Professional Documents
Culture Documents
中国认可
检测
TESTING
CNAS L12110
Test Report
No.: GDGT-H/R-2023-07010
Sriperumbudur, Kancheepuram-602105.
Trade name:
Table of Contents
i. Test sample ........................................................................................................................3
ii. Test results summary ........................................................................................................3
1 Atmospheric conditions of the test site ...........................................................................4
2 Test site...............................................................................................................................4
3 Referenced regulations and test sequence ......................................................................4
3.1 Referenced regulations .....................................................................................................4
3.2 Sequence of test .................................................................................................................4
4 Test equipment(s) ..............................................................................................................4
5 Test item, conditions, processes, conclusions and figures ..............................................4
5.1 Dustproof test IP6X ..........................................................................................................4
5.1.1 Test conditions ...................................................................................................................4
5.1.2 Test processes ....................................................................................................................5
5.1.3 Test conclusions .................................................................................................................5
5.1.4 Test figures .........................................................................................................................5
5.2 Waterproof test IPX6........................................................................................................8
5.2.1 Test conditions ...................................................................................................................8
5.2.2 Test processes ....................................................................................................................9
5.2.3 Test conclusions .................................................................................................................9
5.2.4 Test figures .........................................................................................................................9
1, The report without " Test report stamp " or "official seal of testing unit" is
invalid.
2, The report is invalid without the signature of the person who prepared,
reviewed and approved it.
Terms and 3, The test results in the report are only valid for the samples submitted for this
Conditions test.
4, The report is invalid if it is altered.
5, If there is any objection to the test report, it should be submitted to the testing
unit within 15 days after receipt of the report, otherwise it will not be accepted
after expiration.
Test Report
i. Test sample
Product name: Solar Inverter;
Product model: WP-330KTL-H1;
Product No.: 1#;
Product quantity: 1 pc;
Receipt of sample: Sent by the applicant;
Test sample arrived: Jul.05,2023;
Sample description: Before the test, the sample under normal temperature was inspected by
the eye, and the appearance was intact.
2 Test site
Building No.4, Modern Enterprise Accelerator, No.24 Industrial East Road, Songshan Lake.
4 Test equipment(s)
Table 2 Test equipment list
Equipment name Equipment model Serial No. Validity period
Fig 11 1# Anti-contact hazardous parts test Fig 12 1# Anti-contact hazardous parts test
Fig 13 1# Anti-contact hazardous parts test Fig 14 1# Anti-contact hazardous parts test
Fig 17 1# Internal inspection after test Fig 18 1# Internal inspection after test
Fig 19 1# Internal inspection after test Fig 20 1# Internal inspection after test
Fig 21 1# Internal inspection after test Fig 22 1# Internal inspection after test
5.2 Waterproof test IPX6
5.2.1 Test conditions
1. Inner diameter of nozzle: 12.5mm;
2. Water flow: 100L/min;
3. Distance from nozzle to sample surface: 2.5m ~ 3m;
Guangdong Sushi Guangbo Testing Technology Co., Ltd.
Building No.4/5, Modern Enterprise Accelerator, No.24 Industrial East Road, Songshan Lake, Dongguan, P.R. China.
Certificate Search: http://www.stigd.com Tel:0769-26268019 E-mail: ssgb@stigd.com Page 8 of 12
Guangdong Sushi Guangbo Testing
Technology Co., Ltd.
No.: GDGT-H/R-2023-07010
Fig 37 1# Internal inspection after test Fig 38 1# Internal inspection after test
Fig 39 1# Internal inspection after test Fig 40 1# Internal inspection after test
Fig 41 1# Internal inspection after test Fig 42 1# Internal inspection after test
Fig 43 1# Internal inspection after test Fig 44 1# Internal inspection after test
— — End of Report — —