Professional Documents
Culture Documents
Easy handling
++ New disk adapter fits a variety of milling
machines
++ Compatible with many veneering systems
++ Conventional cementation can be used
++ Designed for open systems
Premium esthetics
even in monolithic
restorations
++ Extra high translucency (approx. 49%) and
unparalleled shade accuracy allows life-like
esthetics especially for the anterior region
3
Cercon® xt – extra translucent zirconia:
Demonstrates extra high translucency
and unparalleled shade accuracy with
life-like esthetics especially for the
anterior region (flexural strength:
750 MPa) and augments the Cercon
product portfolio.
4
Comparison
Cercon® xt Cercon® ht
CTE (Coefficient of
10.1 µm/m·K (25 – 500 °C) 10.5 µm/m·K (25 – 500 °C)
Thermal Expansion)
Indication Indications in the anterior and posterior Indications in the anterior and posterior
segments Cercon® xt: segments Cercon® ht:
Cercon® xt is indicated for all ceramic Cercon® ht is indicated in the anterior and
restorations for anterior and posterior posterior segments for:
locations: • Crowns
• Crowns • Telescopic primary crowns
• 3-unit bridges • Multi-unit bridges (with no more than
two pontics between abutment crowns;
with no more than 6 units*)
• Two piece abutments**
Cercon® ht can be used as a substructure
(framework) which is then veneered with a
dental veneering ceramic or can be used for
full-contour application (without veneering) as
well. In the case of telescopic primary crowns,
the substructure is not veneered.
Staining concept 6 to 16 6 to 16
5
Cercon®
True Color
Technology:
L*a*b* COLOR SPACE
The new zirconia With all perceptible colors
standard for
color accuracy L
+b
-a +a
-b
++ That we obtain the best possible shade Cercon xt and Cercon ht (green dot) and the shade
reference (centre of the diagram). Shade deviations at
results has been confirmed for us by a level of < 2 are imperceptible to the human eye.
customers in Europe and the USA
6
Testimonials from
the test
Cercon xt
120
100
In addition to our use of analytical
80
shade measurements, customers
60 from Europe and the USA visually
40 compared Cercon xt und Cercon ht
in the 16 classic VITA shades with
20
two leading competitors’ materials
0 on an ongoing basis.
A1 A2 A3 A3.5 A4 B1 B2 B3 B4 C1 C2 C3 C4 D2 D3 D4 The color accuracy of Cercon xt
Classical VITA Shades
and Cercon ht has been evaluated
Cercon xt Material 1 Material 2 as No. 1 in total of 16 classic VITA
shades.
Cercon ht
140
Rating
120
100
80
60
40
Evaluation of the color accuracy of Cercon xt
20
and Cercon ht based on the 16 classic VITA
shades by participants from Europe and the
0 USA in blind testing.
A1 A2 A3 A3.5 A4 B1 B2 B3 B4 C1 C2 C3 C4 D2 D3 D4
Classical VITA Shades
7
Cercon® xt, Cercon® ht
5 Performance
levels:
Full flexibility 1 Monolithic glazed-only
restorations
2
Monolithic restorations
different performance levels.
characterized by staining
The pressure on laboratories is high
– more valuable esthetic results.
to reflect these differences in
economic terms. Cercon xt and
Cercon ht with True Color Technology
offer full flexibility.
5 Full veneering
– ultimate customization
options.
8
5 performance levels
with Cercon xt and Cercon ht
Glazed only
xt
5 min. / customization
fast customized
ht
Customized and
xt
glazed
10 min. / customization
ht fast customized
xt Cut-back
technology
ht 30 min. / customization
fast customized
xt
Combining multiple
techniques
ht
fast customized
Unlimited
customization
ht
fast customized
Time
saving and B4 C1
efficiency: B3 C2
The sleek B2 C3
color B1 C4
Cercon xt/
scheme Cercon ht
A4 D2
6 to 16
A3.5 D3
A3 D4
A2 White
A1
6 to 16
10
6 to 16 with Dentsply Sirona
Universal Stain & Glaze
Staining tech- Just 6 Cercon xt or Cercon ht disks in shades A1, A3, B1, B3, C1, D2 plus the Dentsply Sirona
Universal Stain & Glaze reproduce the 16 classic VITA shades using the staining technique.
nique This is another, extended option for using the system for the fabrication of economical
monolithic restorations in the lab.
B2 B1 Body2 i1
Zirconia for
open systems
Cercon ht
disk-adapter
PRE-SINTERING
The material is pre-sintered in a
temperature-controlled process. This
serves to control the strength of the It´s great to have a choice which delivers a high
material, which is ideally suited for esthetic solution for the anterior region out of
milling in dental milling units. zirconia. Especially if you don´t have enough
High edge stability and a high-quality space for Lithium silicate. With Cercon xt you
surface finish are the results of this have a higher bending strength and almost the
systematic adaptation. same translucency as with Lithium silicate.
The results from Cercon xt are really impressive.
”
Kersten Wegner, Dentist
Dentapont
Aachen | Germany
12
Compatible with all leading open
CAD/CAM systems
I already achieved great results with Cercon ht using Cercon ht with True Color Technology convinced
different performance levels. Starting with monolithic me to change my production process from dipping
restorations using only the staining technique, the into using pre-shaded disks in my mill. The results
esthetics from Cercon xt is really amazing. It´s hard are consistent and reproducible. I was able to
to differentiate Cercon xt from a Lithium silicate increase my capacity which means I can satisfy more
crown. And it´s hard to believe that these results are customers at the same time. I am excited to now have
achieved out of zirconia in this easy and fast way. Cercon xt with True Color Technology.
”
Thomas Bartsch, Master DT
TRIODONT Zahntechnik GmbH
”
Frankie Acosta, Dental Technician
AA Dental Design
Eschweiler | Germany Murrieta | US | CA
13
Cercon®
Technical
information
Framework
Zirconium oxide (Y-TZP)
material
14
Technical specifications Cercon® ht Technical specifications Cercon® xt
• Type II, class 5 (pursuant to DIN EN ISO 6872:2015) • Type II, class 4 (pursuant to DIN EN ISO 6872:2015)
• CTE: 10.5 μm/m·K (25–500 °C) • CTE: 10.1 μm/m·K (25–500 °C)
• Modulus of elasticity: 210 GPa • Modulus of elasticity: 210 GPa
• Flexural strength: approx. 1 200 MPa • Flexural Strength: approx. 750 MPa (three-point flexural
(three-point flexural testing) testing)
Composition (in % by mass) Cercon® ht: Composition (in % by mass) Cercon® xt:
• Zirconium oxide • Zirconium oxide
• Yttrium oxide 5 % • Yttrium oxide 9 %
• Hafnium oxide < 3 % • Hafnium oxide < 3 %
• Aluminium oxide, Silicon oxide < 1 % • Aluminium oxide, Silicon oxide < 1 %
Indications in the anterior and posterior segments Indications in the anterior and posterior segments
Cercon® ht: Cercon® xt:
Cercon® ht is indicated in the anterior and posterior Cercon® xt is indicated for all ceramic restorations for
segments for: anterior and posterior locations:
• Crowns • Crowns
• Telescopic primary crowns • 3-unit bridges
• Multi-unit bridges (with no more than two pontics
between abutment crowns; with no more than 6 units*)
• Two piece abutments**
Contraindications: • After use, wash your hands and apply a hand cream.
• This medical product may not be used in patient • Do not smoke, eat or drink while handling the product.
hypersensitivity to zirconia (Y-TZP) or one of the other • Do not swallow the product.
ingredients • Do not inhale dust particles during grinding.
• Bruxism or recalcitrant parafunctional habits (for • Use local vacuum suction and suitable mouth/face
ceramically veneered frameworks) protection during manual machining at the workplace.
• Insufficient available space
The safety and warning notes listed here describe how to
• Endodontic posts
use our medical product in a safe and risk-free manner.
• Endosseous implants
Notify the dentist in charge of all factors described above if
• Inlay bridges
you use this medical product for a custom design and make
• 3-unit bridges in the molar region (for Cercon® xt only)
sure to comply with the pertinent Material Safety Data
Sheets (MSDS).
Warnings:
Possible cross-reactions or interactions of this medical
Adverse effects:
product with other medical products or material already
If properly processed and used, adverse effects of this
present in the oral environment must be taken into
medical product are highly unlikely. However, reactions
consideration by the dentist when selecting this medical
of the immune system (such as allergies) to substances
product.
contained in the material or localized paraesthesia (such as
taste disturbances or irritation of the oral mucosa) cannot
Precautions:
be completely ruled out as a matter of principle. Should
Please note:
you hear or be informed of any adverse effects – even when
• Keep product dust away from eyes.
doubtful – we would like to request notification.
• Avoid any contact with mucosa.
15
US REP
28376/REV 2017-02