Professional Documents
Culture Documents
S-3 TEST FORM AVANTI RAIL SYSTEMS - EN-ACA07 (Ok)
S-3 TEST FORM AVANTI RAIL SYSTEMS - EN-ACA07 (Ok)
20/05/2015 DIONES/PAULO
Date and year: Competent's name:
RIACHÃO ACA130415T07
Address of installation: Tower No./Serie Nº.:
OK not OK
2 Mounted at least every 3rd step from bottom and up X
OK not OK
3 At each fitting the nut are tightened with 8 nm X
OK not OK
4 Fittings got proper shape without holes and cracks X
OK not OK
All hammerhead bolts are mounted with head marking indicating
5 X
proper head angel of 70° to the rail
OK not OK
6 General all fittings are found in good condition X
OK not OK
12 Has normal shape and no deep scratches, cracks or dents X
OK not OK
13 Looking from front, does the guide claque sit at the left side X
OK not OK
The guide claque has normal shape and no deep scratches,
14 X
cracks or dents
OK not OK
All hammerhead bolts are mounted with head marking indicating
15 X
proper head angel of 70° to the rail
OK not OK
16 General the whole rail arrangement are found in good condition X
OK not OK
18 Top and bottom stop are mounted and tightened with 8 nm X
OK not OK
19 Label and marking is legible X
OK not OK
Entire rail installation found with good and safe characteristics
20 X
(final approval)
OK not OK
Are hammerhead bolts and knots (self locking) in stainless
21 X
material
Properly mounted End-stop(s) with 8 nm torque in the OK not OK
22 X
hammerhead bolts are needed
Final Test/Overall Disposition: Is the ladder in overall in good condition? Signature of competent:
Competent inspection may only be performed by AVANTI or Competent person certified by AVANTI. Each 12th month competent inspection has to be carried out, and this filled form must be filed for
possible later reference.