Professional Documents
Culture Documents
1. Inspection Criteria.
1.1 All molding flash will be sanded off, on gate area only. This will allow blade
to seat against clamp and not against mold flash.
1.2 Powder coated part must weight: 5.45 lbs. 0.13 lbs. Weights not within
5.32 lbs. and 5.58 lbs. are considered rejects.
1.4 Radius
1.4.1 As cast, R = 3.133” – 3.141”
1.4.2 Coated part, R = 3.129” – 3.139” (3.134” +/- 0.005)
1.5 HPC 5109 Go-No-Go Gauge: both uncoated and coated parts must freely engage the
5109 gauge with no interference
2. Painting Criteria.
2.1 Parts must be thoroughly cleaned before chromate process and painting.
2.3 Apply 2-4 mils DFT of O’Brien Epoxy Powder Coating Pac Black,
EFB-408-S3 to cover part completely.
2.4.4 Inspect - a minimum of 1 piece per each 1000 painted for adhesion.
3. Shipping Preparations.
REVISION 0 1 2
DATE 6-6-00 8-13-04 7/10/08
INITIALS AB CY LRS
Fan Engineering Standards
3.1 Place clamps individually in heavy kraft paper bags before bulk packing in
suitable container.
3.2 Shipping and packing must insure no paint damage upon arrival at
plant.
REVISION 0 1 2
DATE 6-6-00 8-13-04 7/10/08
INITIALS AB CY LRS