Professional Documents
Culture Documents
INSPECTION REPORT
(Special for Epidemic prevention materials)
IMPORTANT INFORMATION REGARDING THE SCOPE AND LIMITATIONS OF THE INSPECTION AND REPORT
The scope of this report is limited to a VISUAL INSPECTION ONLY for the workmanship and basic function check of the product.
Performance index and compliance of the product are NOT included in the scope of this report. This report is a reasonable attempt to
identify any obvious or significant defects apparent in those areas of the product fully accessible and visible to the Inspector at the time of
the inspection. This Report is made solely for the use and benefit of the Client named on the front of this report.
Attn :
From : SGS Viet Nam E-mail : Thuy.vu@sgs.com
Inspection Criteria
Reference sample provided by Not Available
Client instruction/specification Yes
SGS WI number SGS-P-INSP-WL-SL-4015111
Other N/A
COSL-FLD-F-9114_V20200428 Page 1 of 18
SGS-P-INSP-WL-SL-4015111
Inspection Summary:
1. Workmanship appearance : Conform
2. Quantity : Conform
3. Style, Material, Colour : Subject to client's evaluation - Pls see problem Remark#1
4. Data measurement / Function/Field tests: Actual finding
5. Packing : Conform
6. Marking / Label : Conform
Problem Remark:
01. No reference sample for comparing at the time of inspection.
Defect photos :
COSL-FLD-F-9114_V20200428 Page 2 of 18
SGS-P-INSP-WL-SL-4015111
COSL-FLD-F-9114_V20200428 Page 4 of 18
SGS-P-INSP-WL-SL-4015111
2. Quantity:
No Inspection Qty.
Number of Cartons
Style / Item/ Article P.O. Order Qty. (Presented Qty. for insp.)
No. Packed Not Packed Not packed
BRAND: DIAMOND,
PRODUCT; POWDER
FREE NITRILE
1 EXAMINATION n/a 500 500 0 500 0
GLOVES, NON-
STERILE, COLOR
BLUE .
Total: 500 500 0 500 0
Remarks: 2 color shade batches could be acceptable for mass production when the difference was grade 4 or above per
the gray scale. However, our comment is for indication only and based on the samples selected, and laboratory analysis
with standard laboratory facility is recommended at cost.
Size S M L XL
LENGTH WIDTH LENGTH WIDTH LENGTH WIDTH LEGHT WITH
Blue 235 105 240 110 240 120 250 115
Blue 240 100 240 110 240 120 245 115
Blue 240 105 240 110 245 120 250 110
White - - - - - -
COSL-FLD-F-9114_V20200428 Page 5 of 18
SGS-P-INSP-WL-SL-4015111
Color/ L
size S M XL
Blue 7 7 6.9 7 7 7 7.1 7.1 7.1 7.1 7.1 7.1
White - - - - - - - - - - - -
COSL-FLD-F-9114_V20200428 Page 6 of 18
SGS-P-INSP-WL-SL-4015111
5. Packing
COSL-FLD-F-9114_V20200428 Page 7 of 18
SGS-P-INSP-WL-SL-4015111
6. Marking / Label:
Carton weight: Carton product XL : 5.0 kgs. Carton product L: 4.7kgs. carton product size M: 4.5kgs, carton product size S: 4.2kgs
Carton size: L x W x H = 36 x 23 x 24
Carton with Metal Staple: N
COSL-FLD-F-9114_V20200428 Page 8 of 18
Room lighting Sufficient
SGS-P-INSP-WL-SL-4015111
Color shading batch checking by grey scale on the samples randomly selected could be applied when applicable at
inspection site and subject to client’s requirement, the result is just preliminary and indicative only, and subject to the
environment, condition and the available facility at site, for more reliable and accurate result, they should be
performed by qualified technician in lab under standard environment and equipment. (Please refer to the Working
Instruction for Grey Scale Use and On-site Testing Method P-INSP-WI-SL-001-01).
7.3. Notice:
SGS inspector already informed the factory to repair the defective samples that we found during inspection,
and reminded the factory to pay attention to assortment during repacking after repairing . Please note
repairing of defective samples and repacking is done by the factory without SGS inspector’s supervision.
Supervision on repairing of defective samples and repacking can be performed by SGS inspector at
another working day upon request by client.
7.4. Others.
01 box size M + 01 box size L pull samples/ SGS tape/ SGS label left at factory to send Client as request.
SGS inspector instructed factory send pull samples package to Client with Client address.
8. Inspection Environment:
Lighting : Room lighting
Sufficient
Inspection place : Warehouse
Inspection done on: Top of cartons
Cleanliness : Clean
Weather condition: Dry
Cargo storage: Orderly, easy to count
9. Attachment
COSL-FLD-F-9114_V20200428 Page 9 of 18
SGS-P-INSP-WL-SL-4015111
COSL-FLD-F-9114_V20200428 Page 10 of 18
SGS-P-INSP-WL-SL-4015111
COSL-FLD-F-9114_V20200428 Page 11 of 18
SGS-P-INSP-WL-SL-4015111
COSL-FLD-F-9114_V20200428 Page 12 of 18
SGS-P-INSP-WL-SL-4015111
COSL-FLD-F-9114_V20200428 Page 14 of 18
Note: This report is issued subject to the Testing and Certification Regulations of the TÜV SÜD Group and the General
Terms and Conditions of Business of TÜV SÜD PSB Pte Ltd. In addition, this report is governed by the terms set out
within this report.
Test Report No. 7191239941-EEC20/02-WBH
SUBJECT: dated 14 Aug 2020
Testing of Examination Gloves submitted by
THANH HUNG PHARMACOGNOSY JSC Production Factory on 01 Jul 2020.
TESTED FOR:
THANH HUNG PHARMACOGNOSY JSC Production Factory No. 6 Phan Dang Luu
Street, Yen Vien Ward, Gia Lam District.
HA NOI City, Vietnam
TEST DATE:
07 Jul 2020 to 07 Aug 2020
DESCRIPTION OF SAMPLES:
Sample
Product Brand/
S/N Size Colour Lot No. Expiry date received Manufacturer
Description Model
(pieces)
Powder Free Diam THANH HUNG
Latex ond PHARMACOGNOSY
1 Examination Glove S Natural DA084154886 05-2023 500 JSC Production
Gloves Factory
Lot size as specified by client: 35,001 pcs to 150,000 pcs
METHOD OF TEST:
ASTM D3578-19 Standard Specification for Rubber Examination Gloves
- Clauses 7.1.2 & 8.3 Freedom from Holes (Cross-reference to Test Method D5151)
- Clauses 7.1.3 & 8.4 Physical Dimensions Test
- Clauses 7.1.4 & 8.5 Physical Requirements Test - Die C, accelerated aging conducted according to Clause
8.5.2.1: temperature of 70±2°C for 166±2h (Cross-reference to Test Method D412 and D573)
- Clauses 7.1.5 & 8.6 Powder-free Residue (Cross-reference to Test Method D6124)
- Clause 7.1.6 & 8.9 Protein Content (Cross-reference to Test Method D5712)
a
TÜV SÜD PSB
Laboratory: Phone : +65-6885 1333 Regional Head Office:
TÜV SÜD PSB Pte. Ltd. Fax : +65-6776 8670 TÜV SÜD Asia Pacific Pte. Ltd.
No.1 Science Park Drive E-mail: enquiries@tuv-sud-psb.sg 1 Science Park Drive, #02-01
Singapore 118221 www.tuv-sud-psb.sg Singapore 118221 TUV
Co. Reg : 199002667R
Page 1 of 4
Test Report No. 7191239941-EEC20/02-WBH
dated 14 Aug 2020
PSB Singapore
RESULTS:
Sample: Powder Free Latex Examination Gloves, Diamond Glove, Lot No. DA084154886, Size S
Table 1: Results for Freedom from Holes
No. of Number Actual no. of non- Inferred
Clause Tests Requirements non-compliers tested compliers found
results
allowed (pieces) (pieces) (pieces)
Page 2 of 4
Test Report No. 7191239941-EEC20/02-WBH
dated 14 Aug 2020
PSB Singapore
RESULTS (cont’d):
Sample: Powder Free Latex Examination Gloves, Diamond Glove, Lot No. DA084154886, Size S
Table 4: Results for Physical Requirements Test - after accelerated aging
Results Number of pieces
Actual Inferred
Requirements
Clause Tests Non- non-
for Type I Min. Mean Max. Tested results
compliers compliers
allowed found
Tensile
strength > 14 16 17 18
7.1.4 (MPa)
1 13 0 Passed
8.5 Ultimate
elongation > 500 704 “732 757
(%)
Table 5: Results for Powder-free Residue
Clause Tests Requirements Result Inferred Results
7.1.5 Powder-free
Powder residue < 2.0 mg 0.84 mg per glove Passed
8.6 residue
f^rin
APPENDIX:
Photo: Powder Free Latex Examination Gloves, Diamond Glove, Lot No. DA084154886, Size S
Page 3 of 4
Test Report No. 7191239941-EEC20/02-WBH
dated 14 Aug 2020
PSB Singapore
Please note that this Report is issued under the following terms :
1. This report applies to the sample of the specific product/equipment given at the time of its testing/calibration. The results are not used to indicate or imply
that they are applicable to other similar items. In addition, such results must not be used to indicate or imply that TÜV SÜD PSB approves, recommends
or endorses the manufacturer, supplier or user of such product/equipment, or that TÜV SÜD PSB in any way “guarantees” the later performance of the
product/equipment. Unless otherwise stated in this report, no tests were conducted to determine long term effects of using the specific
product/equipment.
2. The sample/s mentioned in this report is/are submitted/supplied/manufactured by the Client. TÜV SÜD PSB therefore assumes no responsibility for the
accuracy of information on the brand name, model number, origin of manufacture, consignment or any information supplied.
3. Nothing in this report shall be interpreted to mean that TÜV SÜD PSB has verified or ascertained any endorsement or marks from any other testing
authority or bodies that may be found on that sample.
4. This report shall not be reproduced wholly or in parts and no reference shall be made by the Client to TÜV SÜD PSB or to the report or results furnished
by TÜV SÜD PSB in any advertisements or sales promotion.
5. Unless otherwise stated, the tests were carried out in TÜV SÜD PSB Pte Ltd, No.1 Science Park Drive Singapore 118221.
July 2011
Page 4 of 4