ ﺎﺕ ﺗﻜﻴﻴ ﻒ ﺍﻟﻬ ﻮﺍء
ﺍﻷﺳﺎﺳ ﻴﺔ ؛ ﻧﻮﻋﻴ ﺔ ﺍﻟﻬ ﻮﺍء ؛ ﺍﻧﺘﻘ ﺎﻝ ﺍﻟﺤ ﺮﺍﺭﺓ ﻓ ﻲ ﺍﻟﻤﺒ ﺎﻧﻲ ؛ ﺍﻹﺷ ﻌﺎﻉ ﺍﻟﺸﻤﺴ ﻲ ؛ ﺣﺴ ﺎﺑﺎﺕ ﺍﻷﺣﻤ ﺎﻝ ؛
. ﺗﺼﻤﻴﻢ ﺍﻷﻧﺎﺑﻴﺐ ﻭﺍﻟﻘﻨﻮﺍﺕ ﻭﺗﻮﺯﻳﻊ ﺍﻟﻬﻮﺍء ؛ ﺍﺧﺘﻴﺎﺭ ﺍﻟﻤﻌﺪﺍﺕ ؛ ﺍﻟﺘﺤﻜﻢ ﻓﻲ ﺍﻟﺘﻬﻮﻳﺔ ﻭﺍﻟﺘﻜﻴﻴﻒ
Air conditioning systems; HVAC applications; Basic air conditioning processes; Indoor air
quality; Heat transmission in buildings; Solar radiation; Load calculations; Pipes and ducts
design; Air distribution; Equipment selection; HVAC control.
F. C .McQuiston, J.D. Parker, and J.D. Spitler, Heating, Ventilating, and Air Conditioning
Analysis and Design, 6th Edition, John Wiley & Sons.
According to Approved Mechanical
ﻁﺒﻘﺎ ً ﻟﻠﺨﻄﺔ ﺍﻟﻤﻌﺘﻤﺪﺓ ﻟﻘﺴﻢ ﺍﻟﻬﻨﺪﺳﺔ ﺍﻟﻤﻴﻜﺎﻧﻴﻜﻴﺔ ﺍﺑﺘﺪﺍء ﻣﻦ
Engineering Department Plan Starting from
ﻫـ1440/1439 ﺍﻟﻌﺎﻡ ﺍﻟﺠﺎﻣﻌﻲ
Academic Year 2018/2019 G
*The official teaching language at the college of engineering is English.
**(X, Y, L) X = Lectures; Y = Tutorials; L = Lab
ﺍﻟﺨﺘﻢ
Course Level: 9 or 10 “Elective Course” " "ﻣﻘﺮﺭ ﺇﺧﺘﻴﺎﺭﻯ10 ﺍﻭ9 :ﻣﺴﺘﻮﻯ ﺍﻟﻤﻘﺮﺭ
ﺍﻟﻨﻈﺮﻳ ﺔ ﺍﻷﻭﻟﻴ ﺔ ﻟﻺﻧﺨﻼﻋ ﺎﺕ ﺍﻟﺴ ﺎﻛﻨﺔ، ﻭﺍﻟﻠ ﺰﺝ ﺍﻟﻤ ﺮﻥ ؛ ﻭﺍﻟﻠ ﺪﻥ ﻟﻠﻤ ﻮﺍﺩ، ﺃﺳﺎﺳ ﻴﺎﺕ ﺍﻟﺘﺸ ﻮﻩ ﺍﻟﻤ ﺮﻥ
. ﺍﻟﺘﺰﺣﻒ ﻭﺁﻟﻴﺎﺕ ﺯﻳﺎﺩﺓ ﺍﻟﻤﺘﺎﻧﺔ، ﺍﻟﻜﻼﻝ، ﺍﻟﻜﺴﺮ، ﻭﺍﻟﺪﻳﻨﺎﻣﻴﻜﻴﺔ
ﺍﻟﺨﺘﻢ
*
Course Code and Number: ME452* ﻫﻤﻚ452 :ﺍﻟﺮﻗﻢ ﻭﺍﻟﺮﻣﺰ
ﺍﻟﺴﺒﺎﺋﻚ ﺍﻟﺤﺪﻳﺪﻳﺔ: ﺗﺼﻨﻴﻒ ﺍﻟﻤﻌﺎﺩﻥ ﻭﺍﻟﺴﺒﺎﺋﻚ، ﺍﻟﻤﻌﺎﻟﺠﺔ ﺍﻟﺤﺮﺍﺭﻳﺔ، ﻣﺨﻄﻄﺎﺕ ﺍﻟﻄﻮﺭ، ﺍﻻﻧﺼﻬﺎﺭ ﻭﺍﻟﺘﺠﻤﺪ، ﺍﻟﺒﻨﻴﺔ ﻭﺍﻟﻄﻮﺭ
. ﺍﻟﺼﺪﺃ ﻭﺍﻟﺤﻤﺎﻳﺔ ﺿﺪ ﺍﻟﺼﺪﺃ، ﻁﺮﻕ ﺍﻟﺘﺸﻮﻩ ﻭﺍﻟﺘﺨﻤﻴﺮ، ﻭﻏﻴﺮ ﺍﻟﺤﺪﻳﺪﻳﺔ
Structure and Phase; Melting and Solidification; Phase diagrams; Heat treatment;
Classification of metals and Alloys: Ferrous and Non-ferrous alloys; Deformation and
Annealing Processes; Corrosion and Corrosion Protection
ا ﺘﻢ
*
Course Code and Number: ME 453 * ﻫﻤﻚ453 :ﺍﻟﺮﻗﻢ ﻭﺍﻟﺮﻣﺰ
Course Title: Intermediate Mechanics of
ﻣﻴﻜﺎﻧﻴﻜﺎ ﺍﻟﻤﻮﺍﺩ ﺍﻟﻤﺘﻮﺳﻂ:ﺍﺳﻢ ﺍﻟﻤﻘﺮﺭ
Materials
Credit Hours: 3(3, 0, 0) ** **
(0, 0, 3) 3 :ﺍﻟﺴﺎﻋﺎﺕ ﺍﻟﻤﻌﺘﻤﺪﺓ
Course Pre-requisite: ME304 Mechanical ﻫﻤﻚ ﺍﻟﺘﺼﻤﻴﻢ ﺍﻟﻬﻨﺪﺳﻲ ﺍﻟﻤﻴﻜﺎﻧﻴﻜﻲ304 :ﺍﻟﻤﺘﻄﻠﺒﺎﺕ ﺍﻟﺴﺎﺑﻘﺔ
Engineering Design I I
Course Co-requisite: - - :ﺍﻟﻤﺘﻄﻠﺒﺎﺕ ﺍﻟﻤﺮﺍﻓﻘﺔ
ﻣﺮﻛ ﺰ، ﺛﻨ ﻲ ﺍﻟﻌ ﻮﺍﺭﺽ ﺫﺍﺕ ﺍﻟﻤﻘ ﺎﻁﻊ ﺍﻟﻐﻴ ﺮ ﻣﺘﻨ ﺎﻅﺮﺓ، " ﻧﻈﺮﻳ ﺔ " ﺑﻴﺘ ﻲ، ﺍﺳ ﺘﻌﺮﺍﺽ ﻁ ﺮﻕ ﺍﻟﻄﺎﻗ ﺔ
، ﺍﻻﺟﻬ ﺎﺩﺍﺕ ﺍﻟﻐﺸ ﺎﺋﻴﺔ ﻓ ﻲ ﺍﻟﻬﻴﺎﻛ ﻞ ﺍﻟﻘﺸ ﺮﻳﺔ ﺍﻟﻤﺘﻨ ﺎﻅﺮﺓ، ﺍﻟﻘ ﺺ ﻭﺍﻟﻠ ﻲ ﻟﻠﻤﻘ ﺎﻁﻊ ﺫﺍﺕ ﺍﻟﺠ ﺪﺭﺍﻥ ﺍﻟﺮﻗﻴﻘ ﺔ
ﺍﻟﺜﻨ ﻲ ﺍﻟﻤ ﺮﻥ ﻟﻸﻟ ﻮﺍﺡ ﺍﻟﻤﺴ ﺘﻄﻴﻠﺔ، ﺍﻟﺜﻨ ﻲ ﻏﻴ ﺮ ﺍﻟﻤﺘﻨ ﺎﻅﺮ ﻟﻸﻟ ﻮﺍﺡ ﺍﻟﺪﺍﺋﺮﻳ ﺔ، ﺍﻟﺜﻨ ﻲ ﻭﺍﻟﻠ ﻲ ﺍﻟﻤ ﺮﻥ ـ ﺍﻟﻠ ﺪﻥ
ﺍﻟﺜﻨ ﻲ، ﺍﻟﻌ ﻮﺍﺭﺽ ﺍﻟﻤﺤﻤﻠ ﺔ ﻋﻠ ﻰ ﺃﺭﺿ ﻴﺎﺕ ﻣﺮﻧ ﺔ، ﺑﻤ ﺎ ﻓ ﻲ ﺫﻟ ﻚ ﺍﻟﻤﺴ ﺎﺋﻞ ﻏﻴ ﺮ ﺍﻟﻤﺘﻨ ﺎﻅﺮﺓ، ﻭﺍﻟﺪﺍﺋﺮﻳ ﺔ
. ﻓﻲ ﺍﻟﻤﻘﺎﻁﻊ ﻏﻴﺮ ﺍﻟﺪﺍﺋﺮﻳﺔ: ﺗﺤﻠﻴﻞ ﺍﻟﻠﻲ، ﺍﻟﻤﺘﻨﺎﻅﺮ ﻟﻠﻬﻴﺎﻛﻞ ﺍﻷﺳﻄﻮﺍﻧﻴﺔ ﺍﻟﻘﺸﺮﻳﺔ
Review of energy methods, Betti's reciprocal theorem; bending of beams of asymmetrical
cross-section; shear center and torsion of thin-walled sections; membrane stresses in
axisymmetric shells; elastic-plastic bending and torsion; axisymmetric bending of circular
plates; elastic, bending of rectangular and circular plates, including asymmetric problems;
beams on elastic foundations; axisymmetric bending of cylindrical shells; Analysis of torsion:
non-circulation sections.
J. P. Den Hartog, Advanced Strength of Materials, Textbook Publishers, 2003.
ا ﺘﻢ
، ﻫﻴﺎﻛ ﻞ ﺍﻟﻄ ﺎﺋﺮﺍﺕ، ﺍﻟﻼﺇﺳ ﺘﻘﺮﺍﺭﻳﺔ ﻓ ﻲ ﺍﻟﻬﻴﺎﻛ ﻞ، ﺛﻨ ﻲ ﺍﻷﻟ ﻮﺍﺡ ﺍﻟﺮﻗﻴﻘ ﺔ،ﻁ ﺮﻕ ﺍﻟﻄﺎﻗ ﺔ ﻓ ﻲ ﺗﺤﻠﻴ ﻞ ﺍﻟﻬﻴﺎﻛ ﻞ
ﺍﻟﻠ ﻲ ﻭﺍﻟﻘ ﺺ ﻭﺗﺤﻠﻴ ﻞ ﺍﻹﺟﻬ ﺎﺩﺍﺕ،ﺍﻟﻤﻜﻮﻧ ﺎﺕ ﺍﻟﺮﺋﻴﺴ ﻴﺔ ﻟﻬﻴﺎﻛ ﻞ ﺍﻟﻄ ﺎﺋﺮﺍﺕ ﻭﺃﻧ ﻮﺍﻉ ﺍﻷﺣﻤ ﺎﻝ ؛ ﺍﻟﺜﻨ ﻲ
ﻁﺮﻳﻘ ﺔ ﺗﺤﻠﻴ ﻞ ﺍﻟﻤﻨﺸ ﺂﺕ ﺍﻟﻤﺮﻛﺒ ﺔ ﻣ ﻦ، ﻟﻌﻨﺎﺻ ﺮ ﺍﻟﻬﻴﻜ ﻞ ﺍﻷﺳﺎﺳ ﻴﺔ ﻭ ﺍﻟﻌﺎﺭﺿ ﺎﺕ ﺫﺍﺕ ﺍﻟﺴ ﻤﺎﻛﺔ ﺍﻟﺮﻗﻴﻘ ﺔ
ﻣﺸ ﺮﻭﻉ، ﺍﻟﺨ ﻮﺍﺹ ﺍﻟﻤﻴﻜﺎﻧﻴﻜﻴ ﺔ ﻟﻤ ﻮﺍﺩ ﺍﻟﻌﺮﺑ ﺎﺕ؛ ﻣﻘﺎﺭﻧ ﺎﺕ ﻧﺴ ﺒﺔ ﺍﻟﻤﺘﺎﻧ ﺔ ﻟﻠ ﻮﺯﻥ ﻓ ﻲ ﺍﻟﻤ ﻮﺍﺩ، ﻁﺒﻘ ﺎﺕ
. ﻓﺼﻠﻲ
Energy methods of structural analysis, bending of thin plates, structural instability, aircraft
structure, airframe loads, bending, shear, and torsion of open and close thin-walled beam.
Stress analysis of aircraft components, matrix methods of structural analysis, mechanical
properties of vehicle materials, strength-weight comparisons of
ا ﺘﻢ
Donald E. Malen, Fundamentals of Automobile Body Structure Design, SAE International, 2011.
ا ﺘﻢ
، ﻧﻈﺮﻳﺔ ﺍﻟﺮﻗﺎﺋﻖ، ﺍﻟﻤﺮﻭﻧﺔ ﺍﻟﻤﺘﻌﺪﺩﺓ ﺍﻟﻤﺤﺎﻭﺭ، ﺗﺤﻠﻴﻞ ﺍﻹﺟﻬﺎﺩ ـ ﻭﺍﻻﻧﻔﻌﺎﻝ ﻓﻲ ﺍﻟﻤﻮﺍﺩ ﺍﻟﻤﺮﻛﺒﺔ ﺫﺍﺕ ﺍﻷﻟﻴﺎﻑ ﺍﻟﻤﺘﻮﺍﺻﻠﺔ
. ﻋﻨﺪ ﺗﻄﺒﻴﻘﻬﺎ ﻋﻠﻰ ﻫﻴﺎﻛﻞ ﻣﺼﻨﻌﺔ ﻣﻦ ﻣﻮﺍﺩ ﻣﺮﻛﺒﺔ ﻣﻦ ﺍﻟﻠﺪﺍﺋﻦ، ﻭﻓﻠﺴﻔﺔ ﺍﻟﺘﺼﻤﻴﻢ، ﻧﻈﺮﻳﺎﺕ ﺍﻻﻧﻬﻴﺎﺭ
Stress and strain analysis of continuous fiber composite materials. Orthotropic elasticity,
lamination theory, failure criterion, and design philosophies, as applied to structural
polymeric composites.
ا ﺘﻢ
ا ﺘﻢ
Single degree of freedom systems: un damped and damped free vibrations and forced
vibrations, multi-degree of freedom systems, vibration absorbers and isolators, basics of
rotating machinery fault diagnosis.
ا ﺘﻢ
ﺗﺼ ﻤﻴﻢ ﺍﻟ ﺪﻭﺍﺋﺮ ﺍﻟﺒﻴﻨﻴ ﺔ ﺍﻻﻟﻜﺘﺮﻭﻧﻴ ﺔ، ﺍﻟﺘﻄﺒﻴﻘ ﺎﺕ ﻭﺍﻟ ﺘﺤﻜﻢ، ﻧﻤﺬﺟ ﺔ ﺍﻟﻤﻨﻈﻮﻣ ﺎﺕ ﺍﻟﻜﻬﺮﻭﻣﻴﻜﺎﻧﻴﻜﻴ ﺔ
ﺍﺟﻬ ﺰﺓ ﺍﻟ ﺘﺤﻜﻢ: ﺍﻟﺘﺼ ﻔﻴﺔ ﻭﺍﻟﺘﻌ ﺪﻳﻞ، ﺃﺧ ﺬ ﺍﻹﺷ ﺎﺭﺍﺕ، ﺗﻘﻨﻴ ﺔ ﺍﻟﻤﺠﺴ ﺎﺕ.ﻭﺍﻟ ﺘﺤﻜﻢ ﻟﻼﺟﻬ ﺰﺓ ﺍﻟﻤﻴﻜﺎﻧﻴﻜﻴ ﺔ
ﺇﺳ ﺘﺮﺍﺗﻴﺠﻴﺔ ﺍﻟﺘﻄﺒﻴ ﻖ ﻭﺍﻟﺘﺮﻛﻴ ﺐ. ﺍﻟﻤﻌﺘﻤ ﺪﺓ ﻋﻠ ﻰ ﺍﻟﺤﺎﺳ ﺐ ﻟﻠ ﺘﺤﻜﻢ ﺑﺎﻟ ﺪﻭﺍﺋﺮ ﺍﻟﻤﻐﻠﻘ ﺔ ﻭﺃﺟﻬ ﺰﺓ ﺍﻻﺗﺼ ﺎﻻﺕ
.ﻭﺍﻻﺧﺘﺒﺎﺭ ﻟﻠﻤﺠﺴﺎﺕ ﻭﺍﻟﻤﻔﻌﻼﺕ )ﺍﻟﻤﺸﻐﻼﺕ( ﺍﻟﻤﺘﺤﻜﻤﺎﺕ ﺍﻟﺮﻗﻤﻴﻪ ﻭﺑﺮﻣﺠﺘﻬﺎ
David Pessen. Industrial automation: circuits and components, Wiley, latest edition.
ا ﺘﻢ
ﻭﺍﻟﺼﻴﺎﻧﺔ ﻟﻶﻻﺕ ﺍﻟﺪﻭﺍﺭﺓ ﻣﻊ ﺍﻟﺘﺮﻛﻴﺰ ﻋﻠﻰ ﺍﻟﻤﻮﺍﺿﻴﻊ، ﻭﺍﻟﺘﺸﻐﻴﻞ، ﻣﻮﺍﺿﻴﻊ ﺍﻟﺘﺤﻠﻴﻞ ﻭﺍﻹﺟﺮﺍءﺍﺕ ﺍﻟﻤﺮﺗﺒﻄﺔ ﺑﺎﻟﺪﻳﻨﺎﻣﻴﻜﺎ
ﺃﺧﺬ ﺍﻟﻌﻴﻨﺎﺕ ﻣﻦ ﺍﻟﺰﻳﺖ ﻭﺣﺒﻴﺒﺎﺕ ﺍﻟﺘﺂﻛﻞ، ﻣﻘﺪﻣﺔ ﻓﻲ ﺩﻳﻨﺎﻣﻴﻜﺎ ﺍﻟﻘﻠﻮﺏ ﺍﻟﺪﻭﺍﺭﺓ، ﺗﺤﻠﻴﻞ ﺍﻻﻫﺘﺰﺍﺯﺍﺕ، ﺍﻟﺨﺎﺻﺔ ﺑﺎﻵﻻﺕ ﺍﻟﺘﺮﺑﻴﻨﻴﺔ
ﻣﻌﺪﺍﺕ ﺍﻟﻤﺮﺍﻗﺒﺔ ﺍﻟﻤﺴﺘﺨﺪﻣﺔ ﻓﻲ ﺻﻨﺎﻋﺎﺕ، ﺩﺭﺍﺳﺎﺕ ﻟﺤﺎﻻﺕ ﺻﻨﺎﻋﻴﺔ، ﻣﻮﺍﺿﻴﻊ ﺧﺎﺻﺔ ﺑﺎﻟﻤﺤﺎﻣﻞ ﻭﺻﻨﺎﺩﻳﻖ ﺍﻟﺘﺮﻭﺱ،
. ﺍﻟﺒﺘﺮﻭﻛﻴﻤﺎﻭﻳﺎﺕ ﻭﻣﺤﻄﺎﺕ ﺗﻮﻟﻴﺪ ﺍﻟﻄﺎﻗﺔ
Techniques and analysis issues associated with the dynamics, operation, and maintenance of
rotating machinery with a focus on turbo machinery issues; Vibration analysis, introductory
rotor dynamics, oil and wear particle sampling, gearbox and bearing issues, and industrial
case studies; Monitoring instrumentation in common use throughout the petrochemical and
power generation industries.
ا ﺘﻢ
، ﺃﺷﻜﺎﻝ ﺍﻟﺮﺑﻮﺗﺎﺕ، ﺣﺮﻛﺔ ﺍﻷﺟﺴﺎﻡ ﺍﻟﺠﺎﺳﺌﺔ ﻓﻲ ﻣﺴﺘﻮﻯ، ﺗﺎﺭﻳﺦ ﺍﻟﺘﻘﻨﻴﺔ ﻭﺍﻟﺮﺑﻮﺗﺎﺕ ﺍﻟﻤﺴﺘﻘﺒﻠﻴﺔ، ﺍﻟﺮﺑﻮﺗﺎﺕ ﺍﻟﺸﺎﺋﻌﺔ، ﺗﻌﺎﺭﻳﻒ
ﺩﺭﺍﺳﺔ ﺣﺮﻛﺔ ﺍﻟﻮﺻﻼﺕ ﺑﺎﻟﻄﺮﻳﻘﺔ ﺍﻟﻌﺎﺩﻳﺔ ﻭﺍﻟﻌﻜﺴﻴﺔ ﻓﻲ. ﻭﺍﻹﺣﺪﺍﺛﻴﺎﺕ، ﻭﺍﻷﺷﻜﺎﻝ ﺍﻟﻬﻨﺪﺳﻴﺔ، ﻭﻋﻨﺎﺻﺮ ﺍﻟﺮﺑﻂ، ﺍﻟﻮﺻﻼﺕ
، ﻭﻁﺮﻳﻘﺔ ﺍﻟﻤﺴﻚ، ﺍﻻﺳﺘﺎﺗﻴﻜﺎ، ﺗﺤﺪﻳﺪ ﺍﻟﻤﺴﺎﺭ، " ﺍﻟﺮﺑﻮﺕ " ﺍﻟﺠﺎﻛﻮﺑﻲ، ﻣﺴﺘﻮﻯ ﺍﻟﻤﻌﺼﻢ ﻭﺍﻟﺮﺑﻮﺗﺎﺕ ﺍﻟﺜﻼﺛﻴﺔ ﺍﻷﺑﻌﺎﺩ
. ﻭﺍﻟﺪﻳﻨﺎﻣﻴﻜﺎ ﻭﺍﻟﺘﺤﻜﻢ
Definitions, popular robots, history of technology, and future robots. Planar and spatial rigid
body motion. Robot configurations, links, joints, geometry, and coordinates. Forward
kinematics and inverse kinematics of planar, 3-R wrist, and 3D robots. Robot Jacobian,
trajectory planning, statics and gripping, and dynamics and control.
Robert L. Norton, Kinematics and Dynamics of Machinery, McGraw Hill, Latest edition.
ا ﺘﻢ
ﻭﺍﻟﺴﺮﻋﺔ ﻭﺍﻟﺘﺴﺎﺭﻉ ﻵﻟﻴﺔ ﻣﻜﻮﻧﺔ ﻣﻦ ﻭﺻﻼﺕ ﻣﺴﺘﻮﻳﺔ ﺑﺎﺳﺘﺨﺪﺍﻡ، ﺗﺤﻠﻴﻞ ﺍﻟﻤﻮﺿﻊ، ﻣﻘﺪﻣﺔ ؛ ﺣﺮﻛﺔ ﺍﻵﻟﻴﺎﺕ
ﺗﺤﻠﻴﻞ ﺍﻟﺤﺮﻛﺔ ﻭﺍﻟﻘﻮﻯ ﻓﻲ ﺍﻵﻟﻴﺎﺕ ﺑﺎﺳﺘﺨﺪﺍﻡ ﻁﺮﻳﻘﺔ. ﺗﺤﻠﻴﻞ ﺗﺮﻛﻴﺒﺎﺕ ﺍﻟﻮﺻﻼﺕ. ﻣﻌﺎﺩﻟﺔ ﺍﻟﺪﻭﺭﺓ ﺍﻟﻤﺘﺠﻬﺔ
. ﻣﺸﺮﻭﻉ ﻓﺼﻠﻲ، ﺍﻟﺘﺤﻮﻳﻼﺕ ﺍﻟﻤﺘﺠﺎﻧﺴﺔ ﻭﻁﺮﻳﻘﺔ ﺍﻟﻤﺼﻔﻮﻓﺔ
Topics include: synthesis of planar mechanisms using graphical and analytical methods;
kinematic and kinetic analysis of planar and spatial mechanisms using computer-aided matrix
solution methods; and analytical design of high speed cams. Engineering tools include
general-purpose mathematical software and motion simulation software. Assigned are mini-
projects based on studied kinematic and kinetic principles combined with analytical
formulation and computer-assisted methods for designing mechanisms.
ا ﺘﻢ
*
Course Code and Number: ME 469 * ﻫﻤﻚ469 :ﺍﻟﺮﻗﻢ ﻭﺍﻟﺮﻣﺰ
ﺩﻳﻨﺎﻣﻴﻜﺎ. ﺍﻟﻔﺮﺍﻣﻞ ﻭﺧﻂ ﺍﻟﺴﻮﺍﻗﺔ، ﻣﻌﺪﺍﺕ ﺍﻟﻘﻴﺎﺩﺓ، ﻣﻨﻈﻮﻣﺎﺕ ﺍﻟﺘﻌﻠﻴﻖ، ﻫﻴﺎﻛﻞ ﺍﻟﻌﺮﺑﺎﺕ، ﺗﻨﺎﻭﻝ ﻣﻨﻬﺠﻲ ﻟﺘﺼﻤﻴﻢ ﺍﻟﻌﺮﺑﺎﺕ
.. ﻣﺸﺮﻭﻉ ﺗﺼﻤﻴﻢ ﻓﻌﻠﻲ، ﺍﻟﻌﺮﺑﺎﺕ ﺍﻷﺳﺎﺳﻴﺔ ﻓﻲ ﺣﺎﻝ ﺍﻟﺮﻛﻮﺏ ﻭﻭﺿﻌﻴﺔ ﺍﻻﺳﺘﻌﻤﺎﻝ
Systems approach to automotive design. Automotive structures, suspension systems, steering,
brakes, and driveline. Basic vehicle dynamics in the ride and handling modes. Team-based
design project.
John B. Heywood, Internal Combustion Engines Fundamentals, McGraw Hill, Latest edition.
ا ﺘﻢ
*
Course Code and Number: ME 472 * ﻫﻤﻚ472 :ﺍﻟﺮﻗﻢ ﻭﺍﻟﺮﻣﺰ
ﺩﻭﺭﺍﺕ، ﺃﻧﻮﺍﻉ ﺍﻟﺘﺮﺑﻴﻨﺎﺕ ﺍﻟﺒﺨﺎﺭﻳﺔ ﻭﺍﻟﺘﺤﻜﻢ ﻓﻴﻬﺎ ؛ ﺍﻟﻤﻮﻟﺪﺍﺕ ﺍﻟﺒﺨﺎﺭﻳﺔ، ﺃﺑﺮﺍﺝ ﺍﻟﺘﺒﺮﻳﺪ،ﺩﻭﺭﺍﺕ ﺍﻟﻘﻮﻯ ﺍﻟﺒﺨﺎﺭﻳﺔ ؛ ﺍﻟﻤﻜﺜﻔﺎﺕ
.ﺍﻟﺘﺮﺑﻴﻨﺎﺕ ﺍﻟﻐﺎﺯﻳﺔ ﺍﻟﺒﺴﻴﻄﺔ؛ ﻣﺤﻄﺎﺕ ﺍﻟﻘﻮﻯ ﺫﺍﺕ ﺍﻟﺪﻭﺭﺓ ﺍﻟﻤﻮﻟﻔﺔ ؛ ﺍﻟﺘﻮﻟﻴﺪ ﺍﻟﻤﺘﺮﺍﻓﻖ ﻟﻠﻘﺪﺭﺓ ﻭﺍﻟﺤﺮﺍﺭﺓ ؛ ﺗﺤﻠﻴﻞ ﻣﻨﺤﻨﻰ ﺍﻷﺣﻤﺎﻝ
Introduction, Steam cycle, Reheat and Regeneration, Condensers, Cooling Towers, Steam
generators, Simple Gas turbine cycles, Combined cycles and Cogeneration cycles, Power
Plant Load Curves, Power and desalination plants, environmental impacts related to power
plants.
ا ﺘﻢ
*
Course Code and Number: * ME 473 ﻫﻤﻚ473 :ﺍﻟﺮﻗﻢ ﻭﺍﻟﺮﻣﺰ
Course Level: 9 or 10 “Elective Course” " "ﻣﻘﺮﺭ ﺇﺧﺘﻴﺎﺭﻯ10 ﺍﻭ9 :ﻣﺴﺘﻮﻯ ﺍﻟﻤﻘﺮﺭ
ﺗﻄﺒﻴﻘ ﺎﺕ ﻷﺟﻬ ﺰﺓ: ﻭﺻ ﻒ ﻟﻶﻟﻴ ﺎﺕ ﺍﻟﺘ ﻲ ﻳﺘﺤ ﻮﻝ ﺑﻤﻮﺟﺒﻬ ﺎ ﺍﻟﻮﻗ ﻮﺩ ﻭﺍﻟﻤﺆﻛﺴ ﺪﺍﺕ ﺇﻟ ﻰ ﻣﻨﺘﺠ ﺎﺕ ﺍﺣﺘ ﺮﺍﻕ
ﻭﺍﻟ ﺪﻳﺰﻝ ﻭﺗﺮﺑﻴﻨ ﺔ ﺍﻟﻐ ﺎﺯ ﻭﻣﻨﻈﻮﻣ ﺎﺕ ﺍﻻﺣﺘ ﺮﺍﻕ ﻓ ﻲ ﻣﺤﻄ ﺎﺕ ﺗﻮﻟﻴ ﺪ، " " ﺃﺗ ﻮ: ﺍﺣﺘ ﺮﺍﻕ ﻋﻤﻠﻴ ﺔ ﻣﺜ ﻞ
. ﺍﻟﻄﺎﻗﺔ ﻭﺇﻋﺘﺒﺎﺭﺍﺕ ﺗﻠﻮﺙ ﺍﻟﻬﻮﺍء ﺍﻟﻨﺎﺟﻢ ﻋﻦ ﺍﻻﺣﺘﺮﺍﻕ ﻭﻛﻔﺎءﺓ ﺍﻻﺣﺘﺮﺍﻕ
Description of the mechanisms by which fuel and oxidizers are converted into combustion
products. Applications to practical combustion devices such as Otto, Diesel, gas turbine, and
power plant combustion systems. Consideration of combustion generated air pollution and
combustion efficiency.
B.K. Hodge and R.P. Taylor, Analysis and Design of Energy Systems, Prentice Hall.
ﺍﻟﺨﺘﻢ
*
Course Code and Number: * ME 474 ﻫﻤﻚ474 :ﺍﻟﺮﻗﻢ ﻭﺍﻟﺮﻣﺰ
Course Level: 9 or 10 “Elective Course” " "ﻣﻘﺮﺭ ﺇﺧﺘﻴﺎﺭﻯ10 ﺍﻭ9 :ﻣﺴﺘﻮﻯ ﺍﻟﻤﻘﺮﺭ
ﺑﻮﺍﺳ ﻄﺔ ﺩﻭﺭﺍﺕ ﺍﻟﻬ ﻮﺍء ﺍﻟﻘﻴﺎﺳ ﻴﺔ ؛ ﺗﺤﻠﻴ ﻞ ﺩﻭﺭﺓ ﺍﻟﻮﻗ ﻮﺩ ﻭﺍﻟﻬ ﻮﺍء ؛ ﺩﻭﺭﺍﺕ ﺍﻟﻤﺤﺮﻛ ﺎﺕ ﺍﻟﻔﻌﻠﻴ ﺔ ؛
ﺍﻻﺣﺘﻜ ﺎﻙ ﻓ ﻲ ﺍﻟﻤﺤ ﺮﻙ ؛ ﻅ ﺎﻫﺮﺓ ﺍﻟﺼ ﻔﻊ ؛ ﺍﻟﻜﺮﺑ ﻮﺭﻳﺘﺮﺍﺕ ؛ ﺍﻷﺩﺍء ﻓ ﻲ ﺍﻟﻘ ﺪﺭﺓ ﻋﻠ ﻰ ﺳ ﺤﺐ ﺍﻟﻬ ﻮﺍء ؛
ﺍﻟﺸ ﺤﻦ ﻓ ﻲ ﺍﻟﻤﺤﺮﻛ ﺎﺕ ؛ ﺍﺧﺘﺒ ﺎﺭﺍﺕ ﺍﻷﺩﺍء ﻓ ﻲ ﻣﺤﺮﻛ ﺎﺕ ﺍﻹﺷ ﻌﺎﻝ ﺑﺎﻟﺸ ﺮﺍﺭﺓ ﻭﻣﺤﺮﻛ ﺎﺕ ﺍﻹﺷ ﻌﺎﻝ
. ﺑﺎﻷﻧﻀﻐﺎﻁ
Air standard cycle approximation; Fuel air cycle analysis; Actual engine cycles; Engine
friction; Detonation; Air capacity performance and supercharging; Performance tests for SI
and CI engines.
ﺍﻟﺨﺘﻢ
*
Course Code and Number: * ME 475 ﻫﻤﻚ475 :ﺍﻟﺮﻗﻢ ﻭﺍﻟﺮﻣﺰ
Course Level: 9 or 10 “Elective Course” " "ﻣﻘﺮﺭ ﺇﺧﺘﻴﺎﺭﻯ10 ﺍﻭ9 :ﻣﺴﺘﻮﻯ ﺍﻟﻤﻘﺮﺭ
ﻛﻔ ﺎءﺓ ﺍﻟﻄﺎﻗ ﺔ ﻣ ﺎﺩﺓ ﺷ ﺎﻣﻠﺔ ﺗﺠﻤ ﻊ ﻣﺨﺘﻠ ﻒ ﺍﻟﺘﺨﺼﺼ ﺎﺕ ﺍﻟﻬﻨﺪﺳ ﻴﺔ ﻟﺘﻘﻠﻴ ﻞ ﺍﺳ ﺘﻬﻼﻙ ﺍﻟﻄﺎﻗ ﺔ ﻓ ﻲ ﻗﻄ ﺎﻉ
، ﺍﻟﻬ ﺪﻑ ﺍﻻﺳﺎﺳ ﻲ ﻣ ﻦ ﺍﻟﻤ ﺎﺩﺓ ﻫ ﻲ ﺗﻌﺮﻳ ﻒ ﺍﻟﻄ ﻼﺏ ﺑﻤ ﺎﺩﻱء ﻛﻔ ﺎءﺓ ﺍﻟﻄﺎﻗ ﺔ. ﺍﻟﻨﻘ ﻞ ﻭﺍﻟﻤﺼ ﺎﻧﻊ،ﺍﻟﻤﺒ ﺎﻧﻲ
ﻋﻼﻗ ﺔ ﺍﻟﻄﺎﻗ ﺔ، ﺍﻗﺘﺼ ﺎﺩ ﺍﻟﻄﺎﻗ ﺔ، ﺳﻴﺎﺳ ﺎﺕ ﺍﻟﻄﺎﻗ ﺔ، ﺍﻻﺳ ﺘﺪﺍﻣﺔ،ﻣﻔ ﺎﻫﻴﻢ ﺍﺳﺎﺳ ﻴﺔ ﻓ ﻲ ﻛﻔ ﺎءﺓ ﺍﻟﻄﺎﻗ ﺔ
.ﻭﺍﻟﺒﻴﺌﺔ
Energy Efficiency is a multi-disciplinary course that introduces energy consumption
reduction measures in buildings, transportation and industrial sectors. The main objective of
the course is to provide engineering and architect students with the basic principles of energy
efficiency, fundamental concepts, sustainability, energy policy, energy finance and energy
and environment.
ﺍﻟﺨﺘﻢ
*
Course Code and Number: * ME 476 ﻫﻤﻚ476 :ﺍﻟﺮﻗﻢ ﻭﺍﻟﺮﻣﺰ
Course Pre-requisite: ME 378 Heat Transfer ﻫﻤﻚ ﺍﻧﺘﻘﺎﻝ ﺍﻟﺤﺮﺍﺭﺓ378 :ﺍﻟﻤﺘﻄﻠﺒﺎﺕ ﺍﻟﺴﺎﺑﻘﺔ
Course Level: 9 or 10 “Elective Course” " "ﻣﻘﺮﺭ ﺇﺧﺘﻴﺎﺭﻯ10 ﺍﻭ9 :ﻣﺴﺘﻮﻯ ﺍﻟﻤﻘﺮﺭ
ﺍﻟﺨﻼﻳﺎ ﺍﻟﺸﻤﺴﻴﺔ، ﺍﻻﻟﻮﺍﺡ ﺍﻟﻤﺴﺘﻮﻳﺔ ؛ ﺍﻟﻤﺮﻛﺰﺍﺕ ﺫﺍﺕ ﺍﻟﺸﻜﻞ ﻣﻘﻄﻊ ﻣﻜﺎﻓﺊ، ﺍﻟﻠﻮﺍﻗﻂ ﺍﻟﺸﻤﺴﻴﺔ، ﺍﻻﺷﻌﺎﻉ ﺍﻟﺸﻤﺴﻲ، ﻣﻘﺪﻣﺔ
. ﺍﻟﺘﺤﻠﻴﺔ ﻭﺍﻟﺘﺒﺮﻳﺪ، ﺗﺴﺨﻴﻦ ﺍﻟﻤﺎء، ﺗﻄﺒﻴﻘﺎﺕ ﺍﻟﻄﺎﻗﺔ ﺍﻟﺸﻤﺴﻴﺔ، ﺍﻟﺘﺤﻠﻴﻞ ﻭﺍﻻﺩﺍء ﺍﻟﺤﺮﺍﺭﻱ ﻟﻠﻮﺍﻗﻂ ﺍﻟﺸﻤﺴﻴﺔ،
Introduction, Solar radiation; Properties of materials, Methods of solar collection, Solar
collectors: Flat plate, Concentrating parabolic, Photovoltaic; Thermal analysis and
performance of solar collectors; Components of solar systems, Solar energy applications:
Water heating, Desalination, Refrigeration, Power generation.
ﺍﻟﺨﺘﻢ
*
Course Code and Number: * ME 477 ﻫﻤﻚ477 :ﺍﻟﺮﻗﻢ ﻭﺍﻟﺮﻣﺰ
Course Pre-requisite: ME 378 Heat Transfer ﻫﻤﻚ ﺍﻧﺘﻘﺎﻝ ﺍﻟﺤﺮﺍﺭﺓ378 :ﺍﻟﻤﺘﻄﻠﺒﺎﺕ ﺍﻟﺴﺎﺑﻘﺔ
Course Level: 9 or 10 “Elective Course” " "ﻣﻘﺮﺭ ﺇﺧﺘﻴﺎﺭﻯ10 ﺍﻭ9 :ﻣﺴﺘﻮﻯ ﺍﻟﻤﻘﺮﺭ
ﺍﻟﻄﺎﻗﺔ، ﺗﺤﻮﻳﻞ ﺍﻟﻄﺎﻗﺔ ﺍﻟﻤﺒﺎﺷﺮﺓ ﻭﺧﻼﻳﺎ ﺍﻟﻮﻗﻮﺩ، ﻣﻨﻈﻮﻣﺎﺕ ﺍﻟﻄﺎﻗﺔ ﺍﻟﻤﺘﺠﺪﺩﺓ، ﺍﻟﺪﻭﺭﺍﺕ ﺍﻟﻤﺮﻛﺒﺔ )ﺍﻟﻤﻮﻟﻔﺔ( ﺍﻟﻌﺎﻟﻴﺔ ﺍﻟﻜﻔﺎءﺓ
. ﺍﻟﺘﺄﺛﻴﺮﺍﺕ ﺍﻟﺒﻴﺌﻴﺔ ﻭﺍﻟﺘﺤﻜﻢ، ﺗﺨﺰﻳﻦ ﺍﻟﻄﺎﻗﺔ، ﺍﻟﻬﻴﺪﺭﻭﺟﻴﻦ ﻛﺤﺎﻣﻞ ﻟﻠﻄﺎﻗﺔ، ﺍﻟﻨﻮﻭﻳﺔ
High efficiency combined cycles; renewable energy systems; direct energy conversion and
fuel cells; nuclear energy; hydrogen as an energy carrier; energy storage; environmental
effects and control.
ﺍﻟﺨﺘﻢ
*
Course Code and Number: * ME 478 ﻫﻤﻚ478 :ﺍﻟﺮﻗﻢ ﻭﺍﻟﺮﻣﺰ
Course Pre-requisite: ME 378 Heat Transfer ﻫﻤﻚ ﺍﻧﺘﻘﺎﻝ ﺍﻟﺤﺮﺍﺭﺓ378 :ﺍﻟﻤﺘﻄﻠﺒﺎﺕ ﺍﻟﺴﺎﺑﻘﺔ
Course Level: 9 or 10 “Elective Course” " "ﻣﻘﺮﺭ ﺇﺧﺘﻴﺎﺭﻯ10 ﺍﻭ9 :ﻣﺴﺘﻮﻯ ﺍﻟﻤﻘﺮﺭ
ﺗﻤﺜﻴﻞ، ﺣﺴﺎﺏ ﻭﺗﻘﻴﻴﻢ ﺃﺩﺍء ﺍﻟﻤﻨﻈﻤﺎﺕ، ﺗﺼﻤﻴﻢ ﺍﻟﻤﺒﺎﺩﻻﺕ ﺍﻟﺤﺮﺍﺭﻳﺔ: ﺍﺳﺘﻌﺮﺍﺽ ﻣﻨﻈﻮﻣﺎﺕ ﺍﻻﻧﺎﺑﻴﺐ ﻭﺍﻟﻤﺤﺮﻛﺎﺕ ﺍﻻﺳﺎﺳﻴﺔ
ﺗﺤﺪﻳﺪ ﻭﺗﻘﻴﻴﻢ ﻓﺮﺹ، ﺍﻟﺘﻘﻴﻴﻢ ﺍﻻﻗﺘﺼﺎﺩﻱ ﺑﻤﺎ ﻓﻲ ﺫﻟﻚ ﻛﻠﻔﺔ ﺭﺃﺱ ﺍﻟﻤﺎﻝ ﻭﺍﻟﺘﺸﻐﻴﻞ، ﺍﻷﻣﺜﻠﻴﺔ ﻓﻲ ﺍﻟﻤﻨﻈﻮﻣﺎﺕ، ﺍﻟﻤﻨﻈﻮﻣﺎﺕ
ﺍﻻﺳﺘﺜﻤﺎﺭ
Review of piping systems and prime movers; design of heat exchangers; evaluation of
system performance; system simulation; system optimization; economic evaluation
including capital and operating cost estimations and evaluation of investment
opportunities.
ﺍﻟﺨﺘﻢ
*
Course Code and Number: * ME 479 ﻫﻤﻚ479 :ﺍﻟﺮﻗﻢ ﻭﺍﻟﺮﻣﺰ
Course Pre-requisite: ME 378 Heat Transfer ﻫﻤﻚ ﺍﻧﺘﻘﺎﻝ ﺍﻟﺤﺮﺍﺭﺓ378 :ﺍﻟﻤﺘﻄﻠﺒﺎﺕ ﺍﻟﺴﺎﺑﻘﺔ
Course Level: 9 or 10 “Elective Course” " "ﻣﻘﺮﺭ ﺇﺧﺘﻴﺎﺭﻯ10 ﺍﻭ9 :ﻣﺴﺘﻮﻯ ﺍﻟﻤﻘﺮﺭ
؛ ﺍﻟﺘﺤﻠﻴﺔ ﻣﺘﻌﺪﺩﺓ ﺍﻟﺘﺄﺛﻴﺮﺍﺕHSF ﺍﻟﻮﻣﻴﺾ ﻣﺘﻌﺪﺩ ﺍﻟﻤﺮﺍﺣﻞ: ﺃﺳﺎﺳﻴﺎﺕ ﺗﺤﻠﻴﺔ ﺍﻟﻤﻴﺎﻩ – ﺍﻟﻄﺮﻕ ﺍﻟﺤﺮﺍﺭﻳﺔ ﻹﺯﺍﻟﺔ ﺍﻟﻤﻠﻮﺣﺔ
ﺍﻟﺘﺤﻠﻴﻞ،؛ ﺍﻟﺘﻨﺎﺿﺢ ﺍﻟﻌﻜﺴﻲ، ﻟﻮﺣﺎﺕ ﺍﻟﺒﺨﺮ ﺍﻟﺸﻤﺴﻴﺔ، ﺯﻳﺎﺩﺓ ﺍﻟﺮﻁﻮﺑﺔ ﻭﺍﻟﺘﺨﻠﺺ ﻣﻨﻬﺎ، ﺿﻐﻂ ﺍﻟﺒﺨﺎﺭ، ﺍﻟﺘﺠﻤﺪ، MED
. ﺍﻟﺘﺤﻠﻴﺔ ﻭﺗﻘﻨﻴﺔ ﺍﻟﻨﺎﻧﻮ، ﺍﻟﺘﺤﻠﻴﺔ ﺑﺎﻟﺒﺨﺮ ﻋﺒﺮ ﺍﻟﻐﺸﺎء،ﺍﻟﻜﻬﺮﺑﻲ
Potable water resources and need for desalination, Fundamentals of desalination, Overview
and classification of desalination techniques, Single and multiple effect evaporation, Vapor
compression, Single and Multi stage flash distillation, Reverse Osmosis, Hybrid processes,
Dual Purpose Power and Desalination plants, Desalination powered by renewable energy
sources, Economic analysis, Brine discharge management.
Fundamentals of salt Water Desalination, H.T. El Dessouky and H.M. Ettouney, Elsevier,
2002.
According to Approved Mechanical
ﻁﺒﻘﺎ ً ﻟﻠﺨﻄﺔ ﺍﻟﻤﻌﺘﻤﺪﺓ ﻟﻘﺴﻢ ﺍﻟﻬﻨﺪﺳﺔ ﺍﻟﻤﻴﻜﺎﻧﻴﻜﻴﺔ ﺍﺑﺘﺪﺍء ﻣﻦ
Engineering Department Plan Starting from
ﻫـ1440/1439 ﺍﻟﻌﺎﻡ ﺍﻟﺠﺎﻣﻌﻲ
Academic Year 2018/2019 G
*The official teaching language at the college of engineering is English.
**(X, Y, L) X = Lectures; Y = Tutorials; L = Lab
ﺍﻟﺨﺘﻢ
*
Course Code and Number: * ME 481 ﻫﻤﻚ481 :ﺍﻟﺮﻗﻢ ﻭﺍﻟﺮﻣﺰ
Course Title: Introduction to
ﻣﻘﺪﻣﺔ ﺩﻳﻨﺎﻣﻴﻜﺎ ﺍﻟﻤﻮﺍﺋﻊ ﺍﻟﺤﺴﺎﺑﻴﺔ:ﺍﺳﻢ ﺍﻟﻤﻘﺮﺭ
Computational Fluid Dynamics
Credit Hours 3(2, 0, 2) ** **
(2،0،2) 3 :ﺍﻟﺴﺎﻋﺎﺕ ﺍﻟﻤﻌﺘﻤﺪﺓ
Course Pre-requisite: ME 384 Fluid
ﻫﻤﻚ ﻣﻴﻜﺎﻧﻴﻜﺎ ﺍﻟﻤﻮﺍﺋﻊ384 :ﺍﻟﻤﺘﻄﻠﺒﺎﺕ ﺍﻟﺴﺎﺑﻘﺔ
Mechanics
Course Co-requisite: - - :ﺍﻟﻤﺘﻄﻠﺒﺎﺕ ﺍﻟﻤﺮﺍﻓﻘﺔ
Course Level: 9 or 10 “Elective Course” " "ﻣﻘﺮﺭ ﺇﺧﺘﻴﺎﺭﻯ10 ﺍﻭ9 :ﻣﺴﺘﻮﻯ ﺍﻟﻤﻘﺮﺭ
ﻧﻤﺬﺟﺔ ﺍﻻﺟﺮﺍءﺍﺕ ﺍﻟﻔﻴﺰﻳﺎﺋﻴﺔ ﻭﻳﺸﺘﻤﻞ ﺫﻟﻚ ﻋﻠﻰ ﺍﻧﺴﻴﺎﺏ، ﻁﺮﻳﻘﺔ ﺍﻻﺟﺴﺎﻡ ﺍﻟﻤﺤﺪﺩﺓ، ﺗﺼﻨﻴﻒ ﺍﻟﻤﻌﺎﺩﻻﺕ ﺍﻟﺘﻔﺎﺿﻠﻴﺔ ﺍﻟﺠﺰﺋﻴﺔ
. ﻛﻮﺩﺍﺕ ﺍﻟﺤﺎﺳﻮﺏ ﺍﻟﻌﺎﻣﺔ، ﺗﻘﻴﻴﻢ ﺍﻻﺳﺘﻘﺮﺍﺭ ﻭﺍﻟﺪﻗﺔ ﻓﻲ ﺍﻟﺤﻠﻮﻝ ﺍﻟﺮﻗﻤﻴﺔ، ﻭﺷﺒﻜﺎﺕ ﺍﻟﺤﺴﺎﺏ، ﻭﺇﻧﺘﻘﺎﻝ ﺍﻟﺤﺮﺍﺭﺓ ﻭﺍﻟﻜﺘﻠﺔ، ﺍﻟﻤﺎﺋﻊ
Classification of partial differential equations; finite volume methods; modeling of physical
processes including fluid flow and heat and mass transfer; computational grids; assessment
of stability and accuracy of numerical solutions, use of general purpose computer codes.
ﺍﻟﺨﺘﻢ
*
Course Code and Number: * ME 482 ﻫﻤﻚ482 :ﺍﻟﺮﻗﻢ ﻭﺍﻟﺮﻣﺰ
Course Level: 9 or 10 “Elective Course” " "ﻣﻘﺮﺭ ﺇﺧﺘﻴﺎﺭﻯ10 ﺍﻭ9 :ﻣﺴﺘﻮﻯ ﺍﻟﻤﻘﺮﺭ
ﺗﻘﻠﻴﻞ ﺍﻟﻤﺴﺄﻟﺔ ﺍﻟﻌﺎﻣﻠﺔ ﺇﻟﻰ ﺍﻧﺴﻴﺎﺏ ﺍﺣﺎﺩﻱ، ﺍﺳﺘﻌﺮﺍﺽ ﻭﺍﺳﺘﻨﺒﺎﻁ ﺍﻟﻤﻌﺎﺩﻻﺕ ﺍﻻﺳﺎﺳﻴﺔ ﻻﻧﺴﻴﺎﺏ ﺍﻟﻤﻮﺍﺋﻊ ﺍﻟﻘﺎﺑﻠﺔ ﻟﻼﻧﻀﻐﺎﻁ
، ﺍﻻﻧﺴﻴﺎﺏ ﺍﻻﺣﺎﺩﻱ ﺍﻟﻤﺤﻮﺭ ﻓﻲ ﻓﻨﻴﺔ ﻣﻊ ﺍﻻﺣﺘﻜﺎﻙ ﻭﺑﺪﻭﻧﻪ ؛ ﺍﻻﻧﺴﻴﺎﺏ ﺍﻻﺣﺎﺩﻱ ﺍﻟﻤﺤﻮﺭ ﻣﻊ ﺇﺿﺎﻓﺔ ﺍﻟﺤﺮﺍﺭﺓ، ﺍﻟﻤﺤﻮﺭ
. ﺍﻟﻤﻮﺟﺎﺕ ﺍﻟﻨﺎﺗﺠﺔ ﻣﻦ ﺍﻟﺼﺪﻣﺔ ﺍﻟﻌﻤﻮﺩﻳﺔ ﻭﺍﻟﻤﺎﺋﻠﺔ
Derivation and review of basic equations of compressible fluid flow; Reduction of the
general problem to 1-D flow; 1-D flow in nozzles with and without friction; 1-D flow with
heat addition; normal shock and oblique shock waves.
ﺍﻟﺨﺘﻢ
*
Course Code and Number: * ME 483 ﻫﻤﻚ483 :ﺍﻟﺮﻗﻢ ﻭﺍﻟﺮﻣﺰ
Course Level: 9 or 10 “Elective Course” " "ﻣﻘﺮﺭ ﺇﺧﺘﻴﺎﺭﻯ10 ﺍﻭ9 :ﻣﺴﺘﻮﻯ ﺍﻟﻤﻘﺮﺭ
ﻣﺤﻞ ﻭﺃﺩﺍء ﻭﺧﻮﺍﺹ، ﺗﻔﺎﺻﻴﻞ ﺍﻟﺒﻨﺎء، ﺍﻻﻧﺴﻴﺎﺏ ﺍﻷﺣﺎﺩﻱ ﺍﻟﻤﺤﻮﺭ ﺍﻷﺳﺎﺳﻲ ﻭﺍﻻﻧﺴﻴﺎﺏ ﺑﺪﻭﻥ ﺍﺣﺘﻜﺎﻙ ﻓﻲ ﻣﺴﺎﺣﺔ ﻣﺘﻐﻴﺮﺓ
ﻭﺍﻟﻀﻮﺍﻏﻂ، ﻭﻓﻨﻴﺎﺕ ﺍﻟﻌﺎﺩﻡ، ﺍﻟﺪﺧﻮﻝ، ﺗﺤﻠﻴﻞ ﺃﺩﺍء. ﻭﺍﻟﺪﻓﻊ ﺍﻟﻨﻔﺎﺙ، ﻭﺍﻟﻤﺮﺍﻭﺡ ﺍﻟﺘﺮﺑﻴﻨﻴﺔ، ﻭﺍﻟﺪﻓﻊ ﺍﻟﻨﻔﺎﺙ، ﺃﺟﻬﺰﺓ ﺍﻟﺪﻓﻊ
ﻭﺍﻟﺴﺮﻋﺔ ﻭﺍﻟﺘﻐﻴﻴﺮ ﻓﻲ ﺩﺭﺟﺔ ﺣﺮﺍﺭﺓ، ﻣﻌﺎﺩﻟﺔ ﺍﻟﺪﻓﻊ ـ ﻭﺍﻟﻌﻮﺍﻣﻞ ﺍﻟﺘﻲ ــــــــ ﺍﻟﺪﻓﻊ ـ ﻭﺗﺄﺛﻴﺮ ﺍﻟﻀﻐﻂ. ﻭﺍﻟﺘﺮﺑﻴﻨﺎﺕ، ﻭﺍﻟﺤﻮﺍﺭﻕ
ﻣﺤﺮﻛﺎﺕ ﺍﻟﺼﻮﺍﺭﻳﺦ ﺫﺍﺕ ﺍﻟﺪﻓﻊ ﺍﻟﺴﺎﺋﻞ، ﺧﺼﺎﺋﺺ ﺃﺩﺍء ﻣﺤﺮﻛﺎﺕ ﺍﻟﺼﻮﺍﺭﻳﺦ. ﺍﻟﻬﻮﺍء ﺍﻟﺪﺍﺧﻞ ﻟﻠﻀﺎﻏﻂ ـ ﻁﺮﻕ ﺯﻳﺎﺩﺓ ﺍﻟﺪﻓﻊ
. ﺍﻟﺼﻮﺍﺭﻳﺦ ﺍﻟﻜﻴﻤﻴﺎﺋﻴﺔ ﺍﻷﺣﺎﺩﻳﺔ ﻭﺍﻟﻤﺘﻌﺪﺩﺓ ﺍﻟﻤﺮﺍﺣﻞ، ﺃﺩﺍء ﻁﻴﺮﺍﻥ ﺍﻟﺼﻮﺍﺭﻳﺦ، ﺃﻭ ﺍﻟﺼﻠﺐ
Basic one-dimensional flow isentropic flow with area change, Construction details, working
and performance characteristics of propellers, ramjets, turbojets, turbofans, turboprop jets.
Performance analysis of inlets, exhaust nozzles, compressors, burners, and turbines. The
thrust equation - Factors affecting thrust - Effect of pressure, velocity and temperature
changes of air entering compressor - Methods of thrust augmentation. Performance
characteristics of rockets engine. Liquid and solid propellant rocket motors. Performance of
rocket flight, Single and multi-stage chemical rockets.
ﺍﻟﺨﺘﻢ
*
Course Code and Number: * ME 485 ﻫﻤﻚ485 :ﺍﻟﺮﻗﻢ ﻭﺍﻟﺮﻣﺰ
Course Level: 9 or 10 “Elective Course” " "ﻣﻘﺮﺭ ﺇﺧﺘﻴﺎﺭﻯ10 ﺍﻭ9 :ﻣﺴﺘﻮﻯ ﺍﻟﻤﻘﺮﺭ
ﻭﻣﻜﻮﻧﺎﺗﻬﺎ ؛ ﺍﻟﻤﻌﺎﺩﻻﺕ ﺍﻷﺳﺎﺳﻴﺔ ﻟﺴﺮﻳﺎﻥ ﺍﻟﻤﻮﺍﺋﻊ ؛ ﻣﻌﺎﺩﻟﺔ ﺃﻭﻳﻠﺮ ﻟﻶﻻﺕ ﺍﻟﺘﺮﺑﻴﻨﻴﺔ ؛ ﺗﻌﺎﺭﻳﻒ ﺍﻟﻜﻔﺎءﺓ ﻟﻶﻻﺕ ﺍﻟﺘﺮﺑﻴﻨﻴﺔ
. ﺃﺑﻌﺎﺩ3 ﺍﻵﻻﺕ ﺍﻟﺘﺮﺑﻴﻨﻴﺔ ﺍﻟﻤﺤﻮﺭﻳﺔ ؛ ﺍﻵﻻﺕ ﺍﻟﺘﺮﺑﻴﻨﻴﺔ ﻧﺼﻒ ﺍﻟﻘﻄﺮﻳﺔ ؛ ﺑﻌﺾ ﺍﻋﺘﺒﺎﺭﺍﺕ ﺍﻟﺴﺮﻳﺎﻥ ﻓﻲ
Measuring concepts; Basic description of fluid machines and their types; Basic equations as
applied to turbo machines; Stage and component efficiency; Performance and analysis of
axial pumps, compressors and turbines; Performance and analysis of radial pumps,
compressors and turbines; Performance and analysis of wind and hydraulic turbines.
Fluid Mechanics and Thermodynamics of Turbomachinery by: Dixon and Hall Sixth
Edition
According to Approved Mechanical
ﻁﺒﻘﺎ ً ﻟﻠﺨﻄﺔ ﺍﻟﻤﻌﺘﻤﺪﺓ ﻟﻘﺴﻢ ﺍﻟﻬﻨﺪﺳﺔ ﺍﻟﻤﻴﻜﺎﻧﻴﻜﻴﺔ ﺍﺑﺘﺪﺍء ﻣﻦ
Engineering Department Plan Starting from
ﻫـ1440/1439 ﺍﻟﻌﺎﻡ ﺍﻟﺠﺎﻣﻌﻲ
Academic Year 2018/2019 G
*The official teaching language at the college of engineering is English.
**(X, Y, L) X = Lectures; Y = Tutorials; L = Lab
ﺍﻟﺨﺘﻢ
*
Course Code and Number: * ME 487 ﻫﻤﻚ487 :ﺍﻟﺮﻗﻢ ﻭﺍﻟﺮﻣﺰ
Course Level: 9 or 10 “Elective Course” " "ﻣﻘﺮﺭ ﺇﺧﺘﻴﺎﺭﻯ10 ﺍﻭ9 :ﻣﺴﺘﻮﻯ ﺍﻟﻤﻘﺮﺭ
ﺗﻄﺒﻴﻘﺎﺕ ﻟﻤﻌﺪﺍﺕ. ﺩﻳﻨﺎﻣﻴﻜﺎ ﺍﻟﺠﺴﻴﻤﺎﺕ – ﻭﺍﻟﻤﻮﺍﺋﻊ. ﺍﻻﺳﺎﺳﻴﺎﺕ ﺍﻟﻜﻴﻤﻴﺎﺋﻴﺔ ﻭﺍﻟﻤﺒﺎﺩﺉ ﺍﻟﻔﻴﺰﻳﺎﺋﻴﺔ ﻟﻠﺘﻮﻟﻴﺪ ﻭﺍﻟﺘﺤﻜﻢ ﺑﻤﻠﻮﺛﺎﺕ ﺍﻟﻬﻮﺍء
ﺗﻜﻮﻥ ﺍﻟﻤﻠﻮﺛﺎﺕ، ﺍﻟﻤﺮﺷﺤﺎﺕ ﺍﻟﻘﻤﺎﺷﻴﺔ، ﺍﻟﻌﻮﺍﺯﻝ ﺍﻟﺘﻲ ﺗﻌﻤﻞ ﺑﻘﻮﺓ ﺍﻟﻄﺮﺩ ﺍﻟﻤﺮﻛﺰﻳﺔ، ﺍﻟﻤﺮﺳﺒﺎﺕ ﺑﺎﻟﺠﺎﺫﺑﻴﺔ: ﺍﻟﺘﺤﻜﻢ ﺑﺎﻟﺘﻠﻮﺙ
. ﻭﺍﻟﺤﺒﻴﺒﺎﺕ ﺃﺛﻨﺎء ﺍﻷﺣﺘﺮﺍﻕ ﻭﺇﻣﺘﺼﺎﺹ ﻭ ﺍﻣﺘﺰﺍﺯ ﻭﺗﺼﻤﻴﻢ ﺍﺑﺮﺍﺝ ﺍﻻﻣﺘﺼﺎﺹ ﻭ ﺍﻻﻣﺘﺰﺍﺯﻭ ﺍﻟﺘﺤﻜﻢ ﺑﺎﻟﺘﻠﻮﺙ
Fundamental chemical and physical principles of generation and control of air pollutants,
Fluid-Particulate Dynamics, Applications to pollution control equipment: Gravity Settlers;
Centrifugal Separators; Fabric Filters; Pollutant and particle formation during combustion;
Gas adsorption and absorption fundamentals and tower/column design, Pollution control
strategies.
Air Pollution Control Equipment Calculations, Louis Theodore, John Wiley & Sons, 2008.
Fundamentals of Air Pollution, DANIEL A. VALLERO, Academic Press, 4th Ed., 2008.
According to Approved Mechanical
ﻁﺒﻘﺎ ً ﻟﻠﺨﻄﺔ ﺍﻟﻤﻌﺘﻤﺪﺓ ﻟﻘﺴﻢ ﺍﻟﻬﻨﺪﺳﺔ ﺍﻟﻤﻴﻜﺎﻧﻴﻜﻴﺔ ﺍﺑﺘﺪﺍء ﻣﻦ
Engineering Department Plan Starting from
ﻫـ1440/1439 ﺍﻟﻌﺎﻡ ﺍﻟﺠﺎﻣﻌﻲ
Academic Year 2018/2019 G
*The official teaching language at the college of engineering is English.
**(X, Y, L) X = Lectures; Y = Tutorials; L = Lab
ﺍﻟﺨﺘﻢ
*
Course Code and Number: * ME 496 ﻫﻤﻚ496 :ﺍﻟﺮﻗﻢ ﻭﺍﻟﺮﻣﺰ
ﺍﻟﺨﺘﻢ
*
Course Code and Number: * ME 497 ﻫﻤﻚ497 :ﺍﻟﺮﻗﻢ ﻭﺍﻟﺮﻣﺰ
ﻭﺇﻛﻤﺎﻝ ﻭﺗﺴﻠﻴﻢ، ﺃﻭ ﻣﻠﺼﻖ ﺗﻮﺿﻴﺢ، ﺍﻛﻤﺎﻝ ﻧﻤﻮﺫﺝ ﻟﻠﺘﺼﻤﻴﻢ ﻭﺍﻟﺘﻘﺪﻳﻢ ﺍﻟﺸﻔﻬﻲ. ﺇﻛﻤﺎﻝ ﻣﺸﺮﻭﻉ ﺍﻟﺘﺨﺮﺝ ﻓﻲ ﺍﻟﺠﺰء ﺍﻷﻭﻝ
ﺗﻘﺮﻳﺮ ﻧﻬﺎﺋﻲ ﻣﻜﺘﻮﺏ ﻋﻦ ﺍﻟﻤﺸﺮﻭﻉ ﻛﻤﺘﻄﻠﺐ ﺃﺳﺎﺳﻲ ﻹﻧﻬﺎء ﺍﻟﻤﻘﺮﺭ
Continuation of the design project stared in ME 496. Completion of the team designed
functional working model, oral presentation and submission of final written report of the
design project are essential requirements for the completion of the course.
ﺍﻟﺨﺘﻢ