Professional Documents
Culture Documents
Detection errors
The following errors can occur during the automatic ECU detection :
Connected ECU is not ECU is properly connected but not - Check that the installed diagnostic tool
supported! supported by the installed supports the connected ECU. The list of
diagnostic softwares supported ECUs usually can be found in the
diagnostic tool manual.
Incorrect UDIF Incorrect software version of the - Update software in the UDIF. The diagnostic
version! UDIF tool installation package usually contains the
required UDIF software version and the tool
for the software upgrade.
ECU not found! Communication device (UDIF, - Check that cables between the computer and
VectorCardX/XL, RP1210 device the communication device are properly
etc.) is not properly installed or connected.
connected.
- Check the cables for physical damage
ELITE 1(1)