Professional Documents
Culture Documents
Introduction
1.10 Per-unit Quantities
1.11 Changing the base of per-unit quantities 1
1 1.13 Single line diagram
1.14 Impedance and reactance diagram
2.4 P.U. impedance in a 1- transformer circuit
2.8 P.U. impedance of three winding transformer
2.10 Advantages of P.U. computation
CLASS TEST - I
10.1 Transients in RL series circuit,
3,4 10.2 Internal voltages of loaded machines under fault
10.3 conditions
10.4 Fault calculation using z bus
Fault calculation using z bus equivalent circuits 1
CLASS TEST - II
9.1 The power flow problem 1
9.2 The Newton-Raphson method & solution
5 9.3, 9.4 Power flow control : TAP changing and regulating
2.9 transformers
3.4 Real and reactive power control 1
9.6 Regulating transformers
11.1 Synthesis of unsymmetrical phasors form their
6 Symmetrical components 1
11.2 Symmetrical components of unsymmetrical phasors
CLASS TEST - III
7 11.4 Power in terms of symmetrical components 1
11.7 Sequence circuit of synchronous machine
8 11.8 Sequence circuit of Y- transformer
11.9 Unsymmetrical series impedance
11.10 Sequence network
9,10 12 Single line to ground fault 1
12.3 Line to line fault
12.4 Double line to ground fault 1
CLASS TEST - IV
30.1 Defining energy requirement
30.2 Maximum demand
12 30.3 Variaiton in demand
30.5 Curve analysis 2
30.6 Load factor
30.7 Utilization factor