Professional Documents
Culture Documents
General information
■ Super Timers 03
● MS4S/Multimode and compact body
The MS4S is a timer with four operation modes. The
on-delay, flicker, one-shot or signal off-delay operation
modes can be selected.
See page 03/52 for further information.
KKD05-126
● ST7P/Miniature size
The ST7P is a highly efficient miniaturized on-delay
timer.
The maximum timing interval is 12 hours.
See page 03/60 for further information.
KKD05-145
M S 4 S M-AP 1T
➀ ➁ ➂ ➃ ➄➅ ➆➇
M S 7 P 2-AP 1T
➀ ➁ ➂ ➃ ➄ ➅➆ ➇➈
■ Types
Description Operation Contact arrangement Timer body Required socket type
Surface mounting Flush mounting Rail mounting
Timed Instant. Type Type Type Type
Super Timer Multi-mode 2PDT – MS4SM TP411X TP411SBA+TX4 TP411X
Multi-range, • On-delay 11GB (Adaptor)
compact body • Flicker + ATX2NS+TX4
• One-shot FX3 (Adaptor)
• Signal off-delay (Hold-down spring)
On-delay 2PDT – MS4SA TP48X TP48SB+TX4 TP48X
SPDT SPDT MS4SC 8GB (Adaptor) 03
+ ATX1NS+TX4
FX3 (Adaptor)
Off-delay 2PDT – MS4SF (Hold-down spring)
SPDT MS4SF-R
Star-delta 2NO 1NO MS4SY
On-off 2PDT – MS4SR
repetitive
operation
Super Timer On-delay 2PDT – ST7P-2 TP88 – TP88X2
Miniature TP88R2 TP88X1
size TP88B
■ Features
• Time-scale indication window and • Instantaneous operation function
with 0 indication
time-scale selector Operation mode
By turning a time-scale selector, the When the timer dial is set at 0, selector
timing-scales appear in the indica- output is given instantaneously, Operation mode
allowing sequence checks to be indication window
tion windows one set a time.
Although this is a multimode timer, performed easily.
Power ON
the optional times such as 56 or 27 indication (Green)
• Time unit indication window and
minutes can be easily set with the
direct-reading time-scale. time unit selector
By turning the time selector, time Output indication
(Red)
units of 0.1 sec., sec., min, and
• Compact timer with instantaneous
contact hours. can be selected and made Time unit
On-delay timers with instantaneous to appear in the indication window. indication
window
contact, as well as multimode and
on-delay timers, are compact. • Improvement of resistance to Time unit
The front to back length of the waveform distortion selector
KKD05-189
The resistance to distortion of
timers is only 66.5mm. Timing range
secondary voltage waveform of the selector
• Operation mode indication window power supply caused by inverters
and uninterruptible power supplies • UL, and TÜV approved
and operation mode selector
Four operation modes are provided (UPS) is improved.
(MS4SM type only).
■ Timing range/16 ranges
By turning the operation mode
selector, the on-delay, flicker, one- Time-scale Time unit indication window
shot, or signal off-delay operation
0.1s sec min hrs
mode can be selected. The present
mode is shown in the operation 0123456 0.05 – 0.6s 0.05 – 6s 0.5 – 6min 0.5 – 6h
mode indication window with the
marks PO, FL, OS or SF. 0 2 4 6 8 10 12 0.1 – 1.2s 1 – 12s 1 – 12min 1 – 12h
0 5 10 15 20 25 30 0.25 – 3s 2.5 – 30s 2.5 – 30min 2.5 – 30h
0 10 20 30 40 50 60 0.5 – 6s 5 – 60s 5 – 60min 5 – 60h
■ Standards
UL file No.: E44592
TÜV License No.: R50007315 (MS4SM)
R50006667 (MS4SA, MS4SC)
Power
T T T
Power 2-10
2. Flicker FL
T-a
T T T T
Power 2-10
• Turn the mode selector until FL is displayed.
Start signal 2-6
• When power is on, applying the start signal turns the
Reset signal 2-7
timed contact on and off repeatedly at the set time
Timed NC 1-4
11-8
Timed NO 1-3
intervals.
11-9
Indicator POWER
Indicator OUTPUT
3. One-shot OS
T-a T-a
Power 2-10
T T
• Turn the mode selector until OS is displayed.
• When power is on, applying the start signal instantly
Start signal 2-6
turns the timed NO contact on and turns it off after the set
Reset signal 2-7
time has elapsed.
Timed NC 1-4
11-8
Timed NO 1-3
11-9
Indicator POWER
Indicator OUTPUT
4. Signal off-delay SF
T-a T-a T-a
T • Turn the mode selector until SF is displayed.
Power 2-10
• When power is on, applying the start signal instantly
Start signal 2-6
turns the timed NO contact on. Removing the start signal
Reset signal 2-7
turns the contact off after the set time has elapsed.
Timed NC 1-4
11-8
Timed NO 1-3
11-9
Indicator POWER
Indicator OUTPUT
MS4SA
● On-delay
NC NC
4 5
Power 2.7 NO NO • When power is applied, the timed NO contacts make after
3 6
1-3 T
Timed NO 8.6 the set time has elapsed.
1-4 (–) 2 7 (+) • When power is removed, the contacts reset.
Timed NC 8.5
COM COM
1 8
Power
MS4SC
●On-delay
Power 2-7 NC NC
4 5 • Timed contact
T
NO NO
Timed NO 8-6 3 6 When power is applied, the NO contact makes after the
Timed NC 8-5
set time has elapsed. When power is removed, the
(–) 2 7 (+) contacts reset.
Inst. NO 1-3 COM COM • Instantaneous contact
1 8
Inst. NC 1-4
When power is applied, the NO contact makes instantly.
Power
When power is removed, the contacts reset.
Notes: • T=Set time. T-a=Time period within the set time
• The gate signal is used to interrupt the elapsing of timing operation.
■ Technical data
Type MS4SF MS4SF-R MS4SY
Repeat accuracy ±0.3% at max. setting time
Reset time – 0.5s or less
Operating voltage range 0.85 to 1.1 times rated input voltage
Operating temperature range -10 to +55°C(No icing)
Humidity 35 to 85% RH (No condensation)
Contact ratings 3A at 250V AC resistive load 5A at 250V AC resistive load
Power consumption Approx. 1VA at AC, Approx. 1W at DC
Insulation resistance 100MΩ at 500V DC megger
Dielectric strength 2000V AC 1min. between current carrying part and non-current currying part
2000V AC 1min. between output contact and control circuit
1000V AC 1min. between open contacts
Vibration Malfunction durability: 10 to 55Hz, 0.5mm double amplitude
Mechanical durability: 10 to 55Hz, 0.75mm double amplitude
Shock Malfunction durability: 100m/s2
Mechanical durability: 500m/s2
Durability Mechanical 10 million operations 20 million
operations
Electrical 100000 operations at 250V AC 3A res. load 80000 operations at 250V AC 5A res. load
Mass Approx. 100g
■ Standards
UL file No. : E44592
NC NC NC
4 5 4 5 4 5
NO NO NO NO
3 6 3 6 3 6
Instantaneous
7 (+) reset signal
(–) 2 2 7 (+) 2 7
(–)
COM COM COM COM COM
1 8 1 8 1 8
Input Input Input
Note: Do not use terminal ➂ of the MS4SF-R as a relay terminal because it is connected to terminals ➀ and ➁ in the timer.
● MS4SF type
Operation Operation pattern Remarks
Off-delay T • When power is on, timed NO contact on.
(Timed 2PDT
• When power is off, timed NO contact off after
contacts) Power (2-7)
the set time has elapsed.
(1-3)
Timed INO
(8-6)
(1-4)
Timed INC
(8-5)
T=set time
● MS4SF-R type
Operation Operation pattern Remarks
Off-delay T T-a
• When power is on, timed NO contact on.
(Timed SPDT contact) Power (2-7) • When power is off, timed NO contact off after the set time
Instantaneous (1-4)
has elapsed.
reset signal
• When the instantaneous reset signal is on, timed NO
Timed NO (8-6)
contact immediately off.
Timed NC (8-5)
● MS4SY type
Operation Operation pattern Remarks
Y
-∆ T1 T2 • Timed contact
(with instantaneous Y
Power (2-7) Timed contact on when the power is on, and off after a set
contact 1NO)
time. Timed contact ∆ on after a changeover time has
Timed contact (8-5)
elapsed and opens when the power turns off.
Timed contact∆ (8-6) • Instantaneous contact
Instantaneous (1-3) When the power is turned on, instantaneous NO contact on.
contact NO
T1=Set time T2=Changeover time
It opens when the power turns off.
■ Specifications (MS4SR)
Type Ordering Input Operation mode Contact Timing
code voltage range
MS4SR MS4SR-AP 100-240V AC Off-start On-off Timed: 2PDT 0.5-6 (×0.1s, s, min, h)
repetitive
MS4SR-CE 24V AC/DC 5A 1-12 (×0.1s, s, min, h)
operation
MS4SR-DL 48-127V DC 2.5-30 (×0.1s, s, min, h)
MS4SR-APN 100-240V AC On-start 5-60 (×0.1s, s, min, h)
MS4SR-CEN 24V AC/DC 03
MS4SR-DLN 48-127V DC
■ Wiring diagram
NC NC
4 5
NO NO
3 6
(–) 2 7 (+)
COM COM
1 8
Input
■ Operation pattern
MS4SR
Operation Operation pattern Remarks
Repeat OFF ON OFF ON OFF ON
TIME TIME TIME TIME TIME TIME
• When power is on, timed contacts on and off every set
Power (2-7)
(Off-start) time interval.
Timed NO (1-3) (8-6)
MS4SR-N
Operation Operation pattern Remarks
ON OFF ON OFF ON OFF
Repeat TIME TIME TIME TIME TIME TIME • When powe is on, timed contacts on and off every set time
Power (2-7)
(On-start) Timed NO (1-3) (8-6)
interval.
Timed NC (1-4) (8-5) • The contacts reset when the power is removed.
Display Power (green)
Output (red)
■ Dimensions, mm
● Bodies MS4SM MS4SA, C, F, Y
48 48 15 66.5
6 52.3 14.2
44.5 sq.
48
48
ø39
Mass : Approx. 100g
48 6 52.3 14.2
44.5 sq
ø39
14
48
8 7 5 6 5 4 3
4
40 ±0.2 40 ±0.2
35.4
35.4
70
70
2-ø4.5 9 3 2-ø4.5
10 11 1 2 7 8 1 2 Mounting hole 2-ø4.5
Mounting hole 2-ø4.5
7.8 7.8
4
4
50 31.2 or less 50
20.3 or less
Mass : Approx. 70g Mass : Approx. 59g
max.
16 49 49 Panel cutting
4.8 39 39
8.3 2-ø4.5
0.8
4.2
58
60.7±0.3
4.1
4.1
40 6
ø28.4
33
33
0
ø3
6 6
Mounting
6
plate
Mass : Approx. 13g Approx. 13g
5
Note: Where ordering the 8GB and 11GB types of surface mounting socket, specify hold-down spring FX3 separately.
Mounting rails
TH35-7.5 TH35-7.5AL TH35-15AL
Steel Aluminum Aluminum
27
25
35
27
35
27
35
20 20 10 20 20 10 20 20 10
900 900 900
■ Dimensions, mm
● Sockets for flush mounting ● Accessories (supplied)
R0.5
+0.5
or less
45 –0
57
50
51
51
57
03
42 42 15 7
48 Adaptor TX4
48 24
ø27 ø27
Terminal M3.5x7 Terminal M3.5x7
5
2 6 7 8 3 4 5 6
26.8
4
45
45
3 9
4 1 11 2 1 8 7
2 10
45 4.5 17.5 5 7
45 5 17 7
5 6
7
4 5
8
4
3 6
ø33
ø33
9
3
2 2 7
10
1 11 1 8
■ Notes on use
Refer to the instruction manual.
■ Specifications
Single timing range types
Type Ordering code Contact Operation Timing range (Refer to Page 03/50) Input voltage Socket
ST7P-2 MS7P2-■ Timed: On-delay 0.06–0.5s 4–60s 0.5–6h 200-230V AC 50/60Hz Screw
2PDT 0.1–1s 0.25–3min 1–12h 100-120V AC 50/60Hz Soldering
0.3–3s 1–10min 2-24h 240V AC 50/60Hz Wire wrap
ST7P-4 MS7P4-■ Timed: 0.4–5s 2–30min 100-110V DC PC board
4PDT 1–10s 4–60min 24V DC
ST7B-2 MS7B2-■ Timed: 2–30s 0.2–2h 12V DC
2PDT
ST7B-4 MS7B4-■ Timed:
4PDT
Notes: Enter the input voltage code in the ■ mark and timing range code in the mark. * Other voltages are available on request, contact FUJI.
■ Technical data
Repeat accuracy ±1% at max. setting time
Reset time 0.1s or less
Max. operating cycle 1800 cycles/h
Operating temperature range –10°C to 50°C
Mechanical durability 50 million operations
Electrical durability 500000 operations at 220V AC 3A resistive load (ST7P-2, 7B-2)
100000 operations at 220V AC 3A resistive load (ST7P-4, 7B-4)
Operating voltage range 0.85 to 1.1 times input voltage
Contact ratings 3A at 220V AC resistive load
Power consumption 1.2VA at 100V AC, 1.5VA at 200V AC, 1.1W at 24V DC
Dielectric strength 2000V AC rms. 1min. between current carrying part and non current carrying part
1500V AC rms. 1min. between output contacts and control circuit
1000V AC rms. 1min. between open contacts
■ Dimensions, mm INPUT
● Bodies ST7 -2 ST7 -4 03
5.7 2.2 (1) 2.2 (1)
ST7P-4, 7B-4
0.5
0.5
UP 1 4 1 2 3 4 1 2 3 4
5 8 5 6 7 8
ø18.5
5 6 7 8
27.8
27.8
9 12
9 10 11 12
9 10 11 12
ON
13 14
13 14
13 14
(–) (+)
X1 X10 4 1.8
52.6 21 21
59
59
69
25
69
25
30
4.5
4.5
23
15 15
2-ø4 (M3, M4)
M3x8 M3x8 9
2-ø4 (M3, M4)
9 Mounting rail width
35mm IEC standard
Mounting rail width
35mm IEC standard
8 5 8 7 6 5
59
2
69
69
12 9 12 11 10 9
4 1 3 2 1
3 5 8 7 6 5
12 9 12 11 10 9
14 13 4 14 13
■ Dimensions, mm
● Sockets/soldering TP88 TP814 Panel cutting
Terminal TP88, 814
Approx.27 Approx.27
TP88R2, 814R2
2.2 2.2
25.8±0.2
0.3
0.3
25.4
28.9
25.4
28.9
3
1.2
Approx.57.6 9 7.3 21.5±0.2 21.5 ±0.2
21 21
2.9 21.6 21.6 Min.27.4
TP88R2 TP814R2
● Sockets/Wire wrap Approx.27
Terminal
Approx.27
5
1.4
28.9
25.4
28.9
25.4
1.05
1.3
2
21
2
21
Approx.57.6 13.1 22 21.6
21.6
2.9
0.3
4.1
4.1
Approx.31
25.4
28.9
28.9
25.4
12.7
12.7
6.4
6.4
8-ø2 4.4 14-ø2
2
21 21
Approx.56.4 9 13.2 13.2
4.3 21.6 21.6
2.9
Sockets
Terminal For ST7P-2, ST7B-2 For ST7P-4, ST7B-4 Finger protection cover
Type Ordering Mass Type Ordering Mass Type Ordering
code (g) code (g) code
Screw terminal, rail mounting TP88X1(M3) MX58X1 35 TR814X1(M3) MX54X1 54 RZ52X1 RZ52X1
Screw terminal, rail mounting TP88X2(M3.5) MX58X2 47 TP814X2(M3.5) MX54X2 51 RZ54X1 RZ54X1
Soldering TP88 MX58 9 TP814 MX54 10 FX14X2 RZ54X2
Wire wrap TP88R2 MX58R2 11 TP814R2 MX54R2 13
PC board TP88B MX58B1 9 TP814B MX54B 10