Professional Documents
Culture Documents
This Study Resource Was: Chapter 10: Facility Layout
This Study Resource Was: Chapter 10: Facility Layout
Overview
This chapter defines layout planning and its importance. Process and product layouts are
identified, described and compared. The steps for designing product and process layouts
are described and demonstrated. Two additional layouts, which are the hybrid layout and
group technology (cell) layout, are explained.
1. Explain the importance of layout planning for a business. What are the consequences
of a poor layout?
Layout planning is important because it can significantly affect the productivity and
m
service quality. Some consequences of poor layout are increased costs, confused and
er as
frustrated customers, and poor communication and information flows.
co
eH w
2. Explain the importance of layout planning for everyday life. How has poor layout
o.
planning affected your life?
rs e
ou urc
It has caused me to expend time and energy for extra movements within my home or
at the university. For example, I have taught in a classroom where the computer is in
a structure in the corner of the front of the room. The table extended part of the way
o
across the front of the room. I often lectured using PowerPoint. So I needed to keep
aC s
walking back and forth from being close to the students to the mouse to be able to
vi y re
change the slide. I have now compensated for this problem by using a remote mouse.
In addition, the screen covered the entire whiteboard, thus making it impossible to
write on the board and have a slide or overhead projected on the screen at the same
time.
ed d
ar stu
The four types are process, product, hybrid and fixed-position layouts. A process
layout groups similar processes or functions. Process layouts use general purpose
is
resources, are less capital and more labor intensive, are flexible, have slower
Th
processing rates, have higher material handling costs, are more difficult to schedule
and need more space. A product layout arranges resources in a line flow. Product
layouts use specialized resources, are capital intensive, have higher processing rates
and lower material handling costs, need less space and are relatively inflexible. A
sh
hybrid layout combines aspects of both product and process layouts. A fixed-position
layout is used when the product can not be moved. The workers and equipment move
around the products as needed.
This study source was downloaded by 100000831009911 from CourseHero.com on 09-30-2021 13:17:02 GMT -05:00
https://www.coursehero.com/file/12787477/Facility-Layout/
To design a process layout, we have to gather information, develop a diagram of the
space to be used and a detailed layout of the space. We need information concerning
the amount of space needed for each resource and the closeness measures between
resources, such as number of trips or closeness ratings concerning the desirability of
locating each department pair close together. The diagram of the space is used to
make sure that the space is large enough for all resources.
In a grocery store, all the fruit and vegetables are located together, while all the
freezer items are located together.
m
er as
Identify tasks and their immediate predecessors.
co
eH w
Determine output rate.
Determine cycle time.
o.
rs e
Compute the theoretical minimum number of stations.
ou urc
Assign tasks to workstations.
Compute efficiency, idle time and balance delay.
o
7. Find an example of a product layout in local businesses. Draw a picture to show the
aC s
In some cafeterias, there is one line flow starting with the pickup of a tray and
silverware. The food and drink areas are typically in this order:
ed d
Salads
ar stu
Dressing
Bread
Entrees
is
Vegetables
Th
Dessert
Drinks
Sometimes desserts are placed before the entrees. The cash register is at the end of
sh
the line.
8. Explain the concept of cycle time and how it affects output. Give an example.
Cycle time is the maximum production time at any workstation on the line. One
product is moved from one station to the next every cycle time. One unit will be
This study source was downloaded by 100000831009911 from CourseHero.com on 09-30-2021 13:17:02 GMT -05:00
https://www.coursehero.com/file/12787477/Facility-Layout/
finished on the line every cycle time. The cycle time has an inverse relationship with
the production rate. For example, when the cycle time increases, the production rate
decreases.
10. Give an example of a poor layout. Find a better solution for that layout problem.
I have taught in classrooms with a poor layout. Not having tiered seating makes it
difficult for students to see the board/screen. Having the entrance to the classroom by
the front of the room (where the board is) is disruptive since everyone sees the arrival
and departure of students during class (i.e. late arrivals). I dislike having a screen that
m
er as
covers the entire board. If I want to move back and forth between using the screen
and board, I have to raise and lower the screen each time.
co
eH w
o.
rs e
ou urc
o
aC s
vi y re
ed d
ar stu
is
Th
sh
This study source was downloaded by 100000831009911 from CourseHero.com on 09-30-2021 13:17:02 GMT -05:00
https://www.coursehero.com/file/12787477/Facility-Layout/
Powered by TCPDF (www.tcpdf.org)