Professional Documents
Culture Documents
The report shall contain the following. The report shall be printed and Spiral hard bound.
FORMAT FOR PROJECT REPORT:
Sequence of pages:
Front Cover Page (see Annexure - A)
Certificate (see Annexure - B)
Sponsorship Certificate (If applicable)
ii Acknowledgement
iii. Abstract
iv Contents
v Notations(if applicable)
vi List of Tables (if applicable)
vii List of Figures (if applicable)
CHAPTER 1 INTRODUCTION (This consists of: 1.1 Introduction of the INTERNSHIP
Work; 1.2 Details of internship, 1.3 Objectives and 1.4 Scope of the INTERNSHIP Work).
CHAPTER 2 LITERATURE REVIEW (It shall include theoretical support, regarding
INTERNSHIP work done, methods established, any new approach. It should preferably
highlight the development in the field of Civil Engineering as reflected from books, journals,
Site, Software training etc.)
CHAPTER 3 INTERNSHIP (It shall include a flow chart and then detailed INTERNSHIP
work or Course Done)
OR
CHAPTER 3 DEVELOPMENT OF MODEL(S) / Drawing / Design (If INTERNSHIP is
done with aid of soft computing tools/ course, It shall include a flow chart and then detailed
methodology of the INTERNSHIP work)
CHAPTER 4 CASE STUDY (If INTERNSHIP work is done with aid of soft computing tools
or design based project work)
CHAPTER 5 DISCUSSIONS and OUTCOMES (based on type of INTERNSHIP work )
CHAPTER 6 CONCLUSION
REFERENCES and BIBLIOGRAPHY (The references and bibliography shall include name
of author/code/manual/book, title of paper/code/manual/book, name of the journal, month &
year of publication, volume number/ISBN number, page number x-y. The references and
bibliography shall be as per universal standards as mentioned in any international journal of
professional body.)
WEBOGRAPHY (If any matter is referred from website then write name of website e.g.
www.environment-agency.gov.uk and write few lines about referred website which indicates
purpose or use of website).
LIST OF PUBLICATIONS (see Annexure - C) (If applicable)
PAPER(S) PRESENTED IN CONFERENCE (see Annexure - D) (If applicable)
POSTER(S) PRESENTED IN CONFERENCE (see Annexure - E) (If applicable) DETAILS
OF PATENT(S) (see Annexure - F) (If applicable)
AWARD(S) (see Annexure - G) (If applicable)
APPENDIXES (If applicable)
Note: Other relevant chapters can be incorporated as per the theme of the INTERNSHIP
work (If applicable) like details of materials, manufacturing process of an industry,
fabrication details of working model, procedure for operating software etc..
Internship Report On
In the partial fulfillment of the requirement for Third Year BTech Degree in Civil Engineering
Submitted by
CERTIFICATE
This is to certify that the ……………. have satisfactorily carried out Internship work entitled
“ ………………..”.
This work is being submitted in the partial fulfillment of Third Year BTech Degree in Civil
Engineering. It is submitted of the prescribed syllabus of Sanjivani College of Engineering, An
Autonomous Institute, Affiliated to Savitribai Phule Pune University, Pune for the academic year
2021 – 2022.
Roll No. Name of the Student (Examination Seat No. )
D.D.More
(Guide & Assist.Prof. Dept. of Civil Engg.) (External Examiner)