Professional Documents
Culture Documents
BLOCK DIAGRAM
Fault Detection
●
Output 1..4
Inputs 1..4
●
Gate
Logic Control
●
●
●
Short Circuit
Four Fold Protection
Ground
GND 1 20 GND
N.C. 2 19 N.C.
IN1 3 18 IN4
IN2 4 17 IN3
OUT1 5 16 OUT4
VBAT 6 15 R
OUT2 7 14 OUT3
DO 8 13 DI
CL 9 12 SY
GND 10 11 GND
SO20POW
PIN FUNCTION
N° Pin Function
3 IN1 Input 1
4 IN2 Input 2
5 OUT1 Output 1
7 OUT2 Output 2
9 CL Clock
12 SY Synchronization
13 DI Serial Data In
14 OUT3 Output 3
15 R Reset
16 OUT4 Output 4
17 IN3 Input 3
18 IN4 Input 4
2/9
L9651
THERMAL DATA
Symbol Parameter Value Unit
ELECTRICAL CHARACTERISTCS (6.5V < VBAT < 25V, -40 < TJ < 150°C)
Symbol Parameter Test Condition Min. Typ. Max. Unit
Supply Voltage
VBATU Turn on threshold voltage 2.0 4.7 V
IBAT Supply current VBAT = 14V 4 10 15 mA
VOUTi > 0V
Output stage
RDSON On resistance VBAT = 14V
TJ = 25°C; Iout = 1A 500 m
VBAT = 14V
TJ = 150°C; Iout = 1A 850 m
3/9
L9651
4/9
L9651
< tv
Fault: Open Load or Short to GND
o. k.
H
DI Di1 Di2 Di3
L tvhold
H
SY
L
tvset
1/fCL
H
CL
L
tvDV
H
DO Bit1 Bit2 Bit3 Bit4 Bit5 Bit6 Bit7 Bit8 Di1 Di2 Di3
L
tv
5/9
L9651
H H o.k.
H L short to battery
L L short to ground
VINi
VINiH
VINiL
t
VOUTi
VCL
0.8VCL
sOFF
VBAT
0.8VBAT
sON
0.2VBAT
tdon tdoff t
6/9
L9651
VBAT ● ● ● ● ● ● ●
5 Volt RESET
● ● ●
Regulator
VCC
● ● ● ●
R R R
IN1 OUT1
IN2
●
OUT2
Further
IN3 OUT3 driver ICs
Controller
IN4 OUT4 with
● DO DO 4-Wire- DI
SY DI SY Diagnostic
CL CL
● ●
● ●
7/9
L9651
mm inch
DIM.
MIN. TYP. MAX. MIN. TYP. MAX. OUTLINE AND
A 3.6 0.142 MECHANICAL DATA
a1 0.1 0.3 0.004 0.012
a2 3.3 0.130
a3 0 0.1 0.000 0.004
b 0.4 0.53 0.016 0.021 Weight: 1.9gr
N N R
a2 A
c
a1
b e DETAIL B
DETAIL A E
e3
H DETAIL A
lead
D
a3 slug
DETAIL B
20 11 0.35
Gage Plane
-C-
S SEATING PLANE
L
G C
BOTTOM VIEW (COPLANARITY)
E2 E1
E3
1 1 0
PSO20MEC
D1
h x 45˚
0056635 I
8/9
L9651
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
ST PRODUCTS ARE NOT DESIGNED OR AUTHORIZED FOR USE IN: (A) SAFETY CRITICAL APPLICATIONS SUCH AS LIFE
SUPPORTING, ACTIVE IMPLANTED DEVICES OR SYSTEMS WITH PRODUCT FUNCTIONAL SAFETY REQUIREMENTS; (B)
AERONAUTIC APPLICATIONS; (C) AUTOMOTIVE APPLICATIONS OR ENVIRONMENTS, AND/OR (D) AEROSPACE APPLICATIONS
OR ENVIRONMENTS. WHERE ST PRODUCTS ARE NOT DESIGNED FOR SUCH USE, THE PURCHASER SHALL USE PRODUCTS
AT PURCHASER’S SOLE RISK, EVEN IF ST HAS BEEN INFORMED IN WRITING OF SUCH USAGE, UNLESS A PRODUCT IS
EXPRESSLY DESIGNATED BY ST AS BEING INTENDED FOR “AUTOMOTIVE, AUTOMOTIVE SAFETY OR MEDICAL” INDUSTRY
DOMAINS ACCORDING TO ST PRODUCT DESIGN SPECIFICATIONS. PRODUCTS FORMALLY ESCC, QML OR JAN QUALIFIED ARE
DEEMED SUITABLE FOR USE IN AEROSPACE BY THE CORRESPONDING GOVERNMENTAL AGENCY.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.