Professional Documents
Culture Documents
- Grouping of products
Performance
Manual valves: Automatic controls: improving
SVL, Safety ICS, EVRA automation:
ICM, ICF, AKS 4100
• SVA,REG,CHV,SCA-X,FIA
• SVA DH-DL size 250 / 300
• STC (PS 25 bar)
Cap O-ring
Spring loaded
Packing gland
Teflon ring
Grease
Identification ring
Spindle
O-ring
Bolts Packing washer
- Aluninium
Valve bonnet Gasket
Balls
Soft back seat
Overhual kit
Spare part
Inspection kit Repair kit
Identification
ring Spindle
Bonnet,Flange
Gasket O-ring
- non asbestos
Spring loaded
Housing Teflon ring
Disk spring O-ring
Packing gland
Valve bonnet
Marking label
Bolts
Spring loaded
Teflon ring
Gasket
Packing washer Fiber, non asbestos
- Aluminium
Housing
Spring
Spring ring
Guide sleeve
Valve plate
Cylinder with seat
Teflon ring
O-ring
Gasket
Filter element
Housing
Marking label
- Aluminium
Packing washer
- Aluminium
Pressure relief (screw)
Cover
Bolts
- Stainless steel
ICF/EVRAT
SI
P
S II
NEW
ICLX Valve
Top part is square shape; 4 bolts Top part is circle shape; 8 bolts
Keep plastic cap closed, the internal surface of valve is sensitive!!....remove when prior to weld only
For ICS ; don’t for get blank plug and their insert
Blanking plug A + B
This picture shown both
A and B had put together
For ICLX ; in box along with gasket set, had included 1 EVM NO, EVM NC, 2
screws for change over 2 to 1 step, External for Pilot and damping orifice
Noted
ICM 20 / ICMTS 20
ICAD 600A ICM 25
ICAD 600A-TS ICM 32
Encoder: Yes
ICM 40
ICM 50
ICM 65
ICAD 1200A
Encoder: Yes
ICM 100
ICM 125
ICM 150
Current version
After Sep 2017 Old version
Before Sep 2017
Improved of seal
(Metaglass)
PWD
Level
2
ICM
(open)
Liquid line from
Receiver/Intermediate cooler
Liquid pump