Professional Documents
Culture Documents
Main functions
ELITE 1(2)
Main functions 24/09/2021 6:10:42 p. m.
There are two diagnostic operating mode available: real mode and demo mode.
In demo mode most functions of the diagnostic tool are available an can be tried
without connecting an ECU.
The required mode can be selected by clicking the arrow in the right side of the button.
Pressing the button starts the application required to perform diagnostics on the selected ECU. For supported but not
installed ECUs this button is not available.
Pressing this buttons results that automatic ECU detection will be performed. See also: detection window
If the diagnostic tool of the selected ECU requires or provides additional command line options, these options can be
activated/deactivated here. See also: diagnostic options
Pressing this button launches the software upgrade tool for Universal Diagnostic Interface unit (UDIF) if the tool is
installed. Otherwise this button remains inactive.
Pressing this button launches the license manager tool assigned to the diagnostic application of the selected ECU. If
no such tool is installed this button remains inactive.
This button displays the communication device settings window of KB-Starter. See also Communcation device
settings
This button displays the options window of KB-Starter. See also KB-Starter options
Close (13)
ELITE 2(2)