Professional Documents
Culture Documents
Main Bearing, Crankshaft and Cylinder Block Component
Main Bearing, Crankshaft and Cylinder Block Component
1 из 1
1D
Main Bearing, Crankshaft and Cylinder Block
Component
Main bearing Tighten 20 N·m (2.0 kgf-m, 14.5 lbf-ft) and 62° by
:
: Do not apply oil between the specified procedure.
3. cylinder block and bearing and
between, main bearing cap
and bearing.
5. Main bearing cap (other than Apply engine oil to inside / sliding surface.
No.1) :
file://G:\Xml\S8T40A\navi\top.html 28.02.2014