Professional Documents
Culture Documents
Colliers 1
International PRE-CHECK LIST
Project Code RISING MAIN
AC Project Management Consultancy INSTALLATION REPORT 7
1 2 3 4 5 6 7 8
REFERENCE
TOLERANCE LIMIT CHECKED & APPROVED
S# VALUE REMARKS
CONT PMC CLIENT
Check Electrical Shaft size as per drawing.
1
Wet riser and sprinkler should not be in the
2 same shaft.
INSTRUCTION TO FILL:
Column # 3 = Any reference value to be recorded
Column # 4,5,6 = initials
dd/mm/yy
Column # 7 = Any Dicrepancy/ Issues Recorded
CHECKLIST #
______S/AC/1/7______
1 2 3 4 5 6 7 8
REFERENCE
TOLERANCE LIMIT CHECKED & APPROVED
S# VALUE REMARKS
CONT PMC CLIENT
Client's Competent Personnel should take
training on the method of installation of the
1 bus duct / Rising main / lighting Trunking from
Godrej before start of installation.
INSTRUCTION TO FILL:
Column # 3 = Any reference value to be recorded
Column # 4,5,6 = initials
dd/mm/yy
Column # 7 = Any Dicrepancy/ Issues Recorded
CHECKLIST #
______S/AC/1/7______
Make:‐
Serial Number:‐
1 2 3 4 5 6 7 8
REFERENCE
TOLERANCE LIMIT CHECKED & APPROVED
S# VALUE REMARKS
CONT PMC CLIENT
R Phase ‐ Neutral
Y Phase ‐ Neutral
2
B Phase ‐ Neutral
R Phase ‐ Earth
Y Phase ‐ Earth
B Phase ‐ Earth
6
Neutral ‐ Earth
7
R Phase ‐ Y Phase
8
R Phase ‐ B Phase
9
B Phase ‐ Y Phase
10
INSTRUCTION TO FILL:
Column # 3 = Any reference value to be recorded
Column # 4,5,6 = initials
dd/mm/yy
Column # 7 = Any Dicrepancy/ Issues Recorded
CHECKLIST #
______S/AC/1/7______
Our Knowledge is your property