Professional Documents
Culture Documents
Computer System
SERVICING
Servicing
NCII Guidelines
NCII GUIDE
Configure the router using your web browser to access it's interface
a. In order to access the router’s interface, look for its IP address at the back of
the device. If it’s not there, you can ask the assessor. If the router’s address is
indicated on the back of the device but you are unable to access it using that
address, reset first the router by pressing the power button for 10 to 20 seconds.
Usually, the password to access the interface is indicated also on the device. Ask
the assessor if otherwise.
b. Create the DHCP Pool as instructed; the ranges will be given by the assessor.
c. Change the SSID and configure wireless security using WPA2.
d. Configure DHCP reservations.
Configure the Access Point
a. Same steps as the router, you just have to change its SSID and IP configuration
that corresponds with the IP subnet you are using.
ow, connect the laptop to the access point.
b. Test interconnectivity of all the devices by using the “PING” command. Make
sure the devices got the correct IP addresses reserved to them.
c. Create folders on all the devices, share the folders and make sure everyone has
read/write permissions.
d. Show your work to the assessor, he will give you instructions to test your work.
COC 3: Setup Computer Servers
➢DHCP Server
➢DNS Server
➢File Services
➢Remote Desktop
Setup Computer Servers
COC 4: Back up and Restore